Suitable for all models water boiler
Water Boiler
Instruction Manual
Safety Tips
IMPORTANT SAFEGUARDS:
When using electrical appliances, basic safety precautions should always be followed, including
the following:
Read all instructions.
To protect against fire, electric shock and injury to persons, do not immerse the cord, plugs,
or the appliance in water or other liquids.
Unplug from outlet when not in use and before cleaning. Ensure it’s cool before putting on or
taking off parts, and before cleaning the appliance.
Do not touch hot surface body to avoid scalding. Use handles or knobs.
Never switch on the appliance if there is no water in the tank.
Always use the appliance on a dry, level and heat-resistant surface away from any edges.
Ensure hands are dry before using the appliance.
When this appliance produces is boiling water – ensure the unit is out of reach for children.
Children should be supervised to ensure that they do not play with the appliance.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or has been damaged in any manner. Return appliance to the nearest
authorized service facility for examination, repair or adjustment.
Scalding may occur if the lid is removed during the brewing cycles.
Please read this instruction manual carefully before
using the appliance and keep them available at all time!
This appliance is intended to be used in household and similar applications such as:
– staff kitchen areas in shops, offices and other working environments;
– farm houses;
– by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments.
Save this instruction
THE APPLIANCE MUST BE EARTHED INSTALLATION:
Before using the appliance, first clean the tank, top cover and body, etc.
Place the unit upright on a firm and flat surface.
Plug the appliance into an earthed socket while the unit is switched off.
THE UNIT IS NOW READY TO USE
1.WARNING:
The outside of the appliance gets very hot during boiling. Do not touch the surface body.
Do not remove the top cover while boiling.
If the appliance is overfilled, boiling water may spill out of the unit.
2.HOW TO BOIL WATER:
a) Turn the lid anti clockwise to open.
b) Fill the tank with tap water. Make sure the water is below the "MAX " water level indicator.
c) Replace the lid and turn clockwise to lock into place.
d) Connect the plug and the socket.
e) Switch ON. The "HEATING" pilot lamp will light up and the water starts to heat up. It works in
this way until the "HEATING" pilot lamp goes out and the "KEEP WARM" pilot lamp lights up,
showing that the appliance is in the state of preserving heat.
f) Use the faucet to dispense water.
g) When about three cups of water are remaining in the tank, turn the appliance off and unplug
it from the electric outlet.
h) Always make sure at least three cups of water are remaining in the tank to prevent the
boil-dry accident.
3.RESET THERMAL CUT-OUT:
The appliance is fitted with a dry-protect thermal cut-out. If this is activated, the unit will turn itself
CAUTION!
Do not touch the metal body when water boiler is in use!
Hot surface. Take special care when removing lid!
Hot steam may burn!
off, when no water in the tank. This can protect the heating elements and inner facility. The unit is
in no electric condition and must be unplugged before it can be reset. To reset the appliance, wait
until the unit has been cooled down. Then press the reset button like a pin at the bottom of the
appliance. The appliance can work normally.
This safety device may have been switched off during transport, if so reset the thermal cut-off
following the above instructions.
If resetting this thermal cut-out does not switch the unit back on, please contact the nearest
authorized service facility for examination, repair or adjustment.
4.CLEANING THE APPLIANCE
This unit must be cleaned thoroughly after each use. This is in addition to weekly cleaning using
vinegar to remove mineral deposits. If these deposits are not removed, pitting of the metal can
occur and may result in damage to the appliance.
5.CLEANING AND DESCALING AFTER USE:
Regular cleaning
a) CAUTION!
Be sure to unplug the unit, discard any remaining water and allow to cool down before
cleaning.
b) DISCOLORING OF THE WATER TANK
This is caused by oxidizing of iron content in tap water. It can be removed by using nylon
brush and follow these simple steps:
a. Cut a lemon into four, wrap the lemon in cloth and place inside the unit.
b. Pour water up to the full water level indicator.
c. Boil the water and let the mixture remain inside the unit for about 1 hour.
d. Pour out the water and use a nylon brush to clean the inner part.
e. To remove the smell of the lemon, boil water again, and dispose the water.
c) Lid and tank are washable with soap and water.
d) Use damp cloth to clean the body. Wipe it dry. Do not use abrasive materials to avoid
scratches.
e) Don't wash by running water.
Descaling
Hard water may cause stone deposits to form in the water tank, lengthening the time needed
to heat water and possibly causing damage to the device. Use filtered water if possible to
avoid deposits forming!
WARNING!
Re-Switch-on by hand when short-circuit
press down from the socket
press down the small pole with your finger until the red lamp is on
THE ELECTRIC CIRCUIT DIAGRAM:
USAGE PARAMETERS:
Model No.
Power
Volume
Max Level
Capacity
Voltage
Environmental
temperature in use
Environmental
humidity in
use
ENW-68DR
950W
6.8L
6L
220-240V/50Hz
10-38degree
Less than
90%
ENW-100DR
1600W
10L
8.5L
220-240V/50Hz
10-38degree
Less than
90%
ENW-200DR
2500W
20L
14.1L
220-240V/50Hz
10-38degree
Less than
90%
ENW-300DR
2800W
30L
19.1L
220-240V/50Hz
10-38degree
Less than
90%
SAFETY INSTRUCTION FOR MAINTENANCE
Inspect the power cable regularly for damage. Never use the device if the cable is damaged.
If the power cable is damaged, have an authorised service center or qualified electrician
replace it.
In case of damage or malfunction, please contact your stockist or our customer service
center.
Only a qualified technician and using original spare parts and accessories should carry out
repairs and maintenance of the device. Do not attempt to repair the device yourself.
WASTE DISPOSAL
Discarding old devices
At the end of its service life the discarded device has to be disposed in accordance with the
national regulations. It is advisable to contact a company which is specialized in waste disposal,
or just contact the local disposal service in your community.
WARNING! To exclude any abuse and the dangers involved make the waste device unfit for use
before disposal. For that purpose disconnect device from mains supply and remove mains
connection cable from the device.
NOTE! For the disposal of the device please consider and act according to the national and local
rules and regulations
WARRANTY
iMettos warrants to the original purchaser of every new product, under normal and proper use
and maintenance service as specified by iMettos and upon proper installation and start-up in
accordance with the instruction packet supplied with each unit. iMettos’ obligation under this
warranty is limited to a period of two(2) year from the date of original installation.
WARRANTY CLAIMS
All claims for parts must be made directly through iMettos. All claims should include:
Personal Details: Products Details:
Your name: Model number:
Your company: Serial number of the product:
Address: Date of purchase:
Email: Proof of purchase :
Phone:
Pertinent information supporting the existence of the alleged defect.(Such as picture etc.)
Please send the above information to services@imettos.co.uk
Our warranty departments will according to the actual situation and reply you within 24hours.
iMettos Limited
www.imettos.co.uk
Loading...