iMettos ENW-68DR, ENW-300DR, ENW-100DR, ENW-200DR Instruction Manual

Suitable for all models water boiler

Water Boiler

Instruction Manual

Safety Tips

IMPORTANT SAFEGUARDS:

When using electrical appliances, basic safety precautions should always be followed, including
the following:

 Read all instructions.

 To protect against fire, electric shock and injury to persons, do not immerse the cord, plugs,

or the appliance in water or other liquids.

 Unplug from outlet when not in use and before cleaning. Ensure it’s cool before putting on or

taking off parts, and before cleaning the appliance.

 Do not touch hot surface body to avoid scalding. Use handles or knobs.

 Never switch on the appliance if there is no water in the tank.

 Always use the appliance on a dry, level and heat-resistant surface away from any edges.

 Ensure hands are dry before using the appliance.

 When this appliance produces is boiling water – ensure the unit is out of reach for children.

Children should be supervised to ensure that they do not play with the appliance.

 This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.

 If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or

similarly qualified persons in order to avoid a hazard.

 Do not operate any appliance with a damaged cord or plug or after the appliance

malfunctions, or has been damaged in any manner. Return appliance to the nearest
authorized service facility for examination, repair or adjustment.

 Scalding may occur if the lid is removed during the brewing cycles.

Please read this instruction manual carefully before
using the appliance and keep them available at all time!

 This appliance is intended to be used in household and similar applications such as:

– staff kitchen areas in shops, offices and other working environments;
– farm houses;
– by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments.

 Save this instruction

THE APPLIANCE MUST BE EARTHED INSTALLATION:

 Before using the appliance, first clean the tank, top cover and body, etc.
 Place the unit upright on a firm and flat surface.
 Plug the appliance into an earthed socket while the unit is switched off.

THE UNIT IS NOW READY TO USE

1.WARNING:

 The outside of the appliance gets very hot during boiling. Do not touch the surface body.
 Do not remove the top cover while boiling.
 If the appliance is overfilled, boiling water may spill out of the unit.

2.HOW TO BOIL WATER:

a) Turn the lid anti clockwise to open.
b) Fill the tank with tap water. Make sure the water is below the "MAX " water level indicator.
c) Replace the lid and turn clockwise to lock into place.
d) Connect the plug and the socket.
e) Switch ON. The "HEATING" pilot lamp will light up and the water starts to heat up. It works in

this way until the "HEATING" pilot lamp goes out and the "KEEP WARM" pilot lamp lights up,

showing that the appliance is in the state of preserving heat.
f) Use the faucet to dispense water.
g) When about three cups of water are remaining in the tank, turn the appliance off and unplug

it from the electric outlet.
h) Always make sure at least three cups of water are remaining in the tank to prevent the

boil-dry accident.

3.RESET THERMAL CUT-OUT:

The appliance is fitted with a dry-protect thermal cut-out. If this is activated, the unit will turn itself

CAUTION!

Do not touch the metal body when water boiler is in use!
Hot surface. Take special care when removing lid!
Hot steam may burn!