IMC SP12, SP25 Installation And Operating Manual

SP-RANGE

INSTALLATION AND OPERATING MANUAL

PLEASE LEAVE WITH OPERATOR

SP12 & SP25 – SERIES 4

Imperial Machine Company Limited
Unit 1, Abbey road
Wrexham Industrial Estate
Wrexham, LL13 9RF
Tel: [phone]
Fax: [phone]
Service Fax: [phone]
Spares Fax: [phone]
E-mail: [e-mail]
Website: www.imco.co.uk

A34/013 R14 ECN 8308 June 2015

SP-Range

EC DECLARATION OF CONFORMITY

(Guarantee of Production Quality)

We, Imperial Machine Company Limited of:
Unit 1, Abbey Road, Wrexham Industrial Estate, Wrexham, LL13 9RF
Declare under our sole responsibility that the machine

SP12 & SP25 SERIES 4

As described in the attached technical documentation is in conformity with the Machine Safety
Directive 98/37/EC and is manufactured under quality system BS EN ISO 9001. It is also in
conformity with the protection requirements of the Electro Magnetic Compatibility Directive
2004/108/EEC and is manufactured in accordance with harmonised standards EN 61000-6-1
Immunity and EN 61000-6-3 Emissions (plus product specific standards).
It also satisfies the essential requirements of the Low Voltage Directive 2006/95/EC and is
manufactured in accordance with harmonised standard EN 60204-1 Safety of Machinery
(Electrical Equipment).

Approved by S Witt, Managing Director

Signed at Wrexham, June 2015

INDEX

SP-Range

GUARANTEE ....................................................................................................... 1

DELIVERY ............................................................................................................ 1

SAMPLE RATING LABEL ................................................................................... 1

INTRODUCTION .................................................................................................. 2

YOUR PEELER .................................................................................................... 2

CONTROLS ................................................................................................ .......... 3

INSTALLATION .................................................................................................... 3

WATER SUPPLY ................................................................................................. 4

WASTE OUTLET CONNECTION ......................................................................... 4

WASTE EJECTOR ................................ ................................ ............................... 5

Fitting the waste ejector ................................................................ ................. 5

Waste Ejector adjustments ............................................................................ 5

ELECTRICITY SUPPLY CONNECTION .............................................................. 6

COMMISSIONING ................................ ................................ ................................ 7

OPERATION ......................................................................................................... 7

SAFETY ................................................................................................ ................ 8

CLEANING ................................................................ ........................................... 8

DO’S AND DON’TS .............................................................................................. 9

MATERIAL CONTENT ................................................................ ......................... 9

MAINTENANCE ................................................................................................. 10

ORDERING SPARE PARTS .............................................................................. 10

WIRING DIAGRAM 1PH UNITS ......................................................................... 11

WIRING DIAGRAM 3PH UNITS ......................................................................... 12

PARTS ILLUSTRATION..................................................................................... 13

SPARES PART LIST .......................................................................................... 14

1PH CONTROL BOX SPARE PARTS LIST ...................................................... 15

3PH CONTROL BOX SPARE PARTS LIST ...................................................... 16

1

SP-Range

GUARANTEE

This equipment is guaranteed by IMC for 2 years from the date of its purchase
from IMC, or from one of its stockists, dealers or distributors. The guarantee is
limited to the replacement of faulty parts or products and excludes any
consequential loss or expense incurred by purchasers. Defects which arise from
faulty installation, inadequate maintenance, incorrect use, connection to the wrong
electricity supply or fair wear and tear are not covered by the guarantee.

damages/shortages must be reported to IMC within 24 hours of accepting delivery. No
claims for damages will be considered if the goods have been onward delivered by you.

Any

Please observe these instructions carefully.

The guarantee applies in this form to installations within the United Kingdom only.

DELIVERY

The packaged machine consists of:

Peeler Unit, with lid, control box and mounting

1

bracket
Peeling plate 1
Water supply pipe and 2 hose clips 1
1m long 3” flexible waste hose and hose clip 1
Instruction Booklet 1

If any accessories have been ordered they will be supplied in separate packages.
Please notify both the carrier and the supplier within three days of receipt if
anything is missing or damaged.
Check that the correct machine has been supplied and that the voltage, marked on
the rating label, is suitable for the supply available. The rating label is located at the
back of the cylinder near the supply cable inlet.

SAMPLE RATING LABEL

SP-Range 2

INTRODUCTION

This machine is intended for peeling potatoes. Its use may be extended to other
root vegetables. It is not recommended to use this machine for peeling onions.

YOUR PEELER

SPLASH COVER

LID

DOOR

CONTROL BOX

CHUTE

DOOR HANDLE

MOUNTING
BRACKET

WASTE OUTLET