IMC IMCLM-ST Operation & Instruction Manual

INTERNATIONAL MACHIINE CONCEPTS

Operation Instruction

Manual

IMCLM-ST

Vertical Round Bottle Labeling Machine

INTERNATIONAL MACHIINE CONCEPTS

CONTENT

1 Introduction ....................................................................................................... 5

1.1System component ........................................................................................ 5

1.2 System parameter: ....................................................................................... 5

1.3 Human-computer interface: ....................................................................... 5

1.3.1 Human-computer interface ................................................................... 5

1.3.2 Operation system start: .......................................................................... 6

1.3.3 Boot screen: ........................................................................................... 7

1.3.4 Operation running interface: ................................................................ 7

1.3.5 Parameter set interface: ........................................................................ 8

2 Overview ............................................................................................................. 9

3 Principle and Structure ................................................................................... 10

3.1 .1Outline .................................................................................................... 10

3.1 .2 Principle ................................................................................................. 10

3.1 .3 Structur .................................................................................................. 10

INTERNATIONAL MACHIINE CONCEPTS

3.2 Main components ...................................................................................... 11

3.3 Parameter ................................................................................................... 12

4 Operation procedure and adjustment ............................................................. 12

4.1 Procedure flow ........................................................................................... 12

4.2 Check the sensor is well. ........................................................................... 13

4.3 Adjustment of the labeling machine ......................................................... 13

4.4 Stripper parallelism adjustment ................................................................ 13

4.5 Adjustment of bottle space and correct device ......................................... 15

5 Attentions ......................................................................................................... 15

6 Common faults analyses ................................................................................. 16

7 Maintenance .................................................................................................... 17

8 Appendix .......................................................................................................... 17

8.1 Optical fiber sensor specification (See appendix 1) ............................... 17

8.2Sketch map chart (See appendix 2) ........................................................... 17

8.3 Electrical principle chart (See appendix 3) .............................................. 17

9 Packaging lists and After-sale service ............................................................ 18

INTERNATIONAL MACHIINE CONCEPTS

9.1 packaging list ............................................................................................. 18

9.2 Product certificate ..................................................................................... 19

9.3 Warranty Card ........................................................................................... 19

9.3.1 From date of sale, the warranty as follow: ......................................... 19

9.3.2 Check the machine model and machine no. ...................................... 20

9.3.3 Safe-keeping the invoice and warranty card ...................................... 20

INTERNATIONAL MACHIINE CONCEPTS

1 Introduction

This machine adopts DELTA-DVP14SS11T2 (Delta) as the core control part for good

working: reasonable electrical design and human-computer software design, providing

high performance and easy operation.

1.1System component：

Human-computer interface

Programmable Logic Controller (PLC): DELTA-DVP14SS11T2 (Delta)

Optical fiber sensors: Keyence (Japan)

1.2 System parameter:

Environment: Temperature 5℃-50℃ Humidity 20%-90%

Power supply: Input AC 220V±10% (50Hz) Output DC 24V±2V

PLC: Input AC 220V 8 Transistors Output DC no contact 6 Transistors

1.3 Human-computer interface:

1.3.1 Human-computer interface: 5.7＂FSTNLCD Touch screen

INTERNATIONAL MACHIINE CONCEPTS

1.3.2 Operation system start:

Step1 Link the machine to power supply 220V.

Step2 Put the Emergency Stop Button in the normal position. (When the machine is

INTERNATIONAL MACHIINE CONCEPTS

out of work, it can cut off the power immediately by pressing this button.)

Step3 The machine will enter into [Boot Screen] 2 s latter.

1.3.3 Boot screen:

1.3.4 Operation running interface:

Entering this interface, you can process as follows:

[ON]: Pressing [ON], machine will start to label; pressing [OFF],

machine stops working.

[Front label test]: Pressing [Front label test], the machine enters testing state.

Each pressing, each label feeds. The feeding label quantities

do not count.

[Back label test]: The same as [Front label test]. Pressing [Back label test],

the machine enters testing state. Each pressing, each label