Imbera 5341211 Series, 6361112 Series, 6071112 Series, VR10, G319 How-to Manual
...
HOW TO CHANGE THE DOOR OPENING DIRECTION?
This instructive applies for the series from:
G319 series 5341211XXXXX
VR10 series 6071112XXXXX
VR12 series 6361112XXXXX
1. Remove the front
grill.
2. Disconnect the
red and black wires
that come out of
the door.
1
2
RI-13-008 CHANGE THE DOOR OPENING DIRECTION _R0
5. Remove door from the
cooler and remove the
screws to take out the
bushing that is inside the
door frame.
5
3. Using a set of
pliers remove the
safety pin from the
selfclosing
cartridge.
4. Unscrew the 3 hex
head screws and
remove these, the
same with the star
washers.
3
4
6-7. Repeat the same operation by unscrewing and
remove the self-closing cartridge.
Switch plastic bushing to self-closing side and vice
versa.
8. Remove the top cap.
9. On the bottom insert the wires into the door
frame.
6
7
10
HOW TO CHANGE THE DOOR OPENING DIRECTION?
10.
Then
place
the
cap
into
cover
the
hole
.
8
9
11
12
11. On self-closing side pull out the harness through
the hole.
12. Locate square washer on the closing mechanism of
the door and with the help of a 5/16” open
wrench, spin the washer 90º direction until the
mechanism locks.
RI-13-008 CHANGE THE DOOR OPENING DIRECTION _R0
Loading...