Imaxrc X200AC-DC User Manual
X200 AC/DC
Manual
New Charger X200AC/DC Released
AC Function
DC Function
Touch Screen Operation
4.3 inch touch screen make the operation more convenient
4.3 inch display screen
4.3 inch TFT display screen, WQVGA(480*272),65 thousand
resolution
iM·OS V2.15
A whole new OS system for X200AC/DC professional charger
with high efficiency
USB Port
Output 5V 2.1V USB port specially design for iPhone and
smartphone charging.
32 bit processor
High precision core 32-bit ARM processor for smoother
operation
Multiple languages customization
iM·OS System
Type
X200AC/DC
support more
than 6 type
batteries LiPo
/ Lilon / LiFe
/ NiMh / NiCd
/ Pb
Type
Load
Loading
Common
Use Battery
Setting
Load
Current
Input / Output
Current
Charge
0.1-10A
Discharge
0.1-3A
Current
Save
Save
Common
Use Battery
Setting
Save
Cells
LiXX 1-6S
NiXX 1-16S
Pb 1-10S
Cells
Uset
Advanced
application
Settings
Uset
Mode
Fast Charge
Balance charge
Charge
Discharge
Circulating
charge/discharge
Mode
Start
Charging/
Discharging
Start
iM·OS System
LiPo
Lipo Battery,Single Nominal Voltage: 3.7V,Charge cut-
off voltage 4.2V,Discharge cut-off voltage 3.0V
LiIon
LiIon Battery,Single Nominal Voltage: 3.6V,Charge
cut-off voltage 4.1V,Discharge cut-off voltage 2.5V
LiFe
LiFe Battery,Single Nominal Voltage: 3.3V,Charge cut-
off voltage 3.6ischarge cut-off voltage 20.V
NiMH
NiMH Battery,Single Nominal Voltage: 1.2V,Charge
cut-off voltage 1.5V,Discharge cut-off voltage 1.0V
NiCd
NiCd Battery,Single Nominal Voltage: 1.2V,Charge cut-
off voltage 1.5V,Discharge cut-off voltage 0.85V
Pb
Pb Battery,Single Nominal Voltage: 2.0V,Charge cut-off
voltage 2.5V,Discharge cut-off voltage1.72V
Balance
Lipo balance charge use CC-CV charging way. The charger
will balance the battery voltage when charging, this only for LiPo
battery. Please connecting the balance port when charging and
discharging. Support 2-6 cells.
Charge
Use CC-CV charging way. On the basis of Users setting
current the charger will charge the battery to the cut-off
voltage. Warning: The voltage can not balance even connecting the balance port when using LiPo battery.
FastCharge
FastCharge. Almost same as the Charge Mode. The only
difference is the current only 1/5 and the other setting
only 1/10 of the setting current when finished charging.
Warning: The voltage can not balance even connecting
the balance port when using LiPo battery.
Storage
Charging and discharging the battery voltage to a certain
numerical for easy storage. This function only for LiPo
battery which need connecting the balance port. Support
2-6S.
DisCharge
Use CC-CV charging way. On the basis of Users setting
current the charger will discharge the battery to the cutoff voltage. Warning: Please connecting to the Balance
port when use LiPo battery.
Checker
Measuring Mode. The charger only collect battery
primary port and balance port voltage,but can not charge
and discharge.
Manual Charge
This function only for NiMH battery which same as The
Charge mode.
Cycle
This function only for NiMH battery. On the basis of
Users setting current for MiNH battery cycle charging and
discharging.The Cycle times is 1-6.
X200AC/DC Fundamental Function
Output Power Ports Balance Ports PC Upgrade PortUSB Port
X200AC/DC is a professional RC model battery charger,please view
the manual before using. If you are a fresh man please read this entire
operating manual completely before using.
【Warning: 】The warning of charger operation and disclaimer,
Please read and abide by the following terms before operation.
1. This is a sophisticated hobby product. The person who operates the
charger should be professional who master professional knowledge
about chargers.
2. Make sure the battery variety you using meets charger require-
ment. Any kinds of damaged, aged and surface, damaged batteries
are prohibited. Besides, choose the suitable charging program or the
charger and the battery will get damaged.
3. Considering of uneven physical property and various batteries
never leave the working charger exhausting, leaking or inflating,
immediately disconnect the battery and store it in a safe ocation, away
from people and inflammable materials.
5. iMaxRC will not be responsible for any personal injuries and fire
disaster caused by incorrect operation.
I have read this agreement carefully and give up all legal.
Connecting X200AC/DC
Please follow the below steps connecting:
1: Please connect the AC power cord with X200AC/DC charger
and then plug adapter of power cord into socket.
AC input connection DC input connection
2: Connect battery correctly with X200AC/DC. If LiPo battery,
pls also connect balance adapter of battery with balance port
of X200AC/DC
LiPo battery connection
【NOTE】 USB support 5V 2.1A charging voltage,and also use for iPad
/ iPod / iPhone / HTC and other intelligent electronic equipment. Both the
USB and battery get charged simultaneously.
NIMH battery connection
4: Sarting X200AC/DC
startup X200AC/DC to enter the main interface ( Image 1 ).
V2.15
Image 1
Showing“Warning and Disclaimer” 2 seconds and will know the
copyright and security information ( Image 2 ). It will be enter into the
contacting interface if you can not agree with the disclaimer, and then
you could contact the distributor return the charger ( Image 3 )
5、 is issued involving Nasdaq delayed by copyright and other issues, of the
speed within two weeks, call or letter from western China to op en the Portal
contact.
I have carefully read the agreement, and give u p all legal clai ms arising
because of the charger caused.
To give up and return To confirm and begin using
Image 2
Image 3
【NOTE】 Please read Disclaimer before doing anything.
6: Enter into main interface after accepting( Image 4 ). Start to
charge and discharge according to the different battery.
Information Bar
Image 4
【NOTE】 Information bar can not get touched.
Action Bar
Example 1:Choose a set of LiPo battery charging,please
follow the below steps:
Step 1: Touch Type( Image 5 ) Enter into the “Type interface”, and
then Touch :LiPo ( Image 6 ) will Enter into main interface go on the
next step.
Image 5
Image 6
Loading...