Imaxrc X100 User Manual

X100 AC/DC

Manual

New Charger X100 Released

www.imaxrc.com/X100.html

AC Function

DC Function

Touch Screen Operation

3.0 inch touch screen make the operation more convenient

3.0 inch display screen

3.0 inch TFT display screen, WQVGA(400*240),65 thousand
resolution

iM·OS V2.15

A whole new OS system for X100 professional charger with
high efficiency

USB Port

Output 5V 2.1V USB port specially design for iPhone and
smartphone charging.

32 bit processor

High precision core 32-bit ARM processor for smoother
operation

Multiple languages customization

iM·OS System

www.imaxrc.com/X100.html

Type

X100 support
more than 6
type batteries
LiPo / Lilon /
LiFe / NiMh /
NiCd / Pb

Type

Load

Loading
Common
Use Battery
Setting

Load

Current

Input / Output
Current
Charge

0.1-8A
Discharge

0.1-3A

Current

Save

Save
Common
Use Battery
Setting

Save

Cells

LiXX 1-6S
NiXX 1-16S
Pb 1-10S

Cells

Uset

Advanced
application
Settings

Uset

Mode

Fast Charge
Balance charge
Charge
Discharge
Circulating
charge/discharge

Mode

Start

Charging/
Discharg­ing

Start

iM·OS System

www.imaxrc.com/X100.html

LiPo

Lipo Battery,Single Nominal Voltage: 3.7V,Charge cut-

off voltage 4.2V,Discharge cut-off voltage 3.0V

LiIon

LiIon Battery,Single Nominal Voltage: 3.6V,Charge

cut-off voltage 4.1V,Discharge cut-off voltage 2.5V

LiFe

LiFe Battery,Single Nominal Voltage: 3.3V,Charge cut-

off voltage 3.6ischarge cut-off voltage 20.V

NiMH

NiMH Battery,Single Nominal Voltage: 1.2V,Charge

cut-off voltage 1.5V,Discharge cut-off voltage 1.0V

NiCd

NiCd Battery,Single Nominal Voltage: 1.2V,Charge cut-

off voltage 1.5V,Discharge cut-off voltage 0.85V

Pb

Pb Battery,Single Nominal Voltage: 2.0V,Charge cut-off

voltage 2.5V,Discharge cut-off voltage1.72V

Balance

Lipo balance charge use CC-CV charging way. The charger
will balance the battery voltage when charging, this only for LiPo
battery. Please connecting the balance port when charging and
discharging. Support 2-6 cells.

Charge

Use CC-CV charging way. On the basis of Users setting
current the charger will charge the battery to the cut-off
voltage. Warning: The voltage can not balance even con­necting the balance port when using LiPo battery.

FastCharge

FastCharge. Almost same as the Charge Mode. The only
difference is the current only 1/5 and the other setting
only 1/10 of the setting current when finished charging.
Warning: The voltage can not balance even connecting
the balance port when using LiPo battery.

Storage

Charging and discharging the battery voltage to a certain
numerical for easy storage. This function only for LiPo
battery which need connecting the balance port. Support
2-6S.

DisCharge

Use CC-CV charging way. On the basis of Users setting
current the charger will discharge the battery to the cut­off voltage. Warning: Please connecting to the Balance
port when use LiPo battery.

Checker

Measuring Mode. The charger only collect battery
primary port and balance port voltage,but can not charge
and discharge.

Manual Charge

This function only for NiMH battery which same as The
Charge mode.

Cycle

This function only for NiMH battery. On the basis of
Users setting current for MiNH battery cycle charging and
discharging.The Cycle times is 1-6.

X100 Fundamental Function

www.imaxrc.com/X100.html

Output Power Ports

JST-XH Balance Ports

PC Link Port

USB Port

X100 is a professional RC model battery charger,please view the

manual before using. If you are a fresh man please read this entire

operating manual completely before using.

【Warning: 】The warning of charger operation and disclaimer,

Please read and abide by the following terms before operation.

1. This is a sophisticated hobby product. The person who operates the

charger should be professional who master professional knowledge

about chargers.

2. Make sure the battery variety you using meets charger require-

ment. Any kinds of damaged, aged and surface, damaged batteries

are prohibited. Besides, choose the suitable charging program or the

charger and the battery will get damaged.

3. Considering of uneven physical property and various batteries

never leave the working charger exhausting, leaking or inflating,

immediately disconnect the battery and store it in a safe ocation, away

from people and inflammable materials.

5. iMaxRC will not be responsible for any personal injuries and fire

disaster caused by incorrect operation.

I have read this agreement carefully and give up all legal.

Connecting X100

Please follow the below steps connecting:

1: Please connect the AC power cord with X100 charger, and

then plug adapter of power cord into socket.

2: Connect battery correctly with X100. If LiPo battery, pls

also connect balance adapter of battery with balance port of

X100.

【NOTE】 USB support 5V 2.1A charging voltage,and also use for iPad

/ iPod / iPhone / HTC and other intelligent electronic equipment. Both the
USB and battery get charged simultaneously.

4: Sarting X100

startup X100 to enter the main interface ( Image 1 ).

V2.15

Image 1

Showing“Warning and Disclaimer” 2 seconds and will know the

copyright and security information ( Image 2 ). It will be enter into the

contacting interface if you can not agree with the disclaimer, and then

you could contact the distributor return the charger ( Image 3 )

5、 is issued involving Nasdaq delayed by copyright and other issues, of the
speed within two weeks, call or letter from western China to op en the Portal
contact.

I have carefully read the agreement, and give u p all legal clai ms arising
because of the charger caused.

To give up and return To confirm and begin using

Image 2

Image 3

【NOTE】 Please read Disclaimer before doing anything.

6: Enter into main interface after accepting( Image 4 ). Start to

charge and discharge according to the different battery.

Information Bar

Image 4

【NOTE】 Information bar can not get touched.

Action Bar

Example 1:Choose a set of LiPo battery charging,please

follow the below steps:

Step 1: Touch Type( Image 5 ) Enter into the “Type interface”, and

then Touch :LiPo ( Image 6 ) will Enter into main interface go on the

next step.

Image 5

Image 6

Step 2: Touch ‘Mode’ icon( Image 7 ) to enter into Mode interface.

Please choose battery charge mode ( Image 8 ) and go back to main

interface to continue setting.

Image 7

Image 8

【Note】 There are six charge/discharge modes in Mode interface(

Image 8 ), see iM.OS System function for further details. please set

charge/discharge mode according to your requirement. Image 7 is

showing Balance charge mode.

Step 3: Touch Cells icon ( Image 9 ) to enter into Cells interface.

Please set battery packs by sliding ( Image 10 ). Touch OK to go back

to main interface and continue setting.

Image 9

Image 10

【Note】Please set according to suitable battery packs.

Step 4: Touch Current icon ( Image 11 ) to enter into Current inter-

face. Please set charge current by sliding ( Image 12 ). Touch OK to

go back to main interface and continue setting.

Image 11

Image 12

【NOTE】 Set charge current in charge mode and discharge

current in discharge mode.

Step 5: If you often use the same battery, please touch Save icon (

Image 13 ) to enter into Save interface. Touch Unused icon to save

the data and it will be easy for you to charge next time. ( Image 14 )

Image 13

Image 14

【NOTE】You could use this function after you have set Type/

Mode/Cells and Current correctly.

Step 6: You could load your previous data according to X100’s

load function. Touch Load icon ( Image 15 ) to enter into Load inter-

face. Choose the data you want to load ( Image 16 ).

Image 15

Image 16

Step 7: Touch Start icon ( Image 17 ) to enter into Start interface.

The system will check battery status automatically. If everything is

OK, the charger will begin to charge.( Image 18 )

Image 17

Image 18

【NOTE】The charger will pop-up window when the battery is fully

charged. Touch OK to finish charging process ( Image 19 ).

Image 19

【NOTE】 The charger will send out an alert and pop-up window if

the battery packs’ setting is incorrect (Image 20).

Image 20

Example 2: If you want to charge a pack of NiMh battery,

please execute the operation as follows:

Step 1: Touch Type icon ( Image 21 ) to enter into Type interface.

Touch NiMh icon to go back to main interface and continue setting

( Image 22 ).

Image 21

Image 22

Step 2: Touch Mode icon ( Image 23 ) to enter into Mode interface.

Touch Charge icon ( Image 24 ) to go back to main interface and

continue setting.

Image 23

Image 24

【NOTE】 There are four charge/discharge modes in Mode in-

terface( Image 24 ), see iM.OS System function for further details.
please set charge/discharge mode according to your requirement.
Image 23 is showing charge mode.

Step 3: Touch Cells icon to enter into Cells interface. Please set

NiMh battery packs by sliding ( Image 25). Touch OK to go back to

main interface and continue setting ( Image 26).

Image 25

Image 26

【NOTE】The battery cannot be charged if each pack of the

battery voltage is less than 0.7V, please use the less battery packs
to activate charging process. If you need lower voltage during dis­charging process, please use the less battery packs to discharge.

Step 4: Touch Current icon ( Image 27 ) to enter into Current

interface. Please set charge current by sliding ( Image 28 ). Touch

OK to go back to main interface and continue setting.

Image 27

Image 28

【NOTE】Please set charge current in charge mode and dis-

charge current in discharge mode. As for Save and Load func-

tions, please see Step5 and 6 in Example1 for further details.

Step 5: Touch Start icon ( Image 29 ) to enter into Start interface.

The charger will check battery status automatically. If everything is

OK, the charger will begin to charge ( Image 30 ).

Image 29

Image 30

【NOTE】The charger will pop-up window when the battery is

fully charged. Touch OK to finish charging process ( Image 31 ).

Image 31

【NOTE】The charger will send out an alert and pop-up window

if the battery packs’ setting is incorrect. ( Image 32 ) All Lipo

battery packs setting are the same operation.

Image 32

Example 3: If you want to charge a pack of Pb battery, please

execute the operation as follows,

Step 1: Touch Type icon ( Image 33 ) to enter into Type interface.

Touch Pb icon ( Image 34) to go back to main interface and

continue setting.

Present

Battery Type:

Mode:

Balance

Cells:

2Cells 7.4V

Current:

C 2.0A D 1.0A

Setting

LiPo

Type Cells

Mode

Load Save Uset Shart

Current

Image 33

Image 34

Step 2: Touch Mode icon ( Image 34 ) to enter into Mode inter-

face. Touch Charge icon ( Image 35 ) to go back to main interface

and continue setting.

Image 34

Image 35

【NOTE】 There are some options in Mode interface ( Image

35 ). Please set according to your requirement. Image 30 is

showing charge process.

Step 3: Touch Cells icon ( Image 36 ) to enter into Cells inter-

face. Please set Pb battery packs by sliding ( Image 37 ). Touch

OK to go back to main interface and continue setting.

Image 36

Image 37

【NOTE】Pleasr set according to suitable battery packs.

Step 4: Touch Current icon ( Image 38 ) to enter into Current in-

terface. Please set charge current by sliding ( Image 39 ). Touch

OK to go back to main interface and continue setting.

Image 38

Image 39

【NOTE】Set charge current in charge mode and discharge

current in discharge mode. As for Save and Load functions,

please see Step 5 and 6 in Example1 for further details.

Step 5: Touch Start icon ( Image 40 ) to enter into Start interface.

The charger will check battery status automatically. If everything

is OK, the charger will begin to charge. ( Image 41 )

Image 40

Image 41

【NOTE】The charger will pop-up window when the battery is

fully charged. Touch OK to finish charging process ( Image 42 ).

Image 42

【NOTE】The charger will send out an alert and pop-up window

if the battery packs’ setting is incorrect. ( Image 43 ) All Lipo

battery packs setting are the same operation.

Image 43

iM·OS SYSTEM ADVANCED APPLICATION

iM·OS SYSTEM is brand-new software of charger which was
Independently research and develop by iMaxRC. It is the first
operation system in the world especially to support touch screen
charger,and it’s going to be Industry standard for touch screen
charger series.

Here we will full display the Advanced application Settings for you.
Pls touch Uset ( Image 44 ) to enter into advanced application
setting interface.( Image 45 )

Image 44

Cut off Low:

11.0V

Cut off temperaturey:

Battery 60℃

Cut off capacity:

5.0 Ah

Cut off Time:

120 Minute

Lixx Check Time:

10 Minute

Cut off

Cut off

Cut off

Low

tempe-

Input

raturey

Lixx

Nixx

Check

Delta

Time

Peak

Backlight

Buzzer Language

Level

More

Capacity

Wasle

Time

Cut off

Time

Cycle
Times

Back

Image 45

Touch “Cut off Low Input”( Image 46 ), the information bar on left

will skip into setting menu( Image 47 ), touch “OK” after setting

done, it will turn back to interface ( Image 47 ), then you can go on

with setting of other features.

Cut off Low:

11.0V

Cut off temperaturey:

Battery 60℃

Cut off capacity:

5.0 Ah

Cut off Time:

120 Minute

Lixx Check Time:

10 Minute

Cut off

Cut off
Low
Input

Lixx

Check

Time

Backlight

Level

More

Cut off

tempe-

Capacity

raturey

Nixx

Wasle

Delta

Time

Peak

Buzzer Language

Image 46

10.7 V
Cut off

Cut off
Low
Input

Lixx

Check

Time

Backlight

Level

OK

Cut off

tempe-

Capacity

raturey

Nixx

Wasle

Delta

Time

Peak

Buzzer Language

Image 47

Please find detailed list of features on next page.

Cut off

Time

Cycle
Times

Cut off

Time

Cycle
Times

Back

Back

Cut off Low Input

Cut off

Low

Range of setting:10-24V. Lowest cut off input voltage,

Input

charger will stop charging/discharging when input voltage
is lower than setting value.

Cut off Temperature

Cut off
tempe-

Range of setting: 40-80°C. Cut off Temperature, char-

raturey

ger will stop charging/discharging when temp of batteries
is lower than setting value.

Cut off Capacity

Cut off

Range of setting: 0.1Ah-10Ah. Safety capacity. Charger

Capacity

will Stop charging/discharging when capacity of batteries
is higher than setting value.

Cut off Time

Cut off

Time

Range of setting: 10-200mins. Safety time, charger will
stop charging/discharging, when charging/discharging
time is less that setting value.

LixxCheckTime

Lixx

Check

Range of setting: 5-60mins. Time for checking cells

Time

count of LiPo battery pack.

NixxDeltaPeak

Nixx
Delta
Peak

Range of setting: 5-200mV. NiHm/NiCd Delta peak.

Waste Time

Wasle
Time

Spacing interval between 2 Cycles. Range of setting:
1-60mins.

Cycle Time

Cycle
Times

Range of setting: 1-6 times.

Backlight Level

Backlight

Level

Range of setting: 1-10, Brightness level.

Buzzer

Buzzer

Range of setting: All sounds open, only touch tone

closed, All sounds closed.

Language

Language

Language option. Now provisionally only support English

interface.

Back

Back

Turn back to main interface

【IMPORTANT NOTICE】 X100 charger have 3 parameters to

control rotate speed of fan.

1. when temperature of working charger reach 40℃, fan speed

will be one level up as temp rise by each 2℃

2. when charging power reach 100W, fan speed will be one level

up as charging power rise by each 5W.

3. Fan speed will be one level up as discharging power rise by

each 2W.

NOTE: Fan Speed of X100 charger will begin to change in

any of above situation.

Please follow the instruction to operate your X100 charger, to

insure safety of you and charger, and use it easily. Please keep

manual within easy reach, to be easy reference for you and other

user.

【NOTE】 Procedures, which if not properly followed, can

result in potential nullification of any vendor warranties or

liabilities.

SAFETY PRECAUTIONS AND WARNINGS

【Warning】Procedures, which if not properly followed, create

the probability of property damage, collateral damage, and

serious injury OR create a high probability of superficial injury.

IMAXRC will not be held directly responsible for those damage

if they were caused by improper using of user.

Proper Operation Pls put X100 charger on flat operating

platform. DO NOT insert any object into air-vent.

Water and Humid Place Please keep charger far away from

any place wet or moist, such as bathroom, hand Sink. Keep

charger in desiccative place to avoid damage caused by rainy

weather.

Charger PLEASE make sure you are holding plug, not pull cord

when disconnect power supply. To avoid mechanical damage.

NEVER use X100 charger under following operating environ-

ment: the environment full of floating dust, smoke from burning or

cooking in air. the place have ultrasonic humidifier (for unfiltered

tap water) working on. In rare cases, these smoke or particles in

air may float into X100 charger from air-vent. This may lead inner

surface of screen appear mist.

Do not Maintain Yourself

X100 charger not include any spare part for user to make the

maintenance , never dismantle the product by yourselves. Please

contact with IMAXRC authorized distributor for maintenance.

Please note if you dismantle the product by yourselves, this may

cause damage of original device. Such kind of damage is not

responsible part of our guarantee.

iMaxRC co.,LTD

·Add: F4 201-205, F518 IDEALAND Baoyuan Road, Baoan,

Shenzhen, P.R.C

·Tel: [phone]

·Fax: [phone]

·Web: www.imaxrc.com

All specifications and figures are subject to change
without notice. Printed in China © 2013