2.5” M-CLASS
SSD UPGRADE KIT
Install in 1-2-3!
NEXT-GENERATION UPGRADE KIT
Imation’s 2.5” M-Class solid state drives (SSD) will change the way you look at
computing. Backed by a 5-year limited warranty - industry leading for MLCbased products - Imation’s M-Class SSD features 48bit/2KB Error Correction
Code (ECC), which increases product reliability and longevity. Lightning fast
boot times, loading applications in an instant, the power to run graphics,
design applications and games the way they were meant to run are all possible
with Imation’s M-Class SSDs.
Upgrading your system to this lightning fast, Imation M-Class SSD has never
been simpler. Imation’s M-Class SSD with upgrade kit provides an all-in-one
solution for upgrading an existing system without losing your current operating
system, applications or data. After completing the upgrade, the kit allows you
to convert your old hard drive into an external USB hard drive - expanding your
storage capacity.
INSTALL 1, 2, 3
COPY - Transfer existing files
from an HDD to the new SSD
using Acronis® True Image
HD™ drive imaging software
without losing your current
operating system applications
or data.
SWAP - Install the new SSD
into the laptop and place the
HDD into the external drive
enclosure.
CONVERT - Repurpose the
existing hard drive into
an external USB drive for
CONVERT
additional backup and
storage.
TECHNICAL SPECS
CAPACITIES (Native): 64GB and 128GB
INTERFACE: Case: USB 2.0
SSD: SATA II – 3Gbps and 1.5Gbps
TRANSMISSION MODES: PIO mode (0-4), DMA
mode (0-2), Ultra DMA mode (0-6)
OPERATING TEMPERATURE: 0-70°C (32-158°)
CASE FINISH: Burnished Carbon
SEQUENTIAL READ/WRITE: Read: 230MB/s*
Write: 170MB/s*
SEQUENTIAL READ/WRITE IOPS: Read: 22,000,
Write: 6,500
MTBF: 1,000,000 hours
CACHE: 64MB
ECC: 48 bit ECC per 2KB data
5 YEAR LIMITED WARRANTY
Primary
ORDERING UPC
27515
27516
* M-class sequential specs based on the ATTO benchmark tool, speeds may vary dependent on the benchmark tool and file size along with system drivers,
bios version and windows version.
© Imation Corp Imation Enterprises Corp 1 Imation Way Oakdale, MN 55128-3414 Ph: 651.704.4000 Fax: 651.537.4675 www.imation.com
Imation and the Imation logo are trademarks of Imation Corp. All other trademarks are the property of their respective owners. 52-0003-8614-5 (4/10)
DESCRIPTION
2.5” M-Class SATA II
64GB + Upgrade Kit
2.5” M-Class SATA II
128GB + Upgrade Kit
UPC
051122275159
051122275166
SIZE (LxWxH)
8.2” x 5.2” x 2.3”
8.2” x 5.2” x 2.3”
WEIGHT
1.06lbs
1.06lbs
Master Carton
UPC
50051122275154
50051122275161
SIZE (LxWxH)
10.7” x 8.9” x 6.0”
10.7” x 8.9” x 6.0”
WEIGHT
5.13lbs
5.13lbs
UNITS
4
4