Imation Disc Stakka Setup Manual

Imation Disc Stakka

Setup Guide

Installing your Disc Stakka

Requirements

• Pentium II or G3 processor (minimum)

• Microsoft XP, 2000 (SP4), 98SE, ME or Mac OS X (v10.1 or higher)

• 32 MB RAM (minimum), 64 MB RAM (recommended)

• 200 MB free disc space

• USB 1.1 or 2.0 compliant port

• CD or DVD drive for capturing disc content

• Microsoft Internet Explorer 5.01 or higher (for Windows only)

Check you have all of the box contents

In addition to this Setup Guide, you should have a Disc Stakka unit, OpdiTracker software disc and USB cable.

Install the OpdiTracker software

Insert the disc into your computer’s CD or DVD drive.

If the installer does not start automatically,

1. Navigate to the disc in Explorer (Win) or

double-click the OpdiTracker disc on your
desktop (Mac).

2. Double-click Setup (Win) or OpdiTracker

Installer (Mac), and then follow the on­screen instructions.

Connect the Disc Stakka to your computer’s USB port

Check the installation

The installation is successful when the indicator light (LED) on the front of the
Disc Stakka stays lit and the OpdiTracker icon appears in the Windows taskbar
or Mac OS X Dock.

Stack up to five units to create a tower

Ensure the top unit sits flat on the bottom unit. The locators on the top and bottom of the units must engage.
Do not connect extra cables—use only one cable for one tower of Disc Stakkas.

Connect multiple towers to a powered USB hub

Connect the powered USB hub to your computer’s USB port