DEFENDER™ F200+BIO
USER GUIDE
Contents
Introducing Defender™ F200+Bio 2
Minimum System Requirements 2
Imation Documentation 2
Getting Started 4
Opening and closing a device 4
Attaching the lanyard loop 4
Personalizing a device 6
Accessing data on the device 8
Logging into and out of the device 8
Saving and opening files 9
Disconnecting the device 9
Troubleshooting 10
Warranty Information 12
INTRODUCING
DEFENDER™ F200+BIO
Defender™ F200+Bio is a USB (Universal Serial Bus) portable flash drive with built-in biometric security and
data encryption.
Figure 1-1: Defender F200+Bio
This guide is designed to help you set up your Defender F200+Bio device with minimal effort.
MINIMUM SYSTEM REQUIREMENTS
Defender F200+Bio comes with built-in Imation Defender ACCESS Standard™ software on its application
partition. The following list describes the requirements you need to use your device with ACCESS Standard.
•A USB port (Type A)
• An operating system that supports USB 2.0 or 1.1 Mass Storage Devices
Operating systems
•Microsoft Windows 7
•Windows XP Pro SP2
•Windows XP Pro SP3
• Windows XP Home SP3
• Windows Vista (Home, Business and Enterprise editions SP2)
• Mac OS X 10.5 and 10.6
IMATION DOCUMENTATION
You can find detailed instructions about using and managing Defender F200+Bio in the ACCESS Standard
User Guide.
Topics include:
• Information about Imation Defender Collection Devices
• Personalizing the device
• Accessing the device
•Managing users
2
INTRODUCING
DEFENDER™ F200+BIO
• Managing devices
• Protecting the device from viruses
• Troubleshooting
Online Help is also available with ACCESS Standard software.
To view the ACCESS Standard User Guide
• From the root directory of the application partition, double-click the UserGuide.pdf file.
Note: You need Adobe® Reader® (http://www.adobe.com/acrobat) to view the documentation.
To view online Help
• When ACCESS Standard is open, click Help on the page for which you want more information.
cont.
3
GETTING STARTED
OPENING AND CLOSING A DEVICE
Defender™ F200+Bio has an integral case that
opens by removing a large front cap. .
To o p en a dev i ce
• Grasp the front and rear caps and pull apart.
To c l os e a d e v ice
• Slide the device into the front cap and squeeze
the caps together.
ATTACHING THE LANYARD LOOP
Defender F100 and Defender F150 come with a lanyard loop that allows you to attach it to lanyards or
other objects.
To attach the lanyard loop (optional)
1. Insert the small threaded end of the lanyard
through the hole in the main part of the device.
4