Imalent MS12 Quick Start Manual

Product Introduction

1.MS12, “Light of the king”,utilizes12 pieces of American CREE XHP70 LEDs with a

maximum output up to 53000LM and long throw up to 913 meters, MS12 will bring you

absolute shock in the night.

2.MS12 is extremely compact and comfortable to hold, and utilizes 6 side lights for camping,

fishing and more other outdoor lighting experience!

3.Built in high power cooling fan,silent,waterproof,heavy wind , which is a perfect combination of

great energy and technology.

4.With IMALENT’s unique design with bright plating process optical reflector and 12pcs CREE

XHP70 LEDs,the MS12 delivers a maximum output up to 53000 lumens and a far reaching

distance of 913 meters, push you boundaries day and lights, make it a perfect search and rescue

flashlight!

5.The MS12 features IMALENT’s signature high-grade side pressure switch. This ergonomic

design provides an unprecedented level of grip. Eight output levels ensure long

runtimes with low or high output in any situation. The “hide strobe” feature keeps you safe

by starting quickly at critical moments.

Product feature

Utilizes12pieces of American CREE XHP 70 LEDs,with a lifespan of up to 50000 hours

and a maximum output of 53000 lumens.

Built-in safety self testing intelligent charging circuit, convenient,fast and safe.

Eight levels which can be exchanged quickly and instant Turbo.

Six battery capacity indicators around the flashlight head, shows the capacity any

time.

Size: 258mm (length)*129.5 mm (head diameter) *55.5mm (body diameter)

Net weight:1740g(battery included)

High efficiency constant current circuit will maintain constant brightness

Built-in thermal control module will automatically adjust the brightness output,

keep using comfortably.

Combination of toughened ultra-clear mineral and anti-reflective coating glass

Aluminum OP reflector

Aerospace-grade aluminum alloy body, wear-resistant Type III hard-anodized

surface treatment

IPX-8 standard waterproof (2 meters submersible)

1.Switch on/off

Press the power switch button one time to turn on and one more time to off the

flashlight.

2.Normal lighting mode

When the flashlight is on, press and hold the power switch button, it will cycle

from 300lm-900lm-1900lm-3800lm-7500lm-15000lm-30000lm,release the power

switch button will save the needed output level.

3.Turbo and Strobe

Double press the power switch button at any mode , will activate turbo output,

which is up to 53000 lumens, double press the power switch button again will

activate strobe, slightly press the power switch button to exit.

4. Side lights mode

With the flashlight off, press and hold the switch button for one second to turn on the side

lights.With the side lights on, slightly press the button to change output levels,

high-medium-low. Press and hold it for one second again to quit side lights mode.

5. Low battery warning

With the flashlight on,when the battery voltage is lower than 11.8V,the red indicator

will turn on. When the battery voltage is lower than 11V,the red indicator will flash

constantly to remind users to replace the battery or charge it.

6.Intelligent thermal control

While using the high output mode, the flashlight will generate a lot of heat. When

the flashlight body internal temperature reaches 55 degrees Celsius, it will

automatically reduce the brightness to 15000lm in order to ensure

safe,

comfortable use and prevent discomfort from overheating.

7.Memory function

The flashlight will remember the brightness that it was previously set at. When you turn the

flashlight on again, it remembers how bright it was before being turned off. (Special modes

without memory)

8.Lock and unlock

With the flashlight off, press the switch button 3times, the red indicator will flash

twice to indicate the flashlight is locked. Press the switch button 3 times again,the

green indicator will flash twice to indicate it unlocked,and can work normally.

Built-in Cooling Fan

1. When the MS12 is in high output mode, the cooling fan automatically turns on

once the flashlights body reaches 55 degrees C.

2. With the flashlight off, quickly press the switch button 4 times to activate the

cooling fan in order to cool off the flashlight.

3. When under 15,000 lumens of output, the cooling fan will not turn on.

9. Charging

The product comes with intelligent charging function.Plug in one of the adapters as the picture

shows into an electrical outlet(24V/2A),and plug in the other adapter into the indoor socket. It will

take about 4 hours 38mins to fully charge

As shown in Picture 1, the contact points of the positive and negative poles of the flashlight body

are all in the same plane, and the plane must not be inverted on the conductor, otherwise the

circuit board will be short-circuited.

Maintenance

Every 6 months, the inner threads should be wiped with a clean cloth followed by a thin coating of

silicon-based lubricant.