Imagine communications OP+OER+S, OP+OER+HI+S, OP+OER+SF+D, OP+OER+SF+HI+D Installation And Operation Manual
Delivering the Moment
Installaon and Operaon Manual
OP+OER+S, OP+OER+HI+S,
OP+OER+SF+D and
OP+OER+SF+HI+D
3 Gb/s HD-SDI Opcal-to-Electrical
Receivers
Edion B
175-100080-00
Publicaon Informaon
© 2014 Imagine Communicaons Corp. Proprietary and Condenal.
Imagine Communicaons considers this document and its contents to be proprietary and condenal. Except for
making a reasonable number of copies for your own internal use, you may not reproduce this publicaon, or any part
thereof, in any form, by any method, for any purpose, or in any language other than English without the wrien consent
of Imagine Communicaons. All others uses are illegal.
This publicaon is designed to assist in the use of the product as it exists on the date of publicaon of this manual, and
may not reect the product at the current me or an unknown me in the future. This publicaon does not in any way
warrant descripon accuracy or guarantee the use for the product to which it refers. Imagine Communicaons reserves
the right, without noce to make such changes in equipment, design, specicaons, components, or documentaon as
progress may warrant to improve the performance of the product.
Trademarks
6800+™, ADC™, CCS Navigator™, Channel ONE™, ChannelView™, ClipSync™, Delay™, D Series™, D Series DSX™, Deliver
the Moment™, Delivering the Moment™, FAME™, Farad™, G8™, G Scribe™, HView™, IconMaster™, IconLogo™, IconSta
-
on™, IconKey™, InfoCaster™, InfoCaster Creator™, InfoCaster Manager™, InfoCaster Player™, InstantOnline™, Invenio®,
Live Update™, mCAPTURE™, Magellan™, Magellan CCS Navigator™, Magellan Q SEE™, MulService SDN™, NetPlus™,
NetVX™, NewsForce™, Nexio® G8™, Nexio AMP® ChannelView™, Nexio® Channel ONE™, Nexio® ClipSync™, Nexio®
Delay™, Nexio® Digital Turnaround Processor™, Nexio® Farad™, Nexio® G Scribe™, Nexio® IconKey™, Nexio® IconLogo™,
Nexio® IconMaster™, Nexio® IconStaon™, Nexio® InfoCaster™, Nexio® InfoCaster Creator™, Nexio® InfoCaster Manag
-
er™, Nexio® InfoCaster Player™, Nexio® InfoCaster Trac™, Nexio® InstantOnline™, Nexio® mCAPTURE™, Nexio® NewsForce™, Nexio® NXIQ™, Nexio® Playlist™, Nexio® Remote™, Nexio®RTX Net™, Nexio® TitleMoon™, Nexio® TitleOne™,
Nexio® Velocity ESX™, Nexio® Velocity PRX™, Nexio® Velocity XNG™, Nexio® Volt™, OPTO+™, Panacea™, Planum™,
Playlist™, Predator II GRF™, Predator II GX™, Punctuate™, Remote™, RTX Net™, QuiC™, Q SEE™, SD STAR™, Selenio™,
Selenio 6800+™, SelenioNext™, Selenio X50™, Selenio X85™, Selenio X100™, TitleMoon™, TitleOne™, Velocity ESX™,
Velocity PRX™, Velocity XNG™, Versio™, Videotek® SD STAR™, X50™, and X85™ are trademarks of Imagine Communica
-
ons or its subsidiaries.
Altude Express®, Connectus®, Enabling PersonalizedTV®, ICE® Broadcast System, ICE Illustrate®, ICE Q® algorithms, ICE
-
PAC®, Imagine ICE®, Inscriber®, Inscriber® Connectus®, Invenio®, NEO®, Nexio®, Nexio AMP®, PersonalizedTV®, RouterWorks®, Videotek®, Videotek® ASI STAR®, Videotek® GEN STAR®, and Videotek® HD STAR® are registered trademarks of
Imagine Communicaons or its subsidiaries.
Microso® and Windows® are registered trademarks of Microso Corporaon. HD BNC is a trademark of Amphenol
Corporaon. Some products are manufactured under license from Dolby Laboratories. Dolby and the double D symbol
are registered trademarks of Dolby Laboratories. DTS Neural audio products are manufactured under license from DTS
Licensing Limited. DTS and the Symbol are registered trademarks & the DTS Logos are trademarks of DTS, Inc. © 2008
2010 DTS, Inc. All other trademarks and trade names are the property of their respecve companies.
Contact Informaon
Imagine Communicaons has oce locaons around the world. For locaons and contact informaon see:
hp://www.imaginecommunicaons.com/contact us/
Support Contact Informaon
For support contact informaon see:
▪ Support Contacts: hp://www.imaginecommunicaons.com/services/technical support/
▪ eCustomer Portal: hp://support.imaginecommunicaons.com
© 2014 Imagine Communicaons Corp. Proprietary and Condenal
OP+OER+S
Edition B
July 2010
OP+OER+HI+S
OP+OER+SF+D
OP+OER+SF+HI+D
3 Gb/s HD-SDI Optical-to-Electrical Receivers
Installation and Operation Manual
Contents
Preface
Manual Information .................................................................................v
Unpacking/Shipping Information ......................................................... vii
References ............................................................................................ viii
Safety Standards and Compliances ..........................................................x
Chapter 1: Introduction
General Description .................................................................................1
Main Features ............................................ .......................................1
Module Types ...................................................................................2
Back Modules ..........................................................................................3
Signal Flow ................ .................................... ..........................................4
OP+OER+S and OP+OER+HI+S Single-Slot .................................4
OP+OER+SF+D and OP+OER+SF+HI+D Dual-Slot .....................4
Chapter 2: Installation and Operation
Maximum Frame Power Ratings .............................................................5
Setting Jumpers ........................................................................................7
Installing and Removing the Modules .....................................................9
Installation Overview .................................................. ......................9
Back Module Installation ................................................................10
Front Module Installation ...............................................................11
Removing Modules .........................................................................12
Inspecting and Cleaning Fiber Optic Connections ................................13
Important Points ..............................................................................13
Inspection and Cleaning Procedure ................................................15
CCS Parameter List ................................................. ...............................17
LEDs and Alarms ....... .................................... ..................................... ...19
LEDs ...............................................................................................19
Alarms .............................................................................................21
OP+OER Installation and Operation Manual iii
Copyright © 2010, Harris Corporation
Contents
Chapter 3: Specifications
Power Consumption ..............................................................................23
Start-Up Time .................................................................................. ...... 23
Temperature ..........................................................................................23
Electrical Specifications ........................................................................ 24
Optical Specifications ........................................................................... 25
Appendix A: Laser Safety Guidelines
Laser Safety ........................................................................................... 27
Precautions for Enclosed Systems ................................................. 28
Precautions for Unenclosed Systems ............................................. 28
Labels .................................................................................................... 29
Appendix B: Communication and Control
Troubleshooting Tips
Software Communication Problems ......................................................31
Hardware Communication Problems ....................................................34
Index
Keywords ..............................................................................................35
iv OP+OER Installation and Operation Manual
Copyright © 2010, Harris Corporation
Manual Information
Purpose
This manual details the features, installation procedures, operational
procedures, and specifications of the OP+OER 3 Gb/s HD-SDI
Optical-to-Electrical Receivers.
Audience
This manual is written for engineers, technicians, and operators
responsible for the installation, setup, and operation of the OP+OER
3 Gb/s HD-SDI Optical-to-Electrical Receivers.
Revision History
Preface
OP+OER Installation and Operation Manual v
Copyright © 2010, Harris Corporation
Table P-1. Manual Revision History
Edition Date Revision History
A February 2009 Preliminary release
B July 2010 Addition of DWDM wavelengths
NOTE
Preface
Writing Conventions
To enhance your understanding, the authors of this manual have
adhered to the following text conventions:
Table P-2. Manual Style and Writing Conventions
Term or
Convention
Bold Indicates dialog boxes, property sheets, fields, buttons,
Italics Indicates email addresses, the names of books or
CAPS Indicates a specific key on the keyboard, such as ENTER,
Description
check boxes, list boxes, combo boxes, menus, submenus,
windows, lists, and selection names.
publications, and the first instances of new terms and
specialized words that need emphasis.
TAB, CTRL, ALT, or DELETE.
Code Indicates variables or command-line entries, such as a
DOS entry or something you type into a field.
> Indicates the direction of navigation through a hierarchy
of menus and windows.
hyperlink Indicates a jump to another location within the electronic
document or elsewhere
Internet address
Indicates a jump to a website or URL
Indicates important information that helps to avoid and
troubleshoot problems.
vi OP+OER Installation and Operation Manual
Copyright © 2010, Harris Corporation
Unpacking/Shipping Information
This product was carefully inspected, tested, and calibrated before
shipment to ensure years of stable and trouble-free service.
1. Check equipment for any visible damage that may have occurred
during transit.
2. Confirm that you have received all items listed on the packing list.
3. Contact your dealer if any item on the packing list is missing.
4. Contact the carrier if any item is damaged.
5. Remove all packaging material from the product and its associated
components before you install the unit.
In the unlikely event that your product fails to operate properly, contact
Customer Service to obtain a Return Authorization (RA) number, and
then send the unit back for servicing. Except for firmware upgrades,
OPTO+ modules are not designed for field servicing.
Preface
Keep at least one set of original packaging in the event that a product
needs to be returned for service. If the original package is not available,
you can supply your own packaging as long as it meets the following
criteria:
• The packaging must be able to withstand the product’s weight.
• The product must be held rigid within the packaging.
• There must be at least 2 in. (5 cm) of space between the product and
the container.
• The corners of the product must be protected.
Ship products back to us for servicing prepaid and, if possible, in the
original packaging material. If the product is still within the warranty
period, we will return the product prepaid after servicing.
OP+OER Installation and Operation Manual vii
Copyright © 2010, Harris Corporation
Preface
References
ANSI/SMPTE 259M-1997
10-Bit 4:2:2 Component and 4fsc NTSC Composite Digital Signals Serial Digital Interface (144/243/270/360 Mb/s SDI)
SMPTE 424M-2006
3Gb/s Signal/Data Serial Interface
SMPTE 425M-2006
3Gb/s Signal/Data Serial Interface - Source Image Format Mapping
SMPTE 372M-2002
Dual Link 292M Interface for 1920 x 1080 Picture Raster
SMPTE 344M-2000
540Mb/s Serial Digital Interface
SMPTE 292M-1999
Bit-Serial Digital Interface for High-Definition Television Systems (1.5
Gb/s SDI)
SMPTE 297M-2000
Serial Digital Fiber Transmission System for SMPTE 259M- and
SMPTE 292M- Signals
DVB A010 Rev.1
Interfaces for CATV/SMATV Headends and Similar Professional
Equipment (Annex B: ASI)
ITU-T G.694.2
Spectral Grids for WDM Applications: CWDM Wavelength Grid
ITU-T G.695
Optical Interfaces for Coarse Wavelength Division Multiplexing
Applications
ITU-T G.652
Characteristics of a Single-Mode Optical Fiber Cable
IEC 61754
• ST-PC Connector: Fibre Optic Connector Interfaces - Part 2: Type
BFOC/2,5 Connector Family
• SC-PC Connector: Fibre Optic Connector Interfaces - Part 4: Type
SC Connector Family
• FC-PC Conn ector: Fibre Optic Connector Inter faces - Part 13: Type
viii OP+OER Installation and Operation Manual
FC-PC Connector
Copyright © 2010, Harris Corporation
Preface
IEC 60874-14-2
Detail Specification for Fiber Optic Connector Ty pe SC-PC Tuned
Terminated to Single-Mode Fiber Type B1
IEC 60874-14-5
Detail Specification for Fiber Optic Connector Type SC-PC Un-Tuned
Terminated to Single-Mode Fiber Type B1
FCC Code of Federal Regulations (CFR) 47, part 15
• EN55103-1
EMC emission requirements applies to professional audio,
video, audio-visual and entertainment lighting control
apparatus
• EN55103-2
EMC immunity requirements applies to professional audio,
video, audio-visual and entertainment lighting control
apparatus
OP+OER Installation and Operation Manual ix
Copyright © 2010, Harris Corporation
Preface
Safety Standards and Compliances
See “Laser Safety” on page 27 to find the safety standards and
compliances for this product. A safety manual is included in the Harris
Infrastructure and Networking Documentation and Product Resources
DVD, and it can be downloaded from our website. Alternatively,
contact your Customer Service representative for a copy of this safety
manual.
Restriction on Hazardous Substances (RoHS) Directive
Directive 2002/95/EC—commonly known as the Europea n Union (EU)
Restriction on Hazardou s Substances (RoHS)—sets limits on the use of
certain substances found in electrical and electronic equipment. The
intent of this legislation is to reduce the amount of hazardous chemicals
that may leach out of landfill sites or otherwise contaminate the
environment during end-of-life recycling. The Directive took effect on
July 1, 2006, and it refers to the following hazardous substances:
• Lead (Pb)
• Mercury (Hg)
• Cadmium (Cd)
• Hexavalent Chromium (Cr-V1)
• Polybrominated Biphenyls (PBB)
• Polybrominated Diphenyl Ethers (PBDE)
According to this EU Directive, all products sold in the European Union
are fully RoHS-compliant and “lead-free.” (See our website for more
information.) Spare parts supplied for the repair and upgrade of equip
ment sold before July 1, 2006 are exempt from the legislation. Equipment that complies with the EU directive are marked with a
RoHS-compliant emblem, as shown in
Figure P-1. RoHS Compliance Emblem
Figure P-1.
-
xOP+OER Installation and Operation Manual
Copyright © 2010, Harris Corporation
Waste from Electrical and Electronic Equipment
(WEEE) Directive
The European Union (EU) Directive 2002/96/EC on Waste from
Electrical and Electronic Equipment (WEEE) deals with the collection,
treatment, recovery, and recycling of electrical and electronic waste
products. The objective of the WEEE Directive is to assign the
responsibility for the disposal of associated hazardous waste to either
the producers or users of these products. Effective August 13, 2005,
producers or users are required to recycle electrical and electronic
equipment at end of its useful life, and may not dispose of the
equipment in landfills or by using other unapproved methods. (Some
EU member states may have different deadlines.)
In accordance with this EU Directive, companies selling electric or
electronic devices in the EU will affix labels indicating that such prod
ucts must be properly recycled. (See our website for more information.)
Contact your local sales representative for information on returning
these products for recycling. Equipment that complies with the EU
directive is marked with a WEEE-compliant emblem, as shown in
Figure P-2.
Preface
-
OP+OER Installation and Operation Manual xi
Copyright © 2010, Harris Corporation
Figure P-2. WEEE Compliance Emblem
Preface
Safety Terms and Symbols
This product manual uses the following safety terms and symbols to
identify certain conditions or practices. See
and the frame Safety Instructions and Standards Manual for more
information.
Table P-3. Safety Terms and Symbols
WARNING: Identifies conditions or practices that can result in
personal injury or loss of life—high voltage is present.
Uninsulated dangerous voltage within the product’s enclosure
may be sufficient to constitute a risk of electric shock to persons.
CAUTION: Identifies conditions or practices that can result in
damage to the equipment or other property. Important operating
and maintenance (servicing) instructions are included in the
literature accompanying the product.
“Laser Safety” on page 27
xii OP+OER Installation and Operation Manual
Copyright © 2010, Harris Corporation
General Description
OP+OER modules are 3 Gb/s HD-SDI Optical-to-Electrical Receivers.
They are available in a sin gle- and d ouble-slot versions (the double-slot
version adds a passive splitter and additional reclocked outputs), and in
standard-sensitivity PIN and high-sensitivity APD versions.
Chapter 1
Introduction
Main Features
• 3 Gb/s HD-SDI capability
• Comprehensive operating controls, including automatic/manual
reclocking and rate selection, laser enable, and laser disable
• Comprehensive status reporting via CCS-compliant software and
control panels, including module ID, loss of input, signal lock
status, input data rate, and input optical power
• Available SC/PC, ST/PC, and FC/PC connectors (the SC/PC
connector is supplied standard)
• Hot-swappable installation and removal
• 1260 nm to 1620 nm capability
OP+OER Installation and Operation Manual 1
Copyright © 2010, Harris Corporation
Chapter 1: Introduction
Module Types
Table 1-1. Module Types
Product Description
OP+OER+S Single-slot standard-sensitivity SD-SDI PIN fiber receiver with
SC-type rear connector
OP+OER+HI+S Single-slot high-sensitivity SD-SDI APD fiber receiver with SC-type
rear connector
OP+OER+SF+D Dual-slot standard-sensitivity SD-SDI PIN fiber receiver with
single-mode fiber optic loop-through, and SC-type rear connector
OP+OER+SF+HI+D Dual-slot high-sensitivity SD-SDI APD fiber receiver with
single-mode fiber optic loop-through, and SC-type rear connector
Table 1-2. Hardware Upgrades (Available at Time of Order)
Connector Description
OP+OPT+ST ST/PC fiber optic connector option
OP+OPT+FC FC/PC fiber optic connector option
2OP+OER Installation and Operation Manual
Copyright © 2010, Harris Corporation
Loading...