iMageTech IMAGEMCU4035 User Manual

iMageTech MCU4 Wireless Meeting Speakerphone System

Packing:

iMageTech MCU4 unit USB cable USB adapter Terminal port

I/O Port & LED

(Differs according to VCS model)

MCU 4

S0 S1 S2 S3 S4M

VCS cable set

RESERVE

INDIVIDUAL

1 2 1 2

S0S1S2S3S4

(16pin+12pin)

+

G

-

SLAVE

OUTPUTINPUT

CONSOLE

1234 0

PAIR

1 2 3 4 5 6 128 117 9 10

1. Power indicator

2. Audio source status indicator

(Bluetooth/blue, USB/red, VCS/none)

3. Bluetooth connection status indicator (Blue)

4. System-reserved port

5. Audio Out (independent audio output)

6. Audio In (connect to Audio Out of the VCS)

7. Audio Out (connect to the Audio In of the
VCS)

8. Bluetooth Speakerphone pairing button (S0,
S1, S2, S3, S4)

9. Console pairing button

10. Bluetooth audio source pairing button

11. Audio source selection switch (video, USB, Bluetooth)

12. USB power

Start

Step1 : Connect the USB adapter (No.12) to the iMageTech MCU 4 Wireless Meeting Speakerphone System.

Step2 : Press the “Bluetooth Speakerphone pairing button (No.8)” on the back for 3 seconds, and wait until “the Bluetooth connection status indicator

(blue)” rapidly flashes, then it can automatically be mapped to the iMage A1/A2 Bluetooth Conference Speakerphone. Simply pair five sets of
iMage A1/A2 Bluetooth Conference Speakerphones to S0, S1, S2, S3 and S4 in order (make sure that the iMage A1/A2 Bluetooth Conference
Speakerphone is set to “Adpter mode” before pairing).

Step3 : Select audio source (Bluetooth, USB or video mode). You can select Bluetooth to connect mobile devices or USB devices to the computer, or connect

a VCS using dedicated audio cables. If Bluetooth audio source is selected, please pair it using the Bluetooth audio source pairing button (No.10).

SOURCE

Specification

Model:
iMageTech_MCU4_03
Dimensions:

265mm X 127mm X 44.5mm

Weight:

445±5g

Bluetooth Version:

Bluetooth v3.0+EDR/AGHFP V1.6

Operating Frequency:

2402MHz~2480MHz

Module Type:
Bluetooth Specification V3.0 Class 2 and Class 3

＊Note: The data listed above were acquired by laboratory testing; actual data may vary according to different usage scenarios.

Audio Input/Output Type:
Bluetooth/Terminal/USB
Audio Performance:
Sample rate: 16K
Crosstalk: 75dB
SNR: 85dB

Audio Mixer:

5 channel analog in/out
Audio Input:
MIC in/Line In

Impedance: < 10 KΩ
Maximum Level: 0 dB

Audio Output:

Impedance: > 600 Ω
Maximum Level: 0 dB
Individual Audio Output:
Impedance: > 600 Ω
Maximum Level: 0 dB
Configuration & Admin Software:

iMageTech Audio Parameter Editor....TBD

Control Ports:
Serial Command Protocol Only (Console

software not supported on RS- 232 port)
DB-9 female - Reserve
38,400 baud rate; 8 bits,1 stop bit, no parity

USB:
Mini-USB Type B
Antenna Type:
Build-in Antenna

Power:
DC5v ±10%

Operating Temperature:

0 ~ 60℃

Optional Accessories:
iMage A1/A2 Bluetooth Conference Speakerphone
PSTN/SIP Moduel
Dial Pad

Source

The iMageTech MCU4 Wireless Meeting Speakerphone System can quickly connect to the audio device you require through the “audio source
selection switch (No.11)”; it provides three connection modes: Bluetooth, USB and VCS.
＊Bluetooth mode: Press and hold the “Bluetooth audio source pairing button (No.10)” for 3 seconds to enter pairing mode to pair and use the

device.
＊USB mode: Simply connect the PC and the iMageTech MCU4 Wireless Meeting Speakerphone System with a USB cable.
＊VCS mode: Please refer to the chapters “Connecting VCS” and “Wiring method”.

LED Indicator Bluetooth connection status display

The current connection status can be determined by how the “Bluetooth
connection status indicator (blue)” flash:
＊Entering pairing mode: Flash rapidly
＊Pairing successful: Light remains constantly
＊Flash once every 5 seconds: No devices to pair

Notes

＊This product must be used with iMage A1/A2 Bluetooth Conference Speakerphone and be set up by professional engineers before it can be used; please contact an engineer if you encounter any problems during use.
＊When connecting with iMage A1/A2 Bluetooth Conference Speakerphone, the maximum distance allowed between the two is approximately 10 meters provided that there are no large objects (such as walls etc) or barriers

in between them.

＊iMageTech MCU4 Wireless Meeting Speakerphone System can be paired with a maximum of 5 iMage A1/A2 Bluetooth Conference Speakerphones. Please be careful to only pair one speakerphone at a time; when one

speakerphone is successfully paired with the system, then proceed to pair the next one.

＊If you are pairing your iMageTech MCU4 Wireless Meeting Speakerphone System and iMage A1/A2 Bluetooth Conference Speakerphone for the first time, it takes approximately 30~45 seconds to complete the pairing

process; but if you have previously paired them before, pairing can be completed in approximately 10 seconds.

Statement

This product complies with the provisions of the low-power radio wave radiation Administrative Regulations Article XII-XIV etc.
＊Without permission granted by the DGT, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power

radio-frequency devices.

＊The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved.
＊The said legal communications means radio communications is operated in compliance with the Telecommunications Act.
＊The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices.

Contact Us! Need more help? Please contact us now

1. Website Introduction: http://www.iMagetech.com.tw (provides the newest support information and online user manual)

2. E-mail address: http://www.iMagetech.com.tw/contact.php

3. Please call: 886-2-27967771

4. Address 5F., No.16, Ln.15, Sec. 6, Minquan E. Rd., Neihu Dist., Taipei City 114