iMageTech IMAGEA2SPK01 Users Manual

iMage A2 Bluetooth Conference Speakerphone
Packing
1. iMage A2 Bluetooth Conference Speakerphone
2. Micro-USB cable
3. User manual
Welcome!
Thank you for purchasing iMage A2 Bluetooth Conference Speakerphone; this instrucon manual will guide you on how to start
using this product.
I/O Port buttons and slots
1. Increase volume
2. Lower volume
3. Mute 4: Mute microphone 5: Answer 6: Hang up
7: Mode selecon
8: Mode status
9: Power status
Specification
Dimensions: 165mm X 165mm X 55mm Product weight: 360±5g Bluetooth version: Bluetooth v3.0+EDR/HFP/A2DP/WBS
Communicaon me: 6~8 hr.(BT) Playback me: 6~8 hr.(BT), 8~10 hr.(AUX) Standby me: 48~60 hr.(BT) Baery capacity: 950mAH Recepon angle: Omni-Direconal Operang frequency: 2402MHz-2480MHz Recepon distance: 0.3~3m
Audio output: Bluetooth/USB Audio input: Bluetooth/USB/AUX Module type: GFSK Antenna type: Build-in Antenna
Operang environment: 0 ~ 70
* Note: Data listed above were measured by actual testing in laboratories; actual data may differ according to usage scenarios.
Start
Turn on the power and start iMage A2 Bluetooth Conference Speakerphone; press the (mode selecon) buon to select the
mode you need.
Note: The baery life will significantly decrease if your device has not been charged for a lone me.Therefore, we recommend you to charge
your device at least once every week
.
10: Audio In
AUX IN
11. USB Slot
12. Power switch
LED Indicator
Bluetooth Mode USB Mode AUX Mode Adapter Mode
Power status/Charging
Charing First!
Please connect the USB cable to iMage A2 Bluetooth Conference Spea­kerphone to charge it; it is recommended to fully charge the power for
approximately 6 hours (charge unl power indicator goes off) before using it for the first me.
Power Status
When the power is turned on, if one of the four mode indicators on right has a blue light on, it means that the unit is currently powered
Charging: When the orange light is constantly on, it means that it is
currently charging; when the orange light goes off, it means
that charging is complete.
Power remaining: If the blue light flickers it means
that there is
sufficient power remaining; if the red light flickers it
means that power is low and requires charging.
the
-on.
Mode selection: Bluetooth Mode
You can connect other portable devices or computer using
Bluetooth connecon to make iMage A2 Bluetooth Conference Speakerphone your mulmedia speakerphone.
Connecon method:
1. Select “Search for Bluetooth device” on the device you want to connect.
2. You will see “iMage A2_XX (number differs according to the different devices)”; click on it to perform pairing.
3. Pairing complete.
Blue light remains constantly on: Bluetooth device has successfully connected with iMage A2 Bluetooth Conference Speakerphone, and supports HFP and A2DP.
* If the device could not be paired, you can clear the previous pairing data to pair it over again; press and hold the hang up
buon for 3 seconds and wait unl you hear the prompt then
release it to search for iMage A2 Bluetooth Conference Speakerphone again for pairing.
* Please confirm the Bluetooth chip built in the computer before connecng to a PC or notebook using Bluetooth Mode, and
download the related driver programs etc. from the original manufacturer of the chip; please refer to the user manual of your computer for details.
Mode selection: AUX Mode
You can make iMage A2 Bluetooth Conference Speakerphone an
expansion speaker by connecng it to a signal source using a 3.5Ø
audio cable.
Connecon method: Connect the audio output of the device (PC, NB etc.) to the Audio In socket(3.5Ø jack) of iMage A2 Bluetooth
Conference Speakerphone.
Mode selection: USB Mode
You can connect to a PC or notebook through Micro-USB to make iMage A2 Bluetooth Conference Speakerphone your expansion speakerphone set.
Connecon method:
1. First connect the USB cable to the Micro-USB jack of iMage A2
Bluetooth Conference Speakerphone.
2. Wait for the computer to automacally install the drivers (please first confirm that your computer is connected to the internet).
3. Set the “Playback device” and “Recepon device” of the computer
as iMage A2.
* To use iMage A2 Bluetooth Conference Speakerphone with specific applicaon programs, you must first go to the program’s sengs to
select the
“Playback device” and “Recepon device”
.
Mode selection: Adapter Mode (optional purchase)
You can purchase the
iMage A1 Bluetooth Adapter Tx/Rx addionally to connect the audio
input and output of the video device, making iMage A2 Bluetooth Conference Speakerphone your external auxiliary speakerphone for your video set.
Connecon method:
1. Connect the
Bluetooth Adapter Tx/Rx output/input to the audio input/output of
the video device.
2. Connect the
Bluetooth Adapter Tx/Rx power and press the connect (Bluetooth connecon) buon.
3. iMage A2 Bluetooth Conference Speakerphone will automacally
connect with the adapter. * Please refer to the user manual of System
or iMage A1 Bluetooth Adapter Tx/Rx for detail seng
process.
iMageTech MCU4 Speakerphone System
iMageTech MCU4 Speakerphone System
iMageTech MCU4 Speakerphone System
iMageTech MCU4 Speakerphone
or
or iMage A1
or iMage A1
FAQ
I hear connuous burst noises * Bluetooth is a wireless technology and is very sensive to the
objects between the connected devices.If there are no large objects (such as walls etc.) blocking between iMage A2 Bluetooth
Conference Speakerphone and the connected device, the maximum allowed distance between the two can reach up to 10 meters.
I cannot receive calls using iMage A2 Bluetooth Conference
Speakerphone
* Please confirm that the mode selected is “Bluetooth Mode”. * Please confirm that iMage A2 Bluetooth Conference Speakerphone
has successfully paired with your device.
* Please increase the volume of iMage A2 Bluetooth Conference
Speakerphone.
I had problems during pairing
* You may have accidently deleted the pairing data during operaon.
- Please refer to the pairing instrucons in the “Bluetooth Mode”
chapter.Problems faced when playing music from music devices
(mobile phones, PC, MP3 players etc.)
* Please confirm that other devices support Bluetooth 3.0
(downwards compable) and A2DP, or else it will not be able to operate.Please refer to the user manual of the device used, and find
out how to pair it with the Bluetooth playback device.
Statement
This product complies with the provisions of the low-power radio wave radiaon Administrave Regulaons Arcle XII-XIV etc. * Without permission granted by the DGT, any company, enterprise, or user is not allowed to change frequency, enhance transming power or alter original characterisc as well as performance to an
approved low power radio-frequency devices.
* The low power radio-frequency devices shall not influence aircra security and interfere legal communicaons; If found, the user shall cease operang immediately unl no interference is achieved. * The said legal communicaons means radio communicaons is operated in compliance with the Telecommunicaons Act. * The low power radio-frequency devices must be suscepble with the interference from legal communicaons or ISM radio wave
radiated devices.
Contact Us!
1. Website Introducon: hp://www.iMagetech.com.tw (provides the newest support informaon and online user manual)
2. E-mail address: hp://www.iMagetech.com.tw/contact.php
3. Please call: 886-2-27967041
4. Address: 5F., No.16, Aly. 15, Sec. 6, Minquan E. Rd., Neihu Dist.,
Taipei City 114
Notice: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.
Loading...