Image IMTL39105.0 User Manual

Model No. IMTL39105.0

Visit our website at

www.imagefitness.com

new products, prizes,

fitness tips, and much more!

Serial No.

Serial Number

Decal

QUESTIONS?

As a manufacturer, we are com­mitted to providing complete
customer satisfaction. If you
have questions, or if parts are
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.

USER'S MANUAL

CALL TOLL-FREE:

1-800-753-4645

Mon.–Fri., 6 a.m.–6 p.m. MST

ON THE WEB:
www.iconservice.com

CAUTION

Read all precautions and instruc­tions in this manual before using
this equipment. Save this manual
for future reference.

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Note: An EXPLODED DRAWING and a PART LIST are attached in the center of this manual.

IMAGE is a registered trademark of ICON IP, Inc.

2

IMPORTANT PRECAUTIONS

WARNING: T

following important precautions and information before operating the treadmill.

1. It is the responsibility of the owner to ensure
hat all users of this treadmill are adequately

t
informed of all warnings and precautions.

2. Use the treadmill only as described in this

manual.

3. Place the treadmill on a level surface, with at

least eight feet of clearance behind it and two
feet on each side. Do not place the treadmill
on any surface that blocks air openings. To
protect the floor or carpet from damage, place
a mat under the treadmill.

4. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.

5. Do not operate the treadmill where aerosol

products are used or oxygen is administered.

6. Keep children under the age of 12 and pets

away from the treadmill at all times.

7. The treadmill should not be used by persons

weighing more than 275 pounds. Never allow
more than one person on the treadmill at a time.

8. Wear appropriate exercise clothes when

using the treadmill. Do not wear loose clothes
that could become caught in the treadmill.
Athletic support clothes are recommended
for both men and women.

letic shoes. Never use the treadmill with bare
feet, wearing only stockings, or in sandals.

9. When connecting the power cord (see page 10),

plug the power cord into a surge suppressor
(not included) and plug the surge suppressor
into a grounded circuit capable of carrying 15
or more amps. No other appliance should be on
the same circuit. Do not use an extension cord.

10. Use only a single-outlet surge suppressor that

meets all of the specifications described on
page 10. To purchase a surge suppressor, see
your local IMAGE dealer or call the toll-free
telephone number on the front cover of this
manual
your local electronics store.

and order part number 146148, or see

o reduce the risk of burns, fire, electric shock, or injury to persons, read the

11. Failure to use a properly functioning surge
uppressor could result in damage to the con-

s
trol system of the treadmill. If the control sys­tem is damaged, the walking belt may change
speed, accelerate, or stop unexpectedly,
which may result in a fall and serious injury.

12. Keep the power cord and the surge suppres-

sor away from heated surfaces.

13. Never move the walking belt while the power

is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See
TROUBLESHOOTING on page 17 if the tread­mill is not working properly.)

14. Never start the treadmill while you are stand-

ing on the walking belt. Always hold the
handrails while using the treadmill.

15. The treadmill is capable of high speeds.

Adjust the speed in small increments to avoid
sudden jumps in speed.

16. The pulse sensor is not a medical device.

Various factors, including the user's move­ment, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.

Always wear ath

-

Never leave the treadmill unattended while it

17.

is running. Always remove the key, unplug
the power cord, and move the reset/off circuit
breaker to the off position when the treadmill
is not in use. (See the drawing on page 5 for
the location of the circuit breaker.)

18. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See
ASSEMBLY on page 6, and HOW
AND MOVE THE TREADMILL on page 16.)
You must be able to safely lift 45 pounds (20
kg) to raise, lower, or move the treadmill.

19. When folding or moving the treadmill, make

sure that the storage latch is fully closed.

TO

FOLD

3

20. Inspect and properly tighten all parts of the
readmill every three months.

t

21. Never drop or insert any object into any open­ng.

i

22.

DANGER: Always unplug the power

cord immediately after use, before cleaning
the treadmill, and before performing the main­tenance and adjustment procedures de-

scribed in this manual. Never remove the

otor hood unless instructed to do so by an

m
authorized service representative. Servicing
other than the procedures in this manual

hould be performed by an authorized service

s
representative only.

23. The treadmill is intended for in-home use
only. Do not use the treadmill in any
commercial, rental, or institutional setting.

WARNING: Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decals shown here have been placed on your treadmill. If a decal is missing, or
if it is not legible, please call the toll-free telephone number on the front cover of
this manual and order a free replacement decal. Note: The decals are not shown at
actual size.

4

BEFORE YOU BEGIN

Thank you for selecting the new IMAGE®15.0 R tread­mill. The IMAGE 15.0 R treadmill offers a selection of
features designed to make your workouts at home

ore enjoyable and effective. And when you’re not ex-

m

rcising, the unique IMAGE 15.0 R treadmill can be

e
folded up, requiring less than half the floor space of
other treadmills.

For your benefit, read this manual carefully before
you use the treadmill. If you have questions after

reading this manual, please see the front cover of this
manual. To help us assist you, note the product model

Accessory Tray

Handrail

number and serial number before calling. The model
number of the treadmill is IMTL.39105.0. The serial
number can be found on a decal attached to the tread-

ill (see the front cover of this manual for the location).

m

To avoid a registration fee for any service needed
under warranty, you must register the treadmill at
www.iconservice.com/registration.

Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.

Fan

Console

Key/Clip

Storage Latch

Walking Belt

Foot Rail

BACK

Rear Roller
Adjustment Bolts

Upright

Reset/Off

Circuit Breaker

Power Cord

RIGHT SIDE

Cushioned Walking Platform

for maximum exercise comfort

5

ASSEMBLY

1” Tek Screw (39)–4

5/16” Star

Washer (97)–6

Wheel Nut (32)–2

3/4” Screw (2)–6

Silver Ground Screw

(75)–1

3” Bolt (37)–6

4” Bolt (98)–2

1/2” Screw (48)–6

2” Bolt (64)–2

o hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480.

T

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench
and your own Phillips screwdriver and needlenose pliers .

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.

For help identifying assembly hardware, see the drawings below.

1. Make sure that the power cord is unplugged.

With the help of a second person, carefully tip the tread­mill onto its left side as shown. Partially fold the Frame
(86) so that the treadmill is more stable. IMPORTANT:

Do not fully fold the treadmill until it is completely
assembled.

Attach four Base Pads (57) (only three shown) to the
bottom of the Base (69) with four 1” Tek Screws (39).

Attach a Wheel (66) to the Base (69) with a 2” Bolt (64)
and a Wheel Nut (32) as shown.

Wheel Nut; the Wheel should turn freely.

Do not overtighten the

6

1

39

57

39

57

69

86

39

57

64

66

32

2. Identify the Right Upright (9) and the Left Upright (61).

traighten the Upright Wire (42), and feed it into the lower

S
end of the Right Upright (9) and out of the upper end.

ext, hold the Right Upright against the right side of the

N
Base (69); make sure that the Right Upright is turned

so that the upper end is angled in the direction
shown. Hand tighten two 3” Bolts (37) with two 5/16” Star
Washers (97) into the Base and the Right Upright; be
careful not to damage the Upright Wire. Do not
tighten the Bolts yet.

With the help of a second person, carefully tip the tread­mill onto its other side. Attach the other Wheel (not
shown) as described in step 1, and then attach the Left
Upright (61) as described above.

two small holes in the Left Upright are in the posi­tion shown. Note: There is not an upright wire on the

left side.

Make sure that the

2

37

97

42

9

69

Small
Holes

61

3. With the help of a second person, carefully tip the tread­mill back to the upright position.

Identify the Right Handrail (72), which has a large hole in
the left side. Feed the Upright Wire (42) into the hole in
the bottom of the Right Handrail and out of the large hole
in the side. Note: It may be helpful to use needlenose pli­ers to pull the Upright Wire out of the hole.

Attach the upper end of the Right Handrail (72) to the
Right Upright (9) with a 3” Bolt (37); do not tighten the
Bolt yet. Attach the lower end of the Right Handrail with
a 4” Bolt (98) and a 5/16” Star Washer (97). Then,

tighten the 3” Bolt and the 4” Bolt.

Attach the Left Handrail (71) in the same way. Note:
There is not a wire harness on the left side.

3

71

37

42

37

61

98

97

72

Hole

Hole

9

98

97

7