Image IMTL15992 Owner's Manual

USER'S MANUAL

¨

Serial Number Decal

Model No. IMTL15992
Serial No.

CAUTION

Read all precautions and instruc­tions in this manual before using
this equipment. Save this manual
for future reference.

Write the serial number in the space
above for future reference.

Patent Pending

Visit our website at

www.imagefitness.com

new products, prizes,

fitness tips, and much more!

Questions?

As a manufacturer, we are com­mitted to providing complete
customer satisfaction. If you have
questions, or if there are missing
parts, we will guarantee complete
satisfaction through direct assis­tance from our factory.

TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained technicians
on our Customer Hot Line will
provide immediate assistance,
free of charge to you.

CUSTOMER HOT LINE:

1-800-999-3756

Mon.ÐFri., 6 a.m.Ð6 p.m. MST

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

HOW TO USE THE HEART RATE MONITOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

FULL ONE YEAR WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Note: An EXPLODED DRAWING is attached in the center of this manual.

2

1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.

2. Use the treadmill only as described in this
manual.

3. Place the treadmill on a level surface, with
eight feet of clearance behind it. Do not place
the treadmill on any surface that blocks air
openings. To protect the floor or carpet from
damage, place a mat under the treadmill.

4. Keep the treadmill indoors, away from mois­ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.

5. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.

6. Keep children under the age of 12 and pets
away from the treadmill at all times.

7. The treadmill should not be used by persons
weighing more than 300 pounds.

8. Never allow more than one person on the
treadmill at a time.

9. Wear appropriate exercise clothing when
using the treadmill. Do not wear loose cloth­ing that could become caught in the treadmill.
Athletic support clothes are recommended for

both men and women. Always wear athletic

shoes. Never use the treadmill with bare feet,
wearing only stockings, or in sandals.

10. When connecting the power cord (see page 7),
plug the power cord into a surge protector
(not included) and plug the surge protector
into a grounded circuit capable of carrying 15
or more amps. No other appliance should be
on the same circuit.

11. Use only a UL-listed surge protector, rated at
15 amps, with a 14-gauge cord of five feet or
less in length. Do not use an extension cord.

12. Keep the power cord and the surge suppres­sor away from heated surfaces.

13. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See
BEFORE YOU BEGIN on page 4 if the tread­mill is not working properly.)

14. Never start the treadmill while you are stand­ing on the walking belt. Always hold the
handrails while using the treadmill.

15. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the

following important precautions and information before operating the treadmill.

IMPORTANT PRECAUTIONS

TABLE OF CONTENTS

16. The heart rate monitor is not a medical de­vice. Various factors, including the user's
movement, may affect the accuracy of heart
rate readings. The heart rate monitor is in­tended only as an exercise aid in determining
heart rate trends in general.

17. Using the included hand weights and not hold-

ing the handrails may compromise your ability
to maintain your balance. Exercises using
hand weights should be attempted only by ex­perienced users.

18. Never leave the treadmill unattended while it
is running. Always remove the key, unplug
the power cord and move the on/off switch to
the off position when the treadmill is not in
use. (See the drawing on page 4 for the loca­tion of the on/off switch.)

19. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See
ASSEMBLY on page 5, and HOW TO MOVE
THE TREADMILL on page 24.) You must be
able to safely lift 45 pounds (20 kg) in order

to raise, lower, or move the treadmill.

20. When folding or moving the treadmill, make
sure that the pin on the lock knob is inside of
the catch (see page 24).

21. When using i-FIT.com CDÕs and videos, an
electronic ÒchirpingÓ sound will alert you
when the speed and/or incline of the treadmill
is about to change. Always listen for the
ÒchirpÓ and be prepared for speed and/or in-

cline changes. In some instances, the speed
and/or incline may change before the per­sonal trainer describes the change.

22. When using i-FIT.com CDÕs and videos, you
can manually override the speed and incline
settings at any time by pressing the speed
and incline buttons. However, when the next
ÒchirpÓ is heard, the speed and/or incline will
change to the next settings of the CD or video
program.

23. Always remove i-FIT.com CDÕs and videos
from your CD player or VCR when you are not
using them.

24. Inspect and tighten all parts of the treadmill
every three months.

25. Never drop or insert any object into any open­ing.

26. DANGER: Always unplug the power

cord immediately after use, before cleaning
the treadmill, and before performing the main­tenance and adjustment procedures de­scribed in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service
representative only.

27. This treadmill is intended for in-home use
only. Do not use this treadmill in any commer­cial, rental, or institutional setting.

WARNING: Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.

The decal shown below has been placed on the treadmill. If the
decal is missing, or if it is not legible, please call our Customer
Service Department, toll-free, to order a free replacement decal
(see ORDERING REPLACEMENT PARTS on page 31 of this man­ual). Apply the decal in the location shown.

Note: The decal is shown at 38% of actual size.

SAVE THESE INSTRUCTIONS

3

4

Thank you for selecting the IMAGE¨10.6Qi treadmill.
The IMAGE 10.6Qi treadmill combines advanced tech­nology with innovative design to let you enjoy an effec­tive form of cardiovascular exercise in the convenience
and privacy of your home. And when youÕre not exer­cising, the unique IMAGE 10.6Qi can be folded up, re­quiring less than half the floor space of other treadmills.

For your benefit, read this manual carefully before
using the treadmill. If you have additional questions,

please call our Customer Service Department toll-free

at 1-800-999-3756, Monday through Friday, 6 a.m.
until 6 p.m. Mountain Time (excluding holidays). To
help us assist you, please note the product model
number and serial number before calling. The model
number of the treadmill is IMTL15992. The serial num­ber can be found on a decal attached to the treadmill
(see the front cover of this manual for the location).

Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.

Handrail

Lock Knob

Key/Clip

Circuit

Breaker

Walking Belt

Foot Rail

Power Cord

Cushioning System

Adjustment Knob

Rear Roller
Adjustment Bolts

Water Bottle

Holder (Bottle

not included)

Reading Rack

Accessory Tray

Console

Upright

On/Off
Switch

BEFORE YOU BEGIN

5

ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. A rubber mallet may be needed for
assembly.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.

1. With the help of a second person, carefully raise the
Uprights (65) until the treadmill is in the position shown.

2. Press the Lock Knob Sleeve (68) into the left Upright
(65). If necessary, use a rubber mallet to tap the Lock
Knob Sleeve into the Upright.

Remove the Lock Knob (67) from the Lock Pin (72).
Make sure that the Lock Pin Collar (70) and the Spring
(69) are on the Lock Pin and insert the Lock Pin into the
left Upright (65). Tighten the Lock Knob onto the Lock
Pin.

3. Make sure that all parts are tightened before you use the treadmill. Keep the included allen wrench in a

secure place. The allen wrench is used to adjust the walking belt (see pages 25 and 26). To protect the floor
or carpet from damage, place a mat under the treadmill.

65

1

72

70

69

67

68

65

2

HOW TO PUT ON THE HEART RATE MONITOR

The heart rate monitor consists of two components:
the chest strap and the sensor unit (see the drawing
below). Insert the tab on one end of the chest strap
through the hole in one end of the sensor unit. Press
the end of the sensor unit under the buckle on the chest
strap. The tab should be almost flush with the front of
the sensor unit.

Next, wrap the
heart rate moni­tor around your
chest and
attach the other
end of the chest
strap to the sen­sor unit. Adjust
the length of the
chest strap, if
necessary. The
heart rate moni­tor should be under your clothing, tight against your
skin, and as high under the pectoral muscles or
breasts as is comfortable. Make sure that the logo on
the sensor unit is facing forward and is right-side-up.

Pull the sensor unit away from your body a few inches
and locate the two electrode areas on the inner side.
The electrode areas are the areas covered by shallow
ridges. Using saline solution such as saliva or contact
lens solution, wet both electrode areas. Return the
sensor unit to a position against your chest.

HEART RATE MONITOR CARE AND MAINTENANCE

¥ Thoroughly dry the heart rate monitor after each

use. The heart rate monitor is activated when the
electrode areas are wetted and the heart rate
monitor is put on; the heart rate monitor shuts off
when it is removed and the electrode areas are
dried. If the heart rate monitor is not dried after each

use, it may remain activated longer than necessary,
draining the battery prematurely.

¥ Store the heart rate monitor in a warm, dry place.

Do not store the heart rate monitor in a plastic bag
or other container that may trap moisture.

¥ Do not expose the heart rate monitor to direct

sunlight for extended periods of time; do not expose
it to temperatures above 122¡ Fahrenheit (50¡
Celsius) or below 14¡ Fahrenheit (-10¡ Celsius).

¥ Do not excessively bend or stretch the sensor unit

when using or storing the heart rate monitor.

¥ Clean the sensor unit using a damp clothÑnever

use alcohol, abrasives, or chemicals. The chest
strap may be hand washed and air dried.

HEART RATE MONITOR TROUBLE-SHOOTING

The instructions on the following pages explain
how the heart rate monitor is used with the console.
If the heart rate monitor does not function properly,
try the steps below.

¥ Make sure that the heart rate monitor is under your

clothing, tight against your skin, and as high under
the pectoral muscles or breasts as is comfortable.
The logo on the sensor unit must be facing forward
and be right-side-up. Note: If the heart rate monitor
does not function when positioned as described, try
moving it slightly lower or higher on your chest.

¥ Use saline solution such as saliva or contact lens

solution to wet the two electrode areas on the
sensor unit. If heart rate readings do not appear until
you begin perspiring, re-wet the electrode areas.

¥ As you walk or run on the treadmill, position your-

self near the center of the walking belt. For the

console to display heart rate readings, the user
must be within armÕs length of the console.

¥ The heart rate monitor is designed to work with

people who have normal heart rhythms. Heart rate
reading problems may be caused by medical
conditions such as premature ventricular contrac­tions (pvcs), tachycardia bursts, and arrhythmia.

¥ The operation of the heart rate monitor can be

affected by magnetic interference caused by high
power lines or other sources. If it is suspected that
this is a problem, try relocating the treadmill.

¥ The CR2032 battery may need to be replaced (see

page 27).

HOW TO USE THE HEART RATE MONITOR

Chest Strap

Tabs

Sensor Unit

Tab

Buckle

6

7

OPERATION AND ADJUSTMENT

THE PERFORMANT LUBETMWALKING BELT

Your treadmill features a walking belt coated with
PERFORMANT LUBETM, a high-performance lubricant.

IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walking plat­form. They will deteriorate the walking belt and
cause excessive wear.

HOW TO PLUG IN THE POWER CORD

Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your homeÕs power.
Voltage surges, spikes, and noise interference can re­sult from weather conditions or from other appliances
being turned on or off.

To decrease the pos­sibility of your tread­mill being damaged,
always use a surge
protector (not in­cluded) with your
treadmill.

Surge protectors are
sold at most hardware
stores and department
stores. Use only a UL­listed surge protector,
rated at 15 amps, with a
14-gauge cord of five
feet or less in length.

This product must be
grounded. If it should

malfunction or break
down, grounding pro­vides a path of least re­sistance for electric cur­rent to reduce the risk of

electric shock. This product is equipped with a cord
having an equipment-grounding conductor and a
grounding plug. Plug the power cord into a surge

protector, and plug the surge protector into an ap­propriate outlet that is properly installed and
grounded in accordance with all local codes and
ordinances.

This product is for use on a nominal 120-volt circuit,
and has a grounding plug that looks like the plug illus­trated in drawing 1 below. A temporary adapter that
looks like the adapter illustrated in drawing 2 may be
used to connect the surge protector to a 2-pole recep­tacle as shown in drawing 2 if a properly grounded out­let is not available.

The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician.

The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw. Some 2-pole receptacle outlet box

covers are not grounded. Contact a qualified elec­trician to determine if the outlet box cover is
grounded before using an adapter.

DANGER: Improper connection

of the equipment-grounding conductor can
result in an increased risk of electric shock.
Check with a qualified electrician or service­man if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug provided with the productÑif it will
not fit the outlet, have a proper outlet in­stalled by a qualified electrician.

1

2

Grounded Outlet Box

Grounded Outlet Box

Grounding Plug

Treadmill Power Cord

Grounding Plug

Grounding Plug

Grounding Pin

Surge Protector

Grounding Pin

Grounding Pin

Adapter

Lug

Metal Screw

Grounded Outlet

8

FEATURES OF THE CONSOLE

The treadmill console offers an impressive array of
features to help you get the most from your exercise.

When the console is in the manual mode, the speed
and incline of the treadmill can be changed with a
touch of a button. As you exercise, the console will
display instant exercise feedbackÑyou can watch your
progress on the LED track while the five displays show
your heart rate, the number of calories and fat calories
you have burned, the distance you have walked, the
incline level of the treadmill, the number of laps com­pleted, your speed, your pace, and workout time.

The console also offers four performance programs
and two total-body workout programs. Each program
automatically controls the speed and incline of the
treadmill as it guides you through an effective workout.
The total-body workout programs also prompt you to
use the included hand weights for upper-body exer­cise. Three pulse programs are also featured. Each
program controls the speed and incline of the treadmill
to keep your heart rate near a target level during your
workout.

The console even allows you to create custom workout
programs and store them in memory for future use.

The console also includes built-in iFIT.com technology.
iFIT.com technology is like having a personal trainer
right in your home. Using the included audio cable,
you can connect the treadmill to your home stereo,
portable stereo, or computer and play special iFIT.com
CD programs (CDÕs are available separately).

iFIT.com CD programs automatically control the speed
and incline of the treadmill as a personal trainer guides
you through every step of your workout. High-energy
music provides added motivation. Each CD features
two different programs designed by certified personal
trainers.

In addition, you can connect the treadmill to your VCR
and TV and play iFIT.com video programs (videocas­settes are available separately). Video programs offer
the same benefits as iFIT.com CD programs, but add
the excitement of working out with a class and an in­structorÑthe hottest new trend at health clubs.

With the treadmill connected to your computer, you
can also go to our new internet site at www.iFIT.com
and access basic programs, audio programs, and
video programs directly from the internet. And by
adding an optional upgrade module to the console,
you can use virtually endless features from our internet
site. See www.iFIT.com for complete details.

To purchase iFIT.com CDÕs, iFIT.com videocassettes,
or an optional upgrade module, call toll-free 1-800­735-0768.

To use the manual mode of the console, follow the
steps beginning on page 10. To use a performance
program or a total-body workout program, see
page 12. To use a pulse program, see page 13 or
page 15. To create a custom program, see page 16.

To use a custom program, see page 17.

To use iFIT.com CD or video programs, refer to
page 21. To use iFIT.com programs directly from

DIAGRAM OF THE CONSOLE

JI K P

BA C D E G H

F

R

L M Q S

T

O

N

Note: If there is a thin sheet of clear plastic
on the face of the console, remove it.

9

DIAGRAM OF THE CONSOLE

Refer to the drawing on the opposite page. Note: The
console can display exercise feedback in either
miles or kilometers. For simplicity, all instructions
in this section refer to miles.

A. Target Heart Rate displayÑWhen you are using a

pulse program, this display will show whether your
heart rate is near the target heart rate.

B. Pulse displayÑThis display shows your heart rate

when the heart rate monitor is worn. The heart­shaped indicator will flash each time your heart
beats.

C. Calories/Fat Calories displayÑThis display shows

the numbers of calories and fat calories you have
burned (see BURNING FAT on page 28). The
display will alternate between one number and the
other every seven seconds.

D. Distance/Incline/Laps displayÑThis display shows

the distance you have walked, the number of 1/4­mile laps you have completed, and the incline level
of the treadmill. The display will change from one
number to the next every seven seconds. Note:
Each time the Incline buttons are pressed, the
display will show the incline setting.

E. Program displayÑWhen the manual mode or an

iFIT.com program is selected, this display will show
your progress on an LED track. When a perfor­mance program, a total-body workout program, a
pulse program, or a custom program is selected,
the display will show the programÕs speed or heart
rate settings.

F. Hand Weight displayÑDuring the two total-body

workout programs, this display will prompt you to
use the included hand weights for upper-body
exercise as you walk on the treadmill.

G. Speed/Minutes-Mile displayÑThis display shows

the speed of the walking belt and your current pace
(pace is measured in minutes per mile). The display

will alternate between one number and the other
every seven seconds. Note: Each time the Speed
buttons are pressed, the display will show the speed
setting.

H. Time/Segment Time displayÑWhen the manual

mode or an iFIT.com program is selected, this dis­play will show the elapsed time. When a perfor­mance
program, a total-body workout program, a pulse

program, or a custom program is selected, the
display will show both the time remaining in the
program and the time remaining in the current
period of the program. The display will alternate
between one number and the other every seven
seconds. Note: When the Select Target program is
selected, the display will show the elapsed time
and the time remaining in the current period of the
program.

I. Pulse program profilesÑThese profiles show how

the target heart rate will change during pulse pro­grams.

J. Age and Enter buttonsÑThese buttons are used to

enter your age for pulse programs.

K. Performance program profilesÑThese profiles

show how the speed and incline of the treadmill will
change during performance programs.

L. Incline buttonsÑThese buttons control the incline of

the treadmill. The incline range is 0% to 10%.

M. Stop buttonÑThis button is used to stop the walking

belt.

N. Key with clipÑThe key turns the console on and off.

The clip is worn on the waistband of your clothes.

O. Start buttonÑThis button is used to start the walking

belt.

P. Mode indicatorsÑThese indicators show whether

the manual mode, a performance program, a total­body workout program, a pulse program, a custom
program, or an iFIT.com program is selected.

Q. Speed buttonsÑThese buttons control the speed

of the walking belt. The speed range is 0.5 mph to
12 mph. Note: When the Start button is pressed,
the walking belt will begin to move at 1.0 mph.

R. Total-body workout program profilesÑThese pro-

files show how the speed and incline of the tread­mill will change during total-body workout programs.

S. Program Select buttonÑThis button is used to

select the manual mode, performance programs,
total-body workout programs, pulse programs,
custom programs, and iFIT.com programs. Note:
If the walking belt is moving when the Select
Program button is pressed, the walking belt will
slow to a stop and the displays will be reset.

T. Record buttonÑThis button is used to program

10

HOW TO TURN ON THE POWER

Plug in the power cord (see HOW TO PLUG IN
THE POWER CORD on page 7).

Locate the on/off
switch on the front of
the treadmill. Make
sure that the on/off
switch is in the on
position.

Stand on the foot rails of the treadmill. Find the clip
attached to the key and slide the clip securely

onto the waistband
of your clothing.

Next, insert the key
into the console.
After a moment, the
displays, the LED
track, and various in­dicators on the con­sole will light.

HOW TO USE THE MANUAL MODE

Insert the key into the console.

See HOW TO TURN ON THE POWER at the left.

Select the manual mode.

When the key is in­serted, the manual
mode will automati­cally be selected and
the manual indicator
will light. If a program
has been selected, press the Program Select but­ton repeatedly to select the manual mode again.

Put on the heart rate monitor if desired.

For the Pulse display to show your heart rate, the
heart rate monitor must be worn. To put on the
heart rate monitor, see HOW TO USE THE
HEART RATE MONITOR on page 6.

Press the Start button to start the walking belt.

When the Start button is pressed, the LED track in
the center of the console will disappear in a coun­terclockwise direction. One flashing indicator will
then appear and the walking belt will begin to
move at 1.0 mph. Hold the handrails and begin
walking.

The LED track rep­resents a distance
of 1/4 mile. As you
exercise, the indica­tors around the
track will light one at
a time until the en­tire track is lit. The
track will then disappear in a counterclockwise di­rection and a new lap will begin.

To stop the walking belt, press the Stop button. All
displays will pause and the Time/Segment Time
display will begin to flash. To restart the walking
belt, press the Start button. To stop the walking
belt and reset the displays, press the Stop button,
remove the key, and then reinsert the key.

4

3

2

1

3

2

1

WARNING: To reduce the risk of

serious injury, read the following precautions
before operating the console.

¥ Do not stand on the walking belt when turn-

ing on the power or starting the walking belt.

¥ Always wear the clip (see part ÒNÓon page 8)

securely on the waistband of your clothing
while using the treadmill. If the key is pulled
from the console, the walking belt will stop.

¥ The treadmill is capable of high speeds.

Adjust the speed in small increments.

¥ The heart rate monitor is not a medical device.

Various factors may affect the accuracy of
heart rate readings. The heart rate monitor is
intended only as an exercise aid in determin­ing heart rate trends in general.

¥ If you have heart problems, or if you are over

60 years of age and have been inactive, do
not use the pulse programs. If you are taking
medication regularly, consult your physician
to find whether the medication will affect
your exercise heart rate.

¥ To reduce the risk of electric shock, keep

liquids away from the console and use only a
sealed water bottle.

On

Position

Adjust the speed and incline of the treadmill.

While the walking belt
is moving, adjust the
speed of the walking
belt by pressing the
Speed buttons. Each
time one of the but­tons is pressed, the speed will change by 0.1
mph. If the buttons are held down, the speed will
change in increments of 0.5 mph. The speed
range of the walking belt is 0.5 mph to 12 mph.

To vary your exercise,
the incline of the
treadmill can be
adjusted with the
Incline buttons. Each
time one of the but­tons is pressed, the incline will change by 0.5%.
The incline range is 0% to 10%. Note: After the
buttons are pressed, it may take a moment for the
treadmill to reach the selected incline setting.

Follow your progress with the five displays.

Pulse displayÑThis

display shows your
heart rate when the
heart rate monitor is
worn. Note: The heart
rate monitor will sam­ple your heart rate every few seconds; it may take
several seconds before an accurate heart rate is
shown. If your heart rate is not shown, see HEART
RATE MONITOR TROUBLE-SHOOTING on
page 6.

Calories/Fat Cal­ories displayÑThis

display shows the
numbers of calories
and fat calories you
have burned (see
BURNING FAT on page 28). The display will alter­nate between one number and the other every
seven seconds.

Distance/Incline/
Laps displayÑThis

display shows the
distance you have
walked, the number
of 1/4-mile laps you
have completed, and the incline level of the tread­mill. The display will change from one number to
the next every seven seconds. Note: Each time
the Incline buttons are pressed, the display will
show the incline setting.

Note: If the speed is displayed in miles per hour,
the distance will be displayed in miles; if the
speed is displayed in kilometers per hour, the dis­tance will be displayed in kilometers.

Speed/Minutes-Mile
displayÑThis display

shows the speed of the
walking belt and your
current pace (pace is
measured in minutes
per mile). The display will alternate between one
number and the other every seven seconds. Each
time the Speed buttons are pressed, the display
will show the speed setting.

Note: The speed can
be displayed in either
miles per hour (mph)
or kilometers per hour
(kph). To see which
unit of measurement is
selected, first hold down the Stop button while
inserting the key into the console. The Speed/
Minutes-Mile display will show an ÒEÓ for English
miles or an ÒMÓ for metric kilometers. Press the
Speed ▲▲button to change the unit of measure-

ment. Remove and then reinsert the key.

Time/Segment Time
displayÑWhen the

manual mode or an
iFIT.com program is
selected, this display
will show the elapsed
time. When a performance program, a total-body
workout program, a pulse program, or a custom
program is selected, this display will show both
the time remaining in the program and the time re­maining in the current period of the program. The
display will alternate between one number and the
other every seven seconds. Note: When the
Select Target program is selected, the display will
show the elapsed time and the time remaining in
the current period of the program.

When you are finished exercising, stop the
walking belt and remove the key.

Step onto the foot rails, press the Stop button, and
adjust the incline of the treadmill to 0%. Next,
remove the key from the console. Keep the key in
a secure place. Note: If the displays and indica-

tors on the console remain lit after the key is
removed, the console is in the ÒdemoÓ mode.
Refer to page 23 and turn off the demo mode.

Next, move the on/off switch near the power cord
to the off position.

7

6

5

11