Imada HTGS-ST-01-15, HTGS-ST-01-40, HTGS-ST-01-85 Data Sheet

3100 Dundee Rd., Suite 707, Northbrook, IL 60062

Tel: [phone] Fax: [phone]

www.imada.com E-mail: [e-mail]

IMADA, Inc.

®

FORCE & TORQUE MEASUREMENT

ISO 9001 & ISO/IEC 17025 ACCREDITED

imada

com

®

HTGS-ST-01 Specifications

Accuracy ± 0.5% ± 1 LSD
Selectable Units lbf-in, ozf-in, N-m, N-cm, kgf-m, kgf-cm
Overload Capacity 200% of F.S. (Overload indicator flashes beyond 110% of F.S.)
Power Rechargeable Ni-MH battery pack or AC adapter
Battery Indicator Indicates three charge states high, med and low
Memory Non-volative, recall up to 1,000 data
Setpoints Programmable high/low setpoints w/color-coded LEDs & output signal
Outputs USB (virtual COM port), RS-232C, Digimatic and ± 2 VDC analog
Operating Temp. 32° to 100°F (0° to 40°C)

Model Capacity (Resolution)

Pounds (lbf-in) Kilograms (kgf-cm) Newtons (N-cm)
HTGS-ST-01-15 15.00 (0.01) 20.00 (0.01) 200.0 (0.1)
HTGS-ST-01-40 40.00 (0.01) 50.00 (0.01) 500.0 (0.1)
HTGS-ST-01-85 85.0 (0.1) 100.0 (0.1) 1000 (1)

HTGS Ranges (Resolution) Accuracy: ±0.5% F.S. ±1 LSD

Easy-to-use menus in eight
languges make programming
simple. Select units, set high/low
setpoints, and all other functions.

Luminescent EL display shows
torque value, unit, and peak, and
can be configured with user­selectable data including memory
data, +NG count, high/low
setpoints, 1st and 2nd peaks, etc.

Color-coded LED indicators alert
the user to Go/NoGo conditions. Orange lights for less than low
setpoint, green lights between high and low, and red for over the high.

Process and transmit 2,000 actual data per second, not just the
peak from a high sampling rate. Optional Force Recorder data
acquisition software processes up to 2,000 data per second.

ZT Logger data acquisition software downloads data from the
gauge memory or captures a continuous stream of data at 10
data/second. Zero the gauge or capture data while at the computer.
All gauge programming can be set and saved from the software.

Hand Held Digital Cap Torque Tester

Luminescent EL Display, Multi-Language Menus

Series HTGS-ST-01

n

Luminescent EL display is highly visible in dark locations

n

Programmable high/low setpoints with color-coded LED indicators
and output signal for quick Go/No Go testing

n

Multi-language program menus: English, Spanish, French,
Chinese, German, Italian, Korean, Japanese

n

Ergonomic design, non-slip grips, heavy duty metal construction

n

USB (virtual COM port), RS-232C, Digimatic and Analog outputs

n

Processes and transmits 2,000 data/sec.

n

lbf-in, kgf-m, and N-m units are selectable

n

Overload capacity 200% of F.S.

n

1,000 data memory for recall or download

n

External switch display hold and clear

n

Internal Ni-MH batteries or AC adapter

n

Real time and peak mode (selectable)

n

Overload alarm and output signal

n

Kit includes, small table with stainless steel pegs, ZT Logger
data acquisition software, USB cable, hex wrench, AC
adapter/charger, calibration cert traceable to NIST and
carrying case (handles for 10N-m range only)

Program the gauge using simple
menus in English, Spanish, French,
Chinese, German, Italian, Korean,
or Japanese.

Capture 2,000 data/sec, not just the
peak and observe force changes in
fractions of a mS.

Program Menus

2,000 data/sec

Setup Menu

Date Format

Language >

Units

Specifications subject to change without notice.

Hand measure cap torque (up to 2"
diameters).

HTGS with small table