ILY Media Mirror Plus User Manual

Media Mirror

Media Mirror Plus

Duplicator

User’s Manual

0

Table of Contents

1. Disc to Disc

1.1. Copy……………………………………………………………….…..3

1.2. Copy + Compare…………………………………………………......3

1.3. Source Select….…………………………………………………......3

2. Flash to Disc

2.1. Copy……………………………………………….………………......4

2.2. Multi Session……………………………...……………………….....5

2.3. Set Over Size File….……………………...………………………....6

2.4. Set Span Mode……………………………...……………………......6

3. Disc to Flash (only available with All- in-One Plus model)

4. Flash to Flash (only available with All- in-One Plus model)

4.1. Copy File……………………………...………………….……….......7

4.2. Copy Disk Data……………………………...………………………..7

4.3. Copy All Disk……………………………...………………………......7

5. Utility

5.1. Disc Information……………………………...……………………….7

5.2. Drive Information……………………………...…………………........7

5.3. System Information……………………………...………………........8

5.4. Update BIos……………………………...………………….…………8

5.5. HDD Manager……………………………...………………….………8

5.5.1. Select Image……………………………...……………….……………..……….8

5.5.2. Disc => Image……………………………...……………………………..……...8

5.5.3. Image Information……………………………...………………………...……....8

5.5. 4. Rename Image……………………………...………………………..………….9

5.5.5. Delete Image……………………………...…………………………..…….…....9

5.5.6. HDD Information……………………………...……………………..……….…...9

5.5.7. Format HDD……………………………...…………………………..……….......9

5.5.8. HDD Setup……………………………...………………………………………...10

6. Setup

6.1. Set Burn Speed……………………………...……………………….11

6.2. Start Up Menu……………………………...………………………...11

6.3. Auto Start……………………………...………………………...........11

6.4. Display Mode……………………………...………………………….11

6.5. Language……………………………...………………………...........12

6.6. Time Zone Setup……………………………...……………………...12

6.7. Clear setup……………………………...……………………….........12

6.8. Advanced……………………………...……………………………...12

6.8.1. Power On Time……………………………...………………………................12

6.8.2. Boot Password……………………………...……………………….................12

6.8.3. Setup Password……………………………...……………………..................13

6.8.4. Performance……………………………………………………………………...13

1

Introduction:

Features:

 Supports Disc to Disc and Flash to Disc duplication
 Supports Multi-Session and Disc Spanning
 Supports Flash to Flash and Disc to Flash duplication

(Media Mirror Plus model ONLY)

 Supports various Flash media interfaces such as USB, SD, CF and Micro

SD

 Supports high speed duplication up to 24X DVD, 52X CD and 12X Blu-ray
 Easily copy CD/ DVD/ Blu-ray/ Flash media with one duplicator machine.

Flash Media Interface:

Model: Media Mirror

Use only one of the USB, CF, SD or MS slots as the source for
duplication.

Model: Media Mirror Plus

Use only one of the USB, CF, SD or MS slots on the top row as the
source for duplication.

2

1. Disc to Disc

Press “ENT” Key.

Press “ENT” Key.

Use ▲▼ to select

and press “ENT”

1.1 Copy

It is important to make sure that your source disc is placed into the right
drive. Normally the top drive under the flash media interface is the source
drive for CD/DVD/Blu-ray disc.

Select “1.Copy”, place source disc and blank discs into the proper trays,
press “ENT” key, the system will detect the discs and show the following
information.

Once the copy process is finished, the copied discs will be ejected and the
result of copy process will show on the LCD.

1.2 Copy + Compare

This function will perform copy first and then automatically compare
between source and copied discs when the copy process is finished.

(Automatically)

1.3 Source Select

This function will allow you to select Auto, First Drive, HDD, or Port # as
the source for duplication.

3

2. Flash to Disc

2.1 Copy

This function will copy from USB or flash memory card to CD/DVD/Blu­ray disc(s). A high capacity USB or memory card with large data content
can be copied to several small capacity discs using Disc Spanning
technology.

Plug in a Flash device (ex: USB, SD, MMS…) into the proper slot as the
source and place a blank disc into one CD/DVD/BD writer drive as target
for duplication.

a. First example: A USB pen drive with 153MB data content is copied to a
CD disc.

b. Second example: A USB pen drive with 1011MB data content is copied
onto two CD discs

Press “ENT” key to start copying.
The system will detect the source and calculate how many discs will be
needed.

4