r
HDD Duplicato
User’s Guide
Version 1.0
Content
Chapter 1 - Product
1.
Features
2.
Product Overview .............................................................................
3.
Function Table .................................................................................
Introduction
..........................................................................................
3
3
4
Chapter 2 - Function
1.
Copy
2.
Compare
3.
Copy & Compare
4.
Erase
4.1 Quick Erase
4.2 Full Erase
4.3
4.4
Utility ...............................................................................................
5.
5.1
5.2 Update System
5.3 System Info.
Setup
6.
6.1 Copy Area
6.2 Skip Error
6.3 Erase
6.4 Unknown Format ........................................................................
6.5 Transfer Rate
6.6 Erase Pattern
6.7 Language
6.8
............................................................................................
..........................................................................................
DoD
DoD
Show
6.1.1
6.1.2
6.1.3 Whole
6.4.1
6.4.2
6.6.1
6.6.2
Restore
Erase
Erase
HDD Info.
..........................................................................................
System and Files
All Partitions
Master
Copy unknown
Skip unknown
ONE Byte
4MB Byte
Default
Chapter 4. Specification
Specification ........................................................................................
Introduction
.....................................................................................
.........................................................................
............................................................................
................................................................................
.............................................................................
Comp
.....................................................................
........................................................................
........................................................................
............................................................................
.............................................................................
HDD
................................................................................
..........................................................................
...........................................................................
...........................................................................
...................................................................................
.......................................................................
5
5
5
6
6
6
6
7
7
7
8
8
9
9
11
11
11
12
12
12
12
13
2
1.
Features
Chapter
1 -
Product
Introduction
●
High copy speed supports up
●
Auto power control
●
Support 2.5" and 3.5" SATA HDD, IDE HDD and SSD.
●
Support 3
files),
●
●
●
●
2.
A.
and
Support Liunx (Ext2/Ext3), NTFS, FAT.
Support
Auto detects and shows the bad sector quantity.
Light weight for easy carry (320g only).
Product
System
different
All
partitions and
System area
DoD
standard erase function.
Overview
Overview
to
protects your HDD(
duplicator
Whole
which
to
90MB/second.
mode:
HDD.
can highly increase the copy efficiency.
Quick copy mode copies only Data
only power on
quick
copy
when working).
(System
Red : Fail
Green : Pass
Yellow : Powering
and
Source port
Notes: 1-1 and multiple target HDD duplicators have same function buttons and lights, as well as the LCD
configuration. Therefore only 1-1 duplicator is shown here as example.
B.
LCD
Configuration
Time
Backward
Forward
/ OK
Confirm
Cancel / ESC
Function
(mm:ss)
Total
size
Target
Copy x1 2047M
0:11 41% 860M
HDD
(Source)
Target
port
Copy
progress
%
Copied
processed size (Target)
3
Chapter
3.
Function
1 -
Product
Table
Introduction
Function
1. Copy
2. Compare
3. Copy+Compare
Description
4. Erase
Note:
Function 6.3 can select
erase source HDD or
5. Utility
6. Setup
Copy source HDD
mode selection.
To compare data bit by bit between source and copied HDD(s).
It makes copy first and then compare copied HDD(s) with source HDD
correctness.
4.1 Quick Erase
Erase HDD’s index table only, it takes short
4.2 Full Erase
Erase the whole HDD content.
to
4.3
DoD
not
erase
Erase
HDDs three times complying with USA Department
4.4
DoD
EraseComp
Erase HDDs three times complying with USA Department
and bit by bit
5.1
Show
Shows HDD’s basic information such as HDD model name and capacity
HDD info
5.2 Update System
5.3 System Info
This function will show i
number and software
6.1 Copy Area
Setup copy mode.
6.2 Skip Error
Set
to ignore
6.3 Erase
Set
Master
to
erase source HDD or not.
6.4 Unknown Format
6.5 Transfer Rate
Select the proper transfer rate
6.6 Erase Pattern
6.7
Restore
Back
to
original manufacturer
to
target HDD(s). Refer
to
check if data is completely erased.
error
of
source HDD while copying. (0 -100 Set
Default
5.2.1
To update the system firmware via the HDD.
5.2.2
To format the HDD with a 2GB FAT partition in
quickly save firmware in the HDD.
nformation of the duplicator system, including controller model
version.
6.1.1
Set
to
6.1.2
Set
to
6.1.3 Whole
Set
to
6.3.1
Disable erase source HDD.
6.3.2
Enable erase source HDD.
6.4.1
Copy unknown area when the device can
the format.
6.4.2
Skip copy unknown area when the device can
identify the format.
from
UDMA2 to UDMA7.
6.6.1
A random character
6.6.2
A set
area.
setting.
to
function 6.Setup for 3
time to
execute this function.
of
HDD
UDMA7 is
to be
Update BIOS
Format HDD
System and files
copy source HDD's data area only.
ALL partition
copy source HDD's all partitions.
copy the whole source HDD.
Disable
Enable
Copy unknown
Skip unknown
ONE Byte
4MB Byte
of
random character
different
Defense (DoD) standard.
of
Defense (DoD) standard
to ignore
error
the fastest.
written into every byte.
to be
written into a set
copy
to
ensure
of
source HDD.)
data
order to
not
identify
not
of
4
y
y
③
1.
Copy
Chapter
2 -
Function
Introduction
It copies
you
modes please
2.
Compare
It is used
after
3.
Copy
It makes copy first and then compare copied HDD(s) with source HDD
ensure
data
from
have
duplication.
chosen correct copy mode you like
refer to
The
default
to
check if the data on source HDD is identical
&
Compare
data correctness.
source
function [6.1 Copy Area] for details.
setting
HDD
is
"System
to
and
target
Files".
HDD(s).
to
use. A
Please make sure
bout the three cop
to
target HDD(s)
to
Steps
①
of
Copy+Compare
Plug in a HDD into the source port, select function
Copy
Searching Source
Analyzing Source
Partition#1
Plug in
②
when all targets are ready,press
the target HDD(s),
Function
Copy x1
Copy
time
and %
1:00 10%
④
When copy finishes, it
shows
press
OK
the
to
confirm.
OK
to
start
copyresult.
Copy+Compare.
copy.
8000M
3000M
Total data Size
Copied data
size
Number
passed
of
Time
cop
Pass:1 Fail:0
Time 1:25
Numbe r of
failed
copy
5
Chapter
p
4.
Erase
2 -
Function
Introduction
Please choose the appropriate erase method when you like
re-use the HDDs.
4.1
Quick
The function will ONLY erase the index
HDD. It will damage the data in HDD, please make sure you have backup all
ortant data before using
im
4.2
Full
Erase
The function will erase the whole
than quick erase. It will damage the data in HDD, please make sure you
time
Function 6.3 Erase
The
default
The
function can be
about 3~4 seconds.
setting
Erase
Master is to
is
"Disable erase source HDD".
stopped
this
function.
sectors on
determine erase source HDD or not.
while processing
of
the HDD. It is the quickest way
the target HDD. It will take
to dispose
by
pressing
or
[ESC] for
to
erase
longer
have backup all important data
4.3
DoD
This is
to
data was deleted. It will damage the data in HDD, please make sure you have
backup
Steps
Showing how many HDD are ready, press
to
fully erase the HDD three times bit by bit
Erase
comply with the U.S.A. Department
all important data before using this function.
of
Erase:
DoD Erase
Erasing
Erasing 1 HDD
before
using
to
OK
1 ready
this
function.
of
Defense (DoD 5220) standard
to rewrite
start.
HDD
to
guarantee the
DoD
6
5:20
St
St
St
r
Chapter
2 -
Function
Introduction
Shows the result when finish.
Time: 1:30:09
Pass 1
4.4
DoD
Erase
Comp
Fail 0
Besides DoD erase, this function will also execute compare function to make
sure the random bit was correctly
each sector three times: the first
and the third
time
with random characters. There is one final pass
written.
time
with zeros (0x00), second
This way
of
erase is
to
erase HDD over
time
with 0xFF
to
compare
random characters by reading. It will damage the data in HDD, please make
sure you have backup all important data before using this function.
DoD EraseComp Method:
20GB
40GB
20GB
Step1. 0×00
00000000000
00000000000
00000000000
00000000000
00000000000
00000000000
00000000000
00000000000
00000000000
00000000000
00000000000
00000000000
00000000000
00000000000
00000000000
00000000000
ep2. 0×FF
FFFFFFFFFFF
FFFFFFFFFFF
FFFFFFFFFFF
FFFFFFFFFFF
FFFFFFFFFFF
FFFFFFFFFFF
FFFFFFFFFFF
FFFFFFFFFFF
FFFFFFFFFFF
FFFFFFFFFFF
FFFFFFFFFFF
FFFFFFFFFFF
FFFFFFFFFFF
FFFFFFFFFFF
FFFFFFFFFFF
FFFFFFFFFFF
ep3. Random
###########
###########
###########
###########
###########
###########
###########
###########
###########
###########
###########
###########
###########
###########
###########
###########
ep4. Compare
###########
###########
###########
###########
###########
###########
###########
###########
###########
###########
###########
###########
###########
###########
###########
###########
**The erasing time of
5.
Utility
5.1
Show
HDD
This function will
of
Show
number.
Steps
Select function.
Shows HDD
information.
Port
No.
HDD model
number
DoD Erase mode is three times longe
than Full Erase mode, and the time o
Info.
show
HDD
HDD's basic information such as HDD capacity and model
Info.:
[5.Utility]
1.Show HDD Info.
ST3060318AS
f DoD EraseComp is four times longer than
HDD capacity
7
Chapter
5.2
Update
System
2 -
Function
Introduction
You can follow the steps
Select Function
5.2.2
[Update System]
2.Format HDD
Download the BIOS from PC
HDD
HDD Enclosure
to
update system firmware:
to your HDD.
USB
PC
The purpose of thisisbecause2GBFATH
update process.
Format HDD
Do FORMAT HDD#1
Confirm ?
Plug in
HDD into duplicator,
[Update System]
1.Update BIOS
5.3
System
This function shows information
Info.
DD P
artitioncan speed up
select
function
5.2.1 to
update BIOS.
of
the duplicator includes model name and
firmware
BIOS version
8
version.
HDD Dupe 1-1
Ver:2.27.1
/
6.
Setup
6.1
Copy Area
Chapter
2 -
Function
Introduction
6.1.1
It will copy source HDD's System and Files instead
will analyze the source HDD and identify the data area
source HDD's data within the target HDD's space, the copy will be processed.
System
and
Files
[Copy Area]
Source HDD 320GB
Data : 20GB
Partition1:
90GB
30GB
90GB
Partition 1
Partition 2(Blank)
20GB
of
the whole HDD. The system
System and Files
320
GB
Target HDD 320GB
Only 20G data area will be copied, It takes 4 minutes.
The Target HDD will be exactly the same as source HDD
after copy.
90GB
20GB
Partition 1
to
Cop
areas
320GB
copy. As
y 20GB data
only!
long as
the
System and Files onlysupportsFAT,NTFSan
copy.
6.1.2
This mode will bit by bit copy all
not. The capacity
capacity.
All
Partition
of
target HDD has
[Copy Area]
ALL Partitions
dEXT2
of
the partitions no matter there is data exist or
to be
bigger than the partition required
E
XT3 for qui
ck
9
Chapter 2 - Function
Introduction
Source HDD 320GB
Data : 20GB
Partition1:
Partition2:
90GB
30GB
90GB
30GB
Partition 1
Partition 2(Blank)
20GB
Target HDD 320GB
Only 120G partition area will be copied, it takes only 20
minutes. The target HDD will be exactly the same as
source HDD after copy.
320
GB
90GB
30GB
Partitio n 2(Blank)
6.1.3 Whole
It is
to
copy the whole source HDD, no matter
empty space. This mode will take much more
completely.
HDD
20GB
Copy
120GB
Partitio n 1
320GB
of
the content, format, partition or
time to
duplicate the source HDD
Parti
tion area
[Copy Area]
Source HDD 320GB
Data : 20GB
Partition1: 90GB
Partition2:
30GB
90GB
30GB
After
PC for further
20GB
Partition 1
Partition 2(Blank)
copy, the remaining
GB
320
partitioning.
Whole
Target HDD 320GB
Completed 320GB HDD will be copied, it takes about 70
minutes. The target HDD will be exactly the same as
source HDD after copy.
HDD
Partition 1
90GB
30GB
Partitio n 2(Blank)
spaceinthe
20GB
copied
320GB
HDD
320GB
can be used by
total
10
y
6.2
Skip
Chapter
Error
2 -
Function
Introduction
This function sets the number
[Skip Error]
If
the HDD is very critical
recommended
6.3
Erase
It is set
ou execute erase function.
Master
to
allow erase source HDD or not. Please make sure this setting before
[Erase Master]
of
error you like
0
forcontent
to
keep the Skip Error
Disable
to
skip during copy process.
correctness,itis strongly
to be
"0".
[Erase Master]
Enable
6.4 Unknown
This function allows you
6.4.1
Copy all the unknown area if device can
Copy
Format
unknown
to
select if you want
[Unknown Format]
Copy
6.4.2
Skip the unknown area if device can
Skip
unknown
Unknown
not
[Unknown Format]
to
copy the unknown format area.
not
identify the format during copy.
identify the format during copy.
Skip
Unknown
11
Chapter 2 - Function
6.5 Transfer Rate
Introduction
You can select the best transfer rate from UDMA 2 to
duplication progress. If you are
a high
UDMA mode.
failure
rate on copy or compare. It is recommended
not
confident on the HDD quality or you find
[Transfer Rate]
6.6 Erase Pattern
Select
6.6.1 ONE Byte
A random character
different
erase method.
to be
UDMA
written into every byte.
5
[Erase Pattern]
UDMA 7 for your HDD
to
slow down the
Byte
6.6.2 4MB Byte
A set
of
random character
ONE
to be
written into a set
[Erase Pattern]
4MB Byte
6.7
Language
Options for language are English and Japanese
6.7 Restore Default
Select and go back
to
the manufacturer's default
of
area.
.
setting.
12
Chapter
3.
Specification
Product Name
HDD Duplicator
Product
Targets
Number
1:1 or multiple target
HDD Interface
Display
SATA, IDE (optional with adapter)
Monochrome LCD
Control Button
Compatible HDD
4 push buttons
All major brand
of
2.5”, 3.5” SATA and IDE HDD and SATA SSD
Duplication Mode
Support Formats
1. System and Files / 2. All Partition / 3.
Support all format System and Files,
Whole
including
HDD
FAT, NTFS,
and
Linux
.
Capacity
Up
to
2TB
Power Supply
12V/3A adapter for 1-1 duplicator; 110V for multiple target duplicator.
Temperature
Humidity
Safety
Storage 5˚ C~45˚ C
Working -20˚ C~85˚ C
Storage 20%~80%
Working 5%~95%
CE, FCC, ROHS
13
Loading...