ILY DaisyChian User Manual

11.9 Setup Password

11.10 Reader Speed

11.11 Compare
Speed

11.12 CHG Bad

Master

11.13 CD Overburn

11.14 Clear Setup

12.

IMAGE

MANAGER

Allows setting or changing the password for Setup.

Allows you to set the maximum read speed of the reader

Allows you to set the maximum speed during the compare
function.

This function allows the user to replace the master at mid burn if an
error occurs from reading the master disc.

Allows copying of certain CDs that have been over burned during
its creation.

Resets all settings back to manufacturer’s default.

Contains various Hard Drive related operations. If duplicator does
not have HDD installed, the system menu will not show this function.

12.1 Select Image

12.2 Disc -> Image

12.3 Reader Speed

12.4 Image Info.

12.5 Rename Image

12.6 Delete Image

12.7 HDD Info.

12.8 Format HDD

13.

Link Setup

13.1 Set MyPosition

13.2 Start Link

13.3 Update BIOS

13.4 Synchron-BIOS

Used to select an Image file as a Source to be copied to the discs.

Used to copy a Source Disc to HDD to save as an Image file

The following function (12.2 Disc -> Image function), will allow you
to set the Reading Speed of the master source disc.

Checks the image file information and file size

This function renames the HDD image partition’s name.

Deletes an image file in HDD. If the file is selected as the source file,
you will not be able to delete it unless you go back to 12.1 to re­select the image.

Checks the information in HDD, such as the number of discs stored
on the HDD and the amount of space left in the HDD

This feature will allow you to format the HDD. However, if HDD
image was selected as the source you will not be able to format it.

This function sets the position of the tower within the chain.

Executes the linking process.

Upgrades the controller firmware to all linked towers.

Synchronizes the controller firmware of all linked towers to the
firmware of the first tower.

7