Ilve UM30DNE3EGPLP, UM15FDNS3GUPLP, UMI30NE3EGP, UM12FDNS3EGPLP, UM09FDNS3EGPLP Installation Manual

ILVE Majestic ranges are delivered to customers without the legs attached.
To avoid damaging the range and the surrounding area when attach the legs, follow these
directions:

1. Remove the range from packaging.

2. Make sure packing material is placed at a safe distance to avoid tripping hazards.
*When removing accessories, be sure to note locations of specific pieces so they can be correctly
replaced later.

3. Removegrates fromthecooktop

4. Removeburnersfromthetop

5. Removetheovendoor(s)

*Please pay attention to the oven parts and keep them in a safe location to prevent losing any pieces.

‐ Move Hook C to Hinge D as
shown in the images

Hook C

Hinge D

6.

Remove storage/warming
drawer

Remove racks and any other accessories

7.

from the interior of the oven(s)

Now that you have remove the dettachable parts and lessened the weight
of the range, lift the range off the packaging and set it on the floor

8. Tilt the range and set it down so its back is on the floor NOTE: In this step, no part of the range
should touch the floor directly and must be buffered by padding. This is to prevent damage to both
the range and the floor.

9. Attach the feet using
a phillips head screwdriver
to fasten the screws and
washers included with
the range.

10. Set the range upright. NOTE: The range can now be set on its feet directly on the floor. If the range
needs to be moved further, be sure not to drag it.

11. When the range is situated in its desired location, replace the oven door(s) and all other
accessories.