Ilve UM12FDNS3GUBLP, UM15FDNS3GUPLP, UMI30QNE3WHB, UMDI10QNS3WHP, UM12FDNS3QGC Installation Manual

EN

COOKERS
MAJESTIC

HOW TO INSTALL THE ANTI-TIP BRACKET

cod. EI33960140000EN

29/2019

HOW TO INSTALL THE ANTI-TIP BRACKET

Anti-tip bracket

- Unpack the cooker and mount the feet and
adjust the height.

- Measure the height from the oor to the top edge
of the back-cross bar (Fig. 4) and add 15mm.

Fig. 4

A child or adult can tip the range and be killed
Install the anti-tip device to the structure and/or the
range ( see pictures for details)
Engage the range to the anti-tip device as explained
in the pictures.
Re-engage the anti-tip device if the range is moved
See pictures for details
Failure to do so can result in death or serious burns to
children or adults

WARNING

- Mark the total height on the rear wall at the centre
of the cooker width. Make two holes and install
the xing bracket.

Fig. 4a

OPTION 1: wall mounted bracket
ATTENTION: check that the cooker is leaning against
the rear wall to avoid tipping.

- Adjust the height of the xing brackets based on the
measurement made as explained above. Fix them to
the oor as shown in the picture below.

Fig. 4b

OPTION 2: oor mounted bracket
ATTENTION: in this case 2 brackets are needed

After removing the drawer, or the panel under the

door, using a ashlight, verify that the anti-tip bracket

has been installed properly.