ILUMINARC Ilumipod 7 IP User Manual

IIlluum

miippoodd 77 IIPP

O

Oppttiicc

R

R

G

GBB

W

W

Quick Reference Guide

Ilumipod 7 IP Optic RGBW QRG

About this

Guide

The Ilumipod 7 IP Optic RGBW Quick Reference Guide (QRG) only
contains the product’s connection and mounting information as well as the
menu options and the DMX values.

Disclaimer

This QRG does not replace the product’s user manual. You must download
the corresponding user manual from the ILUMINARC® Web site
(www.iluminarc.com) to learn about the disclaimers, safety notes,
programming modes and technical information.

Safety Notes

DO NOT open this fixture unless instructed. It contains no user

serviceable parts.

DO NOT look at the light source when this fixture is on.
DO NOT touch the fixture when it is operating because it may be hot.
DO NOT leave any flammable material within 50 cm from this fixture

while operating or connected to the power outlet to minimize the risk of
fire.

DO NOT mount this fixture overhead without using a safety cable.
DO NOT submerge this product at more than 1 m and/or for longer than

30 minutes (IP67 rating). Regular outdoor operation is fine.

DO NOT operate this fixture if you see damage on the housing, lenses,

or cables; have the damaged parts replaced by an authorized technician
at once.

DO NOT connect this fixture to a dimmer or rheostat.
ONLY connect this fixture to a grounded and protected circuit.

What is

Included

One Ilumipod 7 IP Optic RGBW
One mounting plate
One mounting spike
One Warranty Card
One Quick Reference Guide

Features

4, 5, or 7-channel DMX RGBW LED wash light
Operating modes:

4-channel: RGBW control
5-channel: RGBW, dimmer
7-channel: RGBW, dimmer, color macros, strobe

High power 1 W (350 mA) LEDs
Static color control without DMX controller
Cast aluminum, IP67, black housing
Stainless steel, IP67 gland nuts
Impact resistant glass lens cover

Options

Ilumicode controller (for fixture configuration)
Ilumicon controller (for operation without a DMX controller)

Ordering

18 lenses Order Number: 11007008

2

Ilumipod 7 IP Optic RGBW QRG

Mounting

Before mounting this product, read the safety notes at the beginning of the
Ilumipod 7 IP Optic RGBW User Manual and follow the mounting
procedures indicated in it.

This product comes with a plate to mount it on any firm, non-flammable
surface, whether horizontally or vertically, on the floor or overhead. The
articulated arm that connects the light to the base is adjustable and it can
swivel, thus providing full angle control.

A spike is included for mounting this product on soil (gardens and large
flowerpots).

Mounting Diagram

AC Power

This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.

Power Wiring

You can connect the bare-ended IP67 rated power cable from the fixture to
an IP67 junction box, as shown below. Make sure to use IP67 rated conduit
or direct buried cable (DBC) to link the junction boxes.

AC Power Junction

Box Wiring

Floor Mount

Overhead Mount

3