The Ilumiline 21g2 IP Optic WW User Manual Rev. 2 covers the description, safety
Ilumiline 21g2 IP
User
The ILUMINARC® logo, the ILUMINARC® name and all other trademarks in this document
related to services or products by ILUMINARC® are trademarks owned or licensed by
product names, logos, brands,
names, trademarks featured or referred to within this document are the property of
The entire content of this document, except where applicable and unless otherwise noted, is
for professional
sage, copy, storage,
distribution, modification, or printing of this manual or its content for any other purpose
sided.
If using A4 paper (210 x 297 mm), configure your printer to scale the content of this
, and/or maintaining the
should read all of both the guide that shipped with it and this
s manual is accurate in all
respects. However, ILUMINARC® assumes no responsibility for any error or omissions in
ation of ILUMINARC® to notify any
person or company of such revision or changes. This does not constitute in any way a
supersedes all previous versions of this
electronic format, and replace them with this version.
Author
Date
Editor
Date
D. Couppe
5/1/15
Edition Notes
precautions, installation, programming, operation, and maintenance of the
Optic WW. ILUMINARC® released this edition of the Ilumiline 21g2 IP Optic WW
Manual Rev. 2 in May 2015.
Trademarks
ILUMINARC®, its affiliates or subsidiaries. Any other
company
their respective trademark holders.
Copyright Notice
solely owned by ILUMINARC®, a wholly o wne d trademark of Chauvet & Sons, Inc.
All rights reserved.
Electronically published by ILUMINARC® in the United States of America.
Manual Usage
ILUMINARC® authorizes its custo mers to download and print this manual
information purposes only. ILUMINARC® expressly prohibits the u
without its written consent.
Document Printing
For better results, print this document in color, on letter size paper (8.5 x 11 in), double-
document to A4 paper.
Intended Audience
Any person in charge of installing, operating
Ilumiline 21g2 IP Optic W W
User Manual before installing, operating, or maintaining this product.
Disclaimer
ILUMINARC® believes that the information contained in thi
this docu ment. ILUMINARC® res erves the r ight to r evise this document a nd to make changes
from time to t ime in the content her eof without obli g
commitment b y ILUMIN ARC® to make such cha nges. IL UMINARC® may issue a revision
of this manual or a new edition of it to incorporate such changes.
Document Revision
The Ilumiline 2 1g2 IP Op tic WW User Manual Rev. 2
manual. Ple ase di scard any old er versi ons of thi s manua l yo u may ha ve, whet her in p rinte d or
What Is In The Box .................................................................................................................................. 1
Text Conventions ..................................................................................................................................... 1
Personal Safety ................................................................................................................................................2
Mounting and Installation .................................................................................................................................2
Power and Wiring .............................................................................................................................................2
Features ................................................................................................................................................... 3
AC Power ................................................................................................................................................. 7
Power Consumption .........................................................................................................................................7
AC Plug ............................................................................................................................................................7
Power Wiring ....................................................................................................................................................7
Signal Wiring ....................................................................................................................................................8
Control Options ...................................................................................................................................... 11
Reset to Factory Settings ............................................................................................................................... 12
Menu Map .............................................................................................................................................. 12
LED Disclaimer ...................................................................................................................................... 16
LED Life ......................................................................................................................................................... 16
LED Binning ................................................................................................................................................... 16
Color Rendering Index (CRI) .......................................................................................................................... 16
A range of menu values fr om which to choose in a me nu
Yes/No
A set of two mutually exclusive menu options in a menu
ON
A unique value to enter or select in a menu
Introduction
Critical
installation,
operation information.
Failure to comply with this
information may render the
product partially or
completely inoperative,
damage third-party
equipment, or cause harm
to the user.
information. Failure to
comply with this
information may prevent
the product from
functioning correctly.
refers to the USITT
DMX512-A transmission
protocol.
configuration, or
Important
installation or
configuration
Useful
information.
The term “DMX”
used throughout
this document
What Is In The Box
• Ilumiline 21g2 IP Optic WW
• Warranty Card
• Quick Reference Guide
Unpacking Instructi ons
Immediately upon receiving a product from ILUMINARC®, carefully unpack the carton.
Check the contents of the box to ensure that all parts are present and that they are in good
condition.
Claims
The carrier is responsible for any damage incurred during shipping. If the received
merchandise appears to have b een damaged during shipping, the custo mer must submit the
damage report and any related claims to the carrier, not ILUMINARC®. The customer must
submit the report upon receipt of the damaged merchandise. Failure to do so in a timely
manner may invalidate the customer’s claim with the carrier.
For other issues such as missing components or parts, damage not related to shipping, or
concealed damage, the customer must make claims to ILUMINARC® within 7 days of
receiving the merchandise.
Text Conventions
Ilumiline 21g2 IP Optic WW User Manual Rev. 2 1
Support.
Introduction
There are no
user-serviceable
parts inside this
product. Any reference to
servicing you may find in
this User Manual will only
apply to properly certified
ILUMINARC® technicians.
Do not open the housing
or attempt any repairs
unless you are certified to
do so.
regulations for the proper
installation of this product.
product to another user,
make sure that they also
receive this manual.
Optic WW may require
service, please contact
ILUMINARC® Technical
Please refer to all
applicable local
codes and
Keep this manual
for future
consultation. If
you sell this
In the unlikely
event that your
Ilumiline 21g2 IP
Safety Notes
Please read all the following Safety Notes carefully because they include important
information on how to install, use, and ma i ntain this product safely.
Personal Safety
• Avoid direct eye exposure to the light source while the product is on.
• Always disconnect this product from its power source before servicing.
• Always connect this product to a grounded circuit to avoid the risk of electrocution.
• Do not touch this produc t’s housing when operating because it may be very hot.
Mounting and Installation
• This product is for outdoor use and can be submerged (IP67). However, do not
submerge deeper than 1 m for more than 30 minutes.
• CAUTION: When transferring product from extreme temperature environments, (e.g.
cold truck to warm humid ballroom) condensation may form on the internal electronics
of the product. To avoid causing a failure, allow product to fully acclimate to the
surrounding environment before connecting it to power.
• Make sure there are no flammable materials close to this product while it is operating.
• When hanging this product, always secure it to a fastening device using a safety cable.
Power and Wiring
• Always make sure that yo u are connec t ing this product to the proper volt age, as per the
specifications in this manual or on the product’s sticker.
• Never connect this product to a dimmer pack.
• Make sure that the power input cable is not cracked, crimped, or damaged.
• Never disconnect this product by pulling or tugging on the power input cable.
Operation
• The maximum ambient temperature is 113° F (45° C). Do not operate this product at a
higher temperature.
•In case of a serious operating problem, stop using this product immediately!
2 Ilumiline 21g2 IP Optic WW User Manual Rev. 2
2. Product Description
The Ilumiline 21g2 IP Optic WW is a linear wash product that may be used to light a var iety
of both indoor and outdoor applications.
The Ilumiline 21g2 IP Optic WW consists of the main housing and two surface mounting
brackets. The DMX input and output is located on rear of the product.
Features
• Operating modes:
1-channel: Dimmer
• Five distinct dimming curves
• Adjustable bracket
• Humidity-controlling GORE® valve
• Impact-resistant glass lens cover
• Cast aluminum, IP67 housing
Options
• Ilumicode Addresser (for product configuration)
Product Description
Ilumiline 21g2 IP Optic WW User Manual Rev. 2 3
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.