ILuminar ILUM-DE-N1K, ILUM-DE-1K277, ILUM-DE-N1K34, ILUM-DE-N1K-NL, ILUM-DE-1K277-NL User Manual
...
1000W
USER
MANUAL
DE HPS MH FIXTURE MODEL 1000W
120V/240V, 277V, 347V
ILUM-DE-N1K
ILUM-DE-1K277
ILUM-DE-N1K34
ILUM-DE-N1K-NL
ILUM-DE-1K277-NL
ILUM-DE-N1K34-NL
877-540-5588
iluminarlighting.com
sales@iluminarlighting.com
THANK YOU for purchasing an ILUMINAR Lighting DE FIXTURE. We strive to deliver the best
customer service alongside world-class products and we go above and beyond to make sure you are
satisfied with your purchase. The following is a general set of warnings and basic guidelines for the
ILUMINAR DE Fixture. Always have an expert install your product(s).
1000W
DE FIXTURE
VOLTAGE:
120V/240V
277V
347V
MH / HPS
SKU WITH LAMP:
ILUM-DE-N1K
ILUM-DE-1K277
ILUM-DE-N1K34
3
SKU NO LAMP INCLUDED:
ILUM-DE-N1K-NL
ILUM-DE-1K277-NL
ILUM-DE-N1K34-NL
KEEP ORIGINAL PACKAGING
In the event of a return, products will need to be in the original ILUMINAR packaging to avoid product
damage during shipping. Any damage to products not in their original packaging will not be covered
under the Warranty. Visit iluminarlighting.com/warranty for more detailed information.
SAFETY 1ST
FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN ELECTRICAL SHOCK AND
SERIOUS INJURY. Additionally, failure to follow these safety warnings can/will result in a void of all
warranties as well as any manufacturer liability.
Please read carefully prior to beginning installation.
WARNINGS
Make sure the power cord is correctly connected and the lamp is securely in place.
Disconnect the fixture from the power supply prior moving the unit or performing any maintenance or
lamp changes.
DO NOT open the ballast case, it will void the warranty.
DO NOT support the ballast by power cord(s). These cords/connections are not designed to bear weight.
DO NOT make contact with the interior of the socket while power is on.
DO NOT attempt to rewire, alter, modify or reconfigure your system - this will void the ILUMINAR
warranty and could create serious safety hazards, or cause bodily injury or death, as this is a high
amperage and voltage device.
DO NOT submerge in water.
DO NOT plug the system into untested or unidentified voltage other than what is designated on ballast.
DO NOT CONNECT A HPS/MH BALLAST to a Flip Box. It will void the warranty and can cause electrical
failure within the HPS/MH Ballast. Flip or Switch Boxes are not recommended for any HPS/MH Units or for
any high wattage ballasts.
DO NOT plug or unplug the lamp cord while the ballast is connected to power.
Make sure to wear proper gloves to protect from the transfer of oil from the skin to the lamps glass
surface.
When changing out the lamp, make sure that the lamp has time to cool before touching.
Make sure the lamp is correctly locked into the socket, properly securing the lamp.
If the lamp is damaged in any way (cracked, loose internal connections) replace the lamp immediately.
Keep away from Children. This product contains delicate electronic components. If it is placed near
an object that transmits radio signals, it could cause interference (i.e.: mobile devices, walkie talkies,
CB radios, remote controls and microwaves). If interference occurs, move such objects away from the
appliance.
SPECIFICATIONS 120V 240V 277V 347V
Input Current
Input Power
Rated Main Voltage
Voltage Range
THD
Controller
Min Power Factor
Crest Factor
Input Connection
Input Frequency
BTU Output
Relative Humidity
Operation Temp.
Recommended Lamp
Lamp Included
Lamp Base
PPF
Weight
Standalone Coverage
Mounting Height
Fixture Width
Fixture Height
Ballast Width
Ballast Height
9.30A
1085W
120V
108-264V
4.60A
1055W
240V
IP67 Wieland Plug
48 - 63Hz
4,400 btu
25-70% (Non-condensing)
0 - 35°C / 32-95°F
1000W DE 400V
ILUMINAR
K12 x 30s
2100 µmol/s
6.2kg / 13.66lbs
1.2m / 4'
9.80" / 249mm
23.98” / 609mm
7.04” / 179mm
5.1” / 130.5mm
3.85A
1045W
277V
249-305V
<10%
0 -10V
>.99
<1.7
5'x4'
3.07A
1040W
347V
312-382V
Recommended to use with ILUMINAR Touch or ILUMINAR HASH Controller.
PROTECTIONS
Microprocessor Driven
End of Lamp Life (EOL)
Open Circuit Protection
Ignition Failure Protection
Thermal Sensing Protection
iluminarlighting.com
Toll Free: 1-877-540-5588
DE HPS SPECTRUM
View MH Compatible Lamp Spectra at iluminarlighting.com
DIMENSIONS
249mm / 9.80”
275mm / 10.82”
179mm / 7.04”
320mm / 12.5”
270mm / 10.6”
249mm / 9.80”
390mm / 15.3”
MOUNTING & COVERAGE
1.2m / 4'
1.5m / 5'
© Copyright 2020 ILUMINAR Lighting
Subject to change without notice.
609mm / 23.98”
1.2m / 4'
2
© Copyright 2020, ILUMINAR Lighting
Subject to change without notice.
© Copyright 2020, ILUMINAR Lighting
Subject to change without notice.
Loading...