3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com
216
®
Polypropylene Film
Capacitors for Power
Semiconductor Circuits
PPA
Operating Temperature
Range
Capacitance Tolerance +/- 10% at 1kHz, 20˚C
Dissipation Factor
(max) at 20˚C.
Insulation Resistance
@20˚C(<70% RH)
for 1 minute at 100VDC
Dielectric Strength 200% of rated VDC for 10 seconds at 20°C between leads
3KV at 60Hz for 60 seconds between leads and case.
Self inductance <1nH/mm of body length and lead wire length.
Capacitance drift <1.0% up to 40˚C after 2 years
Temperature Coefficient -200ppm/˚C +/- 100ppm/˚C
Life Expectancy ≥30000 hours @VAC at 70°C
Capacitance change (typical) -3%
≥100,000 hours @WVDC at 70°C
Failure rate 300/billion component hours
Dielectric Polypropylene
Electrodes Vacuum deposited metal layers
Construction Extended double metallized carrier film with internal series
connections and metallized film
Leads Tinned copper leads.
Coating Flame retardant polyester tape wrap (UL510)
with epoxy end seals (UL94 V-0)
700 850 1000 1200 1500 2000 2500 3000
1000 1200 1400 1600 2000 2400 3000 3500
380 450 480 500 575 630 700 750
VDC
SVDC
VAC
Rated Voltage
-40˚C to +85˚C
> 30,000MΩ x µF. Not to exceed 30,000MΩ
• Snubber Capacitor for Energy Conversion
in Power semiconductor Circuits
• SMPS
• Induction heaters
•
High Voltage
• High current
• High Pulse Current Applications
Freq (kHz)
C≤1µF
C>1µF
1 .05% .06%