Iliving ILG8F20 User Manual

20" HIGH VELOCITY FAN

Model: ILG8F20

OWNER'S MANUAL

PLEASE READ AND SAVE

THESE INSTRUCTIONS

Read Instruction manual carefully before assembling or installing your
fan. It is important that you observe all safety information to help
prevent personal injury and/or property damage.

20” HIGH VELOCITY FAN
MODEL NO. ：ILG8F20
Voltage Rating: 120VAC 60Hz
Power：165W

CAUTION: Read and follow all instructions before operating fan. Do

not use fan if any part is damaged or missing.

WARNING: To reduce the risk of fire or electrical shock, DO NOT use
this fan with any solid state speed control device. This appliance has a
3-prong grounded plug that must be inserted into a matching outlet.
To reduce the risk of electrical shock, this grounding plug must not be
removed from the plug. Where a two-prong wall outlet is encountered,
it must be replaced: contact a qualified electrician. DO NOT attempt to
remove this safety feature. Use your fan only with adequate wiring
that is up to Code. Connect to properly grounded outlets only.

INSTRUCTIONS FOR SAFE OPERATIONS

This product employs overload protection (fuse). A blown fuse
indicates an overload or short-circuit situation. If the fuse blows,
unplug the product from the outlet. Replace the fuse as per the user
servicing instructions (follow product marking for proper fuse rating)
and check the product. If the replacement fuse blows, a short-circuit
may be present and the product should be discarded or returned to an
authorized service facility for examination and/or repair.

● Always unplug unit for cleaning.

● Always unplug unit when not in use.

● Always unplug when moving unit from one location to another.

● Do not place foreign objects through guard when fan is in

operation.

● Do not operate without fan guards properly locked.

● Do not use this fan with an extension cord.

● Do not use this fan near windows. Rain and moisture may create

an electrical hazard.

● Do not place fan or fan parts near an open flame, cooking or other
heating appliance.

● Do not operate this unit with a damaged cord or plug, especially
when this unit has previously malfunctioned, or been dropped or
damaged.

● Make sure fan is on a stable, flat surface when in operation.

● Close supervision is necessary when this unit is used by or near

children.

UNPACK YOUR FAN AND CHECK THE CONTENTS

● Fan Head With Two Screws &Two Adjustment Knobs

● Supporting Stand

● Wall Bracket

● Instruction Manual

ASSEMBLY INSTRUCTIONS

1. Please put the fan on a flat and stable surface as shown in the

picture.

2. Remove the two knobs from the steel tube attached to the

fan head, save them for step 4.

3. Align the hole in the stand with the hole in the steel tube

attached to the fan head.

4. Carefully insert the knobs from step 2 into the holes and tight

them. Please be sure to re-tighten the adjustment knobs to
avoid swaying of the fan head.