iLive S809B Reference

V:1404-0603-09

PAIRING THE WIRELESS SPEAKERS WITH THE BASE STATION

What does it mean to Pair?

Pairing the base station with a wireless speaker allows the
base station to recognize that wireless speaker. Once paired,
the base station will remember that wireless speaker and
transmit audio through it.

Link Indicators

Off

Powered off.

Slow Flashes

Standby mode.

Quick Flashes

Attempting to pair.

Solid Light

Paired and playing.

If the base station is not playing audio, either from the dock
for iPod or the Auxiliary input, then both the base station and
wireless speakers will go into Standby mode. Once you begin
playing audio from the base station, both the base station and
wireless speaker will come out of Standby mode.

Transmission Range

Once the base station is paired with a wireless speaker, the
wireless speaker can be moved approximately 200ft (line-of­sight) or 90ft (indoors) and still receive audio from the base
station.

Results will vary depending on the number and size of
obstructions between the base station and the wireless speaker.

How many speakers can I pair to one base station?

Up to 20 wireless speakers can be paired with one base
station. Additional speakers are sold separately.

Pairing

The two wireless speakers included in the same box as the base
station are pre-paired with that base station. Any additional
speakers will need to be paired by following the directions
below.

When pairing the base station with a wireless speaker you will
need to press the Pair button on the base station and wireless
speaker simultaneously. Because of this, you will need to have
both the base station and wireless speaker within reach when
you pair them.

1. Plug the base station into a power source, and press the
Power button to power the base station on.

The base station Link Indicator will ash when the base
station is powered on.

2. Plug the wireless speaker into a power source or insert 6
D batteries, not included, and press the Power button to
power the wireless speaker on.

The wireless speaker Link Indicator will ash when the
wireless speaker is powered on.

3. Adjust the Volume on the wireless speaker to
approximately the half-way point between min. and max
volume.

4. Simultaneously press and hold the Pair button on the base
station and the Pair button on the wireless speaker for 5
seconds.

5. The wireless speaker will emit a long beep when it is
paired with the base station.

If the wireless speaker emits short repeating beeps, it was
not able to pair with the base station. Repeat steps 1-4
until you hear the long beep.

After pairing, the wireless speaker may take up to 30 seconds
to begin playing audio from the paired base station.

Repeat steps 1-4 for each additional wireless speaker you want
to pair with the base station.

IS809B - Click to View the Full User’s Guide

IS819B - Click to View the Full User’s Guide

S809B - Click to View the Full User’s Guide

CUSTOMER HELPLINE | 1-314-621-2881 iLive | IS809B / IS819B / S809B