iLive IT319 User Manual

Download

USER’S GUIDE

V:1425-0119-10

IT319

3.1 Channel Home Theater System with Dock for iPod

For the most up-to-date version of this User’s Guide, go to www.ilive.net

WARNINGS AND PRECAUTIONS

• CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

• WARNING: To prevent re or shock hazards, do not expose this unit to rain or moisture.

• CAUTION: Use of controls or adjustments or performance of procedures other than those specied may result in hazardous radiation exposure.

• WARNING: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• WARNING: Do not place the unit on top of any soft, porous, or sensitive surfaces to avoid damaging the surface. Use a protective barrier between the unit and surface to protect the surface.

• WARNING: Use of this unit near uorescent lighting may cause interference regarding use of the remote. If the unit is displaying erratic behavior move away from any uorescent lighting, as it may be the cause.

• CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

• PRÉCAUTION: Danger d’explosion si les piles sont remplacées de façon incorrect. Remplacer les piles seulement par le même type de pile ou l’équivalent.

• WARNING: There is a danger of explosion if you attempt to charge standard Alkaline batteries in the unit. Only use rechargeable NiMH batteries.

• WARNING: The remote control’s button cell battery contains mercury. Do not put in the trash, instead recycle or dispose of as hazardous waste

• WARNING: Lithium ion batteries, like all rechargeable batteries are recyclable and should be recycled or disposed of in normal household waste. Contact your local government for disposal or recycling practices in your area. They should never be incinerated since they might explode.

Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.

No mezcle baterías viejas y nuevas. No mezcle baterías alcalinas, estándar (carbono-zinc) o recargables (nicad, ni-mh, etc.).

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

This product utilizes a Class 1 laser to read Compact Discs. This laser Compact Disc Player is equipped with safety switches to avoid exposure when the CD door is open and the safety interlocks are defeated. Invisible laser radiation is present when the CD Player’s lid is open and the system’s interlock has failed or been defeated. It is very important that you avoid direct exposure to the laser beam at all times. Please do not attempt to defeat or bypass the safety switches.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these Instructions.

2. Keep these Instructions.

3. Heed all Warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliers) that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specied by the

manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

iLive | IT319B2

Additional Warnings Features

• The apparatus shall not be exposed to dripping or splashing and that no objects lled with liquids, such as vases, shall be placed on apparatus.

L'appareil ne doit pas être exposé aux écoulements ou aux écla-

boussures et aucun objet ne contenant de liquide, tel qu'un vase, ne doit être placé sur l'objet.

• Main plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected form the mains socket outlet completely.

La prise du secteur ne doit pas être obstruée ou doit être facile-

ment accessible pendant son utilisation. Pour être complètement déconnecté de l'alimentation d'entrée, la prise doit être débranchée du secteur.

• Battery shall not be exposed to excessive heat such as sunshine, re or the like.

Les piles ne doivent pas être exposées à de forte chaleur, tel qu'à

la lumière du soleil, au feu ou autres choses de semblable.

• Caution marking is located at the bottom of apparatus.

Les précautions d'emploi sont inscrites en bas de l'appareil.

• The marking information is located at the bottom of apparatus.

Les marquages sont inscrits en bas de l'appareil.

• Dock plays and charges iPod

• HDMI DVD player upconverts to 1080p

• 3.1 channel speaker system with integrated subwoofer

• AM/FM radio with digital tuning

• SRS TruSurround XT™

• Motorized iPod docking drawer

• Remote

• 2 Composite video inputs

• 3 RCA stereo inputs

• Subwoofer output

• Component output

• S-Video output

• Composite video output

• HDMI output

• Disc compatibility: DVD, DVD±R/RW, CD, CD-R/RW, JPEG

• Preset EQ settings, electronic volume, treble, and bass controls

• Wall mountable

• Slot-load disc drive with anti-skip function

• Station memory presets and last channel memory

• Digital clock with timer function

• 32” wide

• AC power: built-in AC cord

What’s Included

FCC Warnings

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

• IT319

• AM Loop Antenna

• FM Wire Antenna

• Wall-mount hardware

• Remote & 2 AAA batteries

• Documentation

Powering the Unit

Plug the attached AC power cable into a standard AC power outlet.

Powering the Remote

The remote control requires 2 AAA batteries (included).

CUSTOMER HELPLINE | 1-314-621-2881 iLive | IT319B 3

INTRODUCTION

Motorized Dock for iPod

Power

Press to turn the unit off and on.

Volume Button

Press to adjust the volume the unit.

Source

Press to switch between DVD, iPod, AM radio, FM radio, Aux, AV 1, and AV 2 mode.

Tuning & Skip Buttons

Press to skip tracks on a docked iPod or loaded CD, skip chapters on a loaded DVD, or tune the radio.

Eject Button

Press to eject a CD or DVD in DVD mode, or the motorized iPod dock in iPod mode.

HDMI Output (DVD only)

Use to connect the unit to a high denition display.

FM & AM Antenna Inputs

Use to connect an FM and AM antenna to the unit.

S-Video Output (DVD or iPod)

Use to connect the unit to a display using an S-Video cable.

DVD/CD Slot-Load Drive

Timer

Press to set the “on” and “off” timer for the unit.

Play/Pause Button

Press to play and pause a docked iPod or loaded CD/DVD.

Stop Button

Press to stop a CD or DVD during play.

Wall-mount Connections

Stereo Auxiliary Input

Use to connect an MP3 player or other audio source to the unit.

Reset

Press to reset the unit to it’s original default settings.

AUX INPUT

SUB

ANTENNA INPUT

Composite Video Output (DVD, iPod, or AV Inputs)

Use to connect the unit to a display using RCA video cables (not included).

COMPONENT

VIDEO

OUTPUT

Component Video Output (DVD only)

Use to connect the unit to a display using component video cables (not included).

WOOFER OUTPUT

AV 2

AV 1

VIDEO IN

Subwoofer Output

Use to connect an external subwoofer to the unit.

AV 1 & AV 2 Inputs

Use to connect a DVD player or Set-Top Box to the unit.

iLive | IT319B4

Power

Press to turn the unit off and on.

Sleep

Press repeatedly to set the sleep timer between 1-90 minutes.

Timer

Press to set the “on” and “off” timer for the unit.

Source

Press to switch between DVD, iPod, AM radio, FM radio, Aux, AV 1, and AV 2 mode.

Go To Button

Press and enter a specic time using the Number Keypad to automatically skip to that time on the loaded DVD.

POWER

SLEEP

TIMER

SOURCE

GOTO

DISPLAY

MUTE

iPod DRAWER

DVD

10+

Mute Button

Press to mute the volume of the unit.

Eject Button

Press to eject a CD or DVD in DVD mode, or the motorized iPod dock in iPod mode.

Number Keypad

Playlist Button

Press to cycle through playlists on a docked iPod.

Preset Buttons

Press to cycle through saved radio stations.

Display Button

Press to view the time when in radio, DVD, or Aux mode.

Album Buttons

Press to cycle through albums on a docked iPod.

Chapter Buttons

Press to cycle through chapters on a docked iPod.

Set Up Button

Press to enter the unit’s setup menu. (Must be in DVD Mode.)

Program

Press to program a loaded CD or DVD to play tracks or chapters in a specied order.

A-B Button

Press once to mark a starting point during a DVD. Press the button a second time to mark an ending point. After doing so the DVD will loop that section of video. Press the button a third time to cancel this function.

Press to return to the loaded DVD’s menu when in DVD Mode. Press to move backwards through a docked iPod’s menus.

ALBUM

SETUP

CHAPTER

PLAYLIST PRESET

PROG

SELECT

TUN TUN

A-B

BASSWIDE

VIDEO

SLOW

PLAY/PAUSE

TREBLE

AUDIO

LANGUAGE

MEMORY

CLEAR

REPEAT

RETURN

Memory Button

Press to save the current radio station to the unit’s memory.

Clear

Directional & Select Buttons

Press to move through a docked iPod’s menus and tune the radio. Press the Select Button to make selections on a docked iPod.

Repeat Button

Press to repeat a song, album or playlist from a docked iPod or a loaded CD or DVD.

Return

VOLUME

STOP

REV

PREVIOUS NEXT

STEP

FWD

ANGLE

SHUFF LE

ZOOM

BSU TITLE

TITLE

HDMI

Continued

CUSTOMER HELPLINE | 1-314-621-2881 iLive | IT319B 5

POWER

MUTE

iPod DRAWER

Bass Button

Press to adjust the bass of the unit. (The unit must be in Music 2.1 or Music 3.1 EQ mode.)

Wide

Press and hold to switch between 4:3LB, 4:3PS and 16:9 aspect ratio.

Video Button

Press to switch between Component or S-Video output.

Play/Pause Button

Press to play and pause a docked iPod or loaded CD/DVD.

Slow Button

Press to view a DVD movie in slow motion.

Stop Button

Press to stop a CD or DVD during play.

Step Button

Press to skip forward through a DVD one frame at a time.

Search Buttons

Press to search through an individual track on a docked iPod, CD, or chapter on a loaded DVD.

Skip Buttons

Press to skip through tracks on a docked iPod, CD, or chapters on a loaded DVD.

Zoom

Press to zoom in and out during a DVD movie.

SLEEP

TIMER

SOURCE

GOTO

ALBUM

VIDEO

PLAY/PAUSE

STOP

REV

PREVIOUS NEXT

DISPLAY

CHAPTER

SETUP

PLAYLIST PRESET

PROG

SELECT

TUN TUN

A-B

BASSWIDE

SLOW

STEP

FWD

TREBLE

LANGUAGE

ANGLE

SHUFF LE

MEMORY

CLEAR

REPEAT

RETURN

AUDIO

ZOOM

DVD

10+

VOLUME

BSU TITLE

TITLE

HDMI

Treble Button

Press to adjust the treble of the unit. (The unit must be in Music 2.1 or Music 3.1 EQ mode.)

Volume Button

Press to adjust the volume the unit.

EQ Button

Press to adjust the unit’s preset equalizer settings. (Details on Page 15)

Audio Button

Press to adjust the audio language of a loaded DVD.

Angle Button

Press to view alternate angles on a playing DVD. The Angle Button will only work with compatible DVDs.

Subtitle Button

Press to adjust the subtitle language for a loaded DVD.

Shufe Button

Press to play tracks from a CD or an iPod in a random order.

Title Button

Press to return to the title screen of a loaded DVD.

HDMI

Press to adjust the output resolution between 480i, 480p, 720p60, 1080i60, and

1080p60

Continued

iLive | IT319B6

IPOD OPERATIONS

Docking an iPod

Locate the numbered bracket that ts the iPod that will be docked.

Each included Bracket has a number on it, indicating which iPod model that bracket is compatible with. See the separate bracket chart page to identify which bracket is needed.

Press the Power Button to turn the unit on.

Press the Source Button to switch the unit to iPod mode.

Press the iPod Drawer Button to open the iPod motorized door on the unit.

Snap the bracket into place over the iPod connector in the Motorized Dock for iPod.

All Brackets will only fit one way onto the Dock.

When inserting an iPod nano (first or second generation), slide the Dock connection on the unit so that it matches the opening on the iPod nano (first or second generation).

Connect the iPod to the iPod connector inside the Motorized Dock for iPod.

Once an iPod is connected to the Motorized Dock for iPod, the unit will charge the docked iPod.

Playing an iPod

Dock an iPod onto the unit by following the “Docking an iPod” instructions.

Press the Power Button to turn the unit on.

Press the Source Button to switch the unit to iPod mode.

Advanced features

Directional & Select Buttons (on remote)

Press to move through a docked iPod’s menus. Press the Select Button to make selections on a docked iPod.

Repeat Button (on remote)

Press to repeat a song, album or playlist from a docked iPod.

Playlist Button (on remote)

Press to cycle through playlists on a docked iPod.

Album Buttons (on remote)

Press to cycle through albums on a docked iPod.

Chapter Buttons (on remote)

Press to cycle through chapters on a docked iPod.

Menu Button (on remote)

Press to move backwards through a docked iPod’s menus.

iPod Drawer Button

Press to open the motorized dock for iPod in iPod mode.

Press the Play/Pause Button to begin playing a docked iPod.

The included remote control will allow you to access and play all of the media stored on the

Video Output from a docked iPod

A docked iPod can only output video through the S-Video Output or the Composite Video Output.

docked iPod from a distance.

To watch video from a docked iPod on a connected display, the iPod’s TV Out setting must be set to “On” or “Ask”.

CUSTOMER HELPLINE | 1-314-621-2881 iLive | IT319B 7

USING THE BUILTIN DVD/CD PLAYER

Loading a CD or DVD

IMPORTANT: The CD or DVD must be loaded with the label side facing in the same direction as the front of the unit.

Playing a CD or DVD

The unit must be connected to an external display before viewing a DVD.

Press the Power Button to turn the unit on.

Press the Source Button to switch to DVD Mode.

Load a CD or DVD into the unit.

Press the Play/Pause Button to play the loaded CD or DVD.

Video Output from a loaded DVD

Video can be output from a loaded DVD using any of the available video outputs on the unit. (Composite, S-Video, Component, or HDMI)

Connect the bar speaker to the display using the desired video output that has a corresponding input on the display.

Press the Source Button to switch to DVD Mode.

Load a DVD into the unit.

Press the Play/Pause Button to play the loaded DVD.

HDMI Output (DVD only)

Use to connect the unit to a high denition display.

S-Video Output (DVD or iPod)

Use to connect the unit to a display using an S-Video cable.

LABEL SIDE

Programming a CD or DVD

First press the Source Button to switch to DVD Mode, and load a CD or DVD into the television

Press the Program Button.

Use the Number Keypad to enter in specic titles and chapters or tracks in the order you want them to play.

Press the Directional Buttons to select the on-screen Start button to begin playing your programmed DVD.

To cancel a set program, press the Program Button, then use the Directional Buttons to select Stop then Exit.

AUX INPUT

SUB

ANTENNA INPUT

Composite Video Output (DVD, iPod, or AV Inputs)

Use to connect the unit to a display using RCA video cables (not included).

COMPONENT

VIDEO

OUTPUT

Component Video Output (DVD only)

Use to connect the unit to a display using component video cables (not included).

WOOFER OUTPUT

VIDEO IN

AV 2

AV 1

VIDEO IN

iLive | IT319B8

Advanced DVD featuresDVD Menu

To access the DVD menu, press the Setup Button (on the remote) in DVD Mode.

Go To Button

Press and enter a specic time using the Number Keypad to automatically skip to that time on the loaded DVD.

Set Up Button

Press to enter the unit’s setup menu. (Must be in DVD Mode.)

Program

Press to program a loaded CD or DVD to play tracks or chapters in a specied order.

Repeat Button

Press to repeat a song, album or playlist from a docked iPod or a loaded CD or DVD.

A-B Button

Press to return to the loaded DVD’s menu when in DVD Mode.

Video Button

Press to switch between Component or S-Video Output.

HDMI

Press to adjust the output resolution between 480i, 480p, 720p60, 1080i60, and 1080p60

Angle Button

Press to view alternate angles on a playing DVD. The Angle Button will only work with compatible DVDs.

CUSTOMER HELPLINE | 1-314-621-2881 iLive | IT319B 9

BASIC CONNECTIVITY

Below, you’ll see a basic ow chart of how you can connect your home entertainment devices to the bar speaker, and in turn how the bar speaker connects to them. The following pages contain more detailed instructions on what exactly needs to be done to make these connections.

AUDIO

VIDEOHDMI

AUDIO &/Or

VIDEO

AUDIO &/Or

VIDEO

AUDIO

DVD PLAYER

DIGITAL CABLE or SATELLITE TUNER

GAMING CONSOLE

VCR

SUBWOOFER

iLive | IT319B10

Connecting a DVD Player or VCRConnecting a Display

VIDEO IN

AV 1

VIDEO IN

You will need: a display, s-video cable or composite video cable or component video cable or a HDMI cable.

Connect the display’s video inputs to the corresponding Video Output on the bar speaker.

Power the bar speaker on and press the Source Button to switch to a compatible video out source. (DVD, iPod, AV1, or AV2)

AUX INPUT

SUB

COMPONENT

WOOFER

VIDEO

OUTPUT

ANTENNA INPUT

OUTPUT

You will need: a DVD player or VCR, composite video and RCA stereo cables.

Connect the DVD player or VCR audio and video

outputs to the corresponding Audio and Video Inputs on the bar speaker.

Power the bar speaker on and press the Source Button to switch to the connected input. (AV1 or

AV2)

Connecting a Set-top Box

You will need: a set-top box, composite video and

AV 2

RCA stereo cables

Connect the set-top box’s audio and video outputs to the corresponding Audio and Video Inputs on the bar speaker.

Power the bar speaker on and press the Source Button to switch to the connected input. (AV1 or AV2)

Connecting a Gaming Device

You will need: a gaming device, composite and RCA stereo cables.

Connect the gaming device’s audio and video

outputs to the corresponding Audio and Video Inputs on the bar speaker.

Power the bar speaker on and press the Source Button to switch to the connected input. (AV1 or

AV2)

AUX INPUT

SUB

OUTPUT

COMPONENT

VIDEO

OUTPUT

WOOFER OUTPUT

AV 2

VIDEO IN

AV 1

VIDEO IN

CUSTOMER HELPLINE | 1-314-621-2881 iLive | IT319B 11

INSTALLATION

Bar Speaker Placement

The bar speaker depends, in part, on it’s environment to help produce a realistic surround sound environment. We’ve suggested two potential placement options in the diagrams below to help you get the most out of your 3.1 Channel Music System.

Ventilation

When placing the bar speaker on an entertainment center, bookshelf, or any time of enclosed space, be sure to allow at least 2-3 inches of space around the bar speaker for ventilation. If the bar speaker is enclosed in a tight space, without ventilation, heat generated from the bar speaker could produce a potential heat hazard.

2-3 inches

iLive | IT319B12

MOUNTING THE BAR SPEAKER

Important Notes

We recommend having this bar speaker professionally mounted.

The included spacers should be used at your discretion to extend the face of the bar speaker farther from the wall. These are typically used when mounting the bar speaker under a television, and the face of the bar speaker needs to be ush with the face of the television.

Getting Started

Use the Tape Measure to decide how high you’d like to hang the bar speaker on the wall.

The bar speaker must be hung within 6 feet of an AC power outlet for the attached AC Power Cord to reach.

Use the Stud Finder to locate 2 parallel wooden studs to screw the mounting brackets into.

Mark the wall at the center of the studs using the pencil.

Line the level up on both of your marks to make sure they are level. If they’re not, adjust the marks as needed to make them level.

Required Tools

• Manual or Power Screwdriver

• Stud Finder

• Pencil

• Tape Measure

• Level

Bracket Placement on Wall

STUD

WALL

Wall Mount Brackets 

16 inches

STUD

After you’ve double checked your markings, drill through the top hole on both mounting brackets directly into the marks you’ve made on the wall.

If you are using the brackets only and no spacers, use the included short screws. If you are using any of the spacers or combination of the spacers, use the long screws.

Use the Level to level each of the hanging brackets, then drill the second screw into the bottom hole on both mounting brackets.

Slide the bar speaker onto the mounting brackets, and make sure there is a rm and stable connection before letting go of the bar speaker.

Finally, use the Level to conrm that the bar speaker is level.

Hanging the Unit

CUSTOMER HELPLINE | 1-314-621-2881 iLive | IT319B 13

BASIC OPERATIONS

Setting the Clock

IMPORTANT: This operation cannot be done from the remote.

Press the Power Button to turn the bar speaker off.

Press and hold the Timer Button, the display will begin to ash.

While holding the Timer Button, press the Tuning/Skip Buttons on the bar speaker to adjust the hour and minute of the clock.

Release the Timer Button to nish setting the clock.

Tuning the AM or FM Radio

An external AM and FM antenna are included with the bar speaker. Connect these to the AM and FM Antenna Inputs on the bottom of the unit before attempting to use the built-in radio.

Press the Power Button to turn the unit on.

Setting a Timer for the unit to Power On

IMPORTANT: This operation cannot be done from the remote.

Press the Power Button to turn the bar speaker on.

Press and hold the Timer Button until “ON” appears on the display.

While holding the Timer Button, press the Tuning/ Skip Buttons to adjust the hour and minute.

While holding the Timer Button, press the Volume Buttons to adjust the volume of the timer.

While holding the Timer Button, press the Source Buttons to adjust the source of the timer.

Release the Timer Button to nish setting the on timer. Press the Timer Button to turn the on timer on or off. “Timer On” will appear on the display when the timer is activated..

Setting a Timer for the unit to Power O

Press the Source Button to switch to AM or FM radio mode.

Press the ◄ and ► Directional Buttons on the remote to tune the radio.

You can also use the Tuning/SkipButtons on the unit to tune the radio.

Saving a Radio Station to the Unit’s Memory

After tuning to the desired AM or FM radio station, press the Memory Button (on the remote).

Press the ▲ and ▼ Directional Buttons (on the remote) to select a memory preset (ie. “P01”).

After you have chosen a memory preset, press the Memory Button to save the selected station to the selected memory preset.

To cycle through preset radio stations, press the

Preset Buttons (on the remote).

IMPORTANT: This operation cannot be done from the remote.

Press the Power Button to turn the bar speaker on.

Press and hold the Timer Button until “ON” appears on the display.

While holding the Timer Button, press the Power Button. “OFF” will appear on the display.

While holding the Timer Button, press the Tuning/ Skip Buttons to adjust the hour and minute.

Release the Timer Button to nish setting the off timer. Press the Timer Button to turn the off timer on or off. “Timer Off” will appear on the display when the off timer is activated.

Reseting the Bar Speaker

If the bar speaker is not responding correctly, try resetting it.

Using a paperclip or like object, press the Reset Button on the bottom of the bar speaker. This will restore the bar speaker to it’s default settings.

GPX | TD151014

Built-in Sound Technologies

If you press the EQ Button on the remote, you can cycle through the available sound technologies that are built into the bar speaker.

SRS TruSurround XT® creates a truly immersive surround sound experience with rich bass and clear dialog.

SRS TruSurround XT® Dialog Clarity Mode enhances

the vocals so dialog is clear and easy to understand.

SRS WOW® signicantly improves the playback quality of audio, delivering a dynamic 3D entertainment experience with deep, rich bass.

ADVANCED SOUND

Music 2.1 delivers the audio through two of the three speakers and the subwoofer.

Music 3.1 delivers the audio through all three of the bar speaker’s speakers and the subwoofer.

Connecting an External Subwoofer

Requires an RCA Audio Cable.

Plug an RCA Audio Cable into the Subwoofer Output on the bar speaker.

Connect the other end of the RCA Audio Cable into an external Subwoofer.

The connected external subwoofer will amplify the lower audio frequency output from the bar speaker.

CUSTOMER HELPLINE | 1-314-621-2881 iLive | IT319B 15

iLive IT319 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual