IB319-IB
Portable
Music System
TABLE
Warnings and Precautions 2
hllportant Safety Instructions 3
In
the Box
Powering the Unit
Docking an iPod & Playing an iPod 6
Playing a CD 6
Tuning the AM/FM Radio 7
Saving a Radio Station to the Unit's Melllory 7
Using the r\uxiliary lnput.. 7
Locations
Parts
& Service Infonllation
&F
of
OF
eatures 4
& Changing the Ren10te Battery 5
Controls & Definitions 8-15
CONTENTS
16
Warnings and Precautions
ill. A
This symbol, located on back
bottomofthe unit,isintended to alert
the user to the presence
"dangerous voltage" within the
product's enclosure that may be
sufficient magnitude to constitute a
risk
of
electric shock to persons.
or
of
uninsulated
of
This symbol, located on back or
of
bottom
the user to the presence
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
the unit,isintended to alert
of
important
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
To
reduce the riskofelectric shock, do not remove cover (or back).
There are no user-serviceable parts inside. Please refer any servicing
This product utilizes a Class 1laser
to read Compact Discs. This laser
Compact Disc Player is equipped with
safety switches to avoid exposure
when the CD door
the safety interlocks are defeated
Invisible laser radiationispresent
when the CD Player's lid
the system's interlock has failed or
been defeated.
that you avoid direct exposure to the
laser beam at all times. Please do not
attempt to defeat or bypass the safety
switches.
is
open and
It
is
very important
is
open and
to qualified service personnel.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
WARNING:
WARNING: Danger
To
,prevent fire or shock hazards, do not expose this unit to rain or moisture.
of
explosionifthe remote control's batteries are incorrectly installed. Replace only
with the same or equivalent battery.
..
CAUTION: Danger
of
explosion ifbattery is incorrectly replaced. Replace only with the same
or
equivalent type.
Precaution: Danger d'explosion
seulement
parIememe type de
si
lespiles sontremplacees de fat;on incorrect. Remplacerles piles
pileouI'equivalent.
WARNING: The remote control's button cell battery contains mercury. Do not put in the trash, instead
recycle
WARNING: Use
If
or
disposeofas hazardous waste
of
this unit near fluorescent lighting may cause interference regarding useofthe remote.
the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and,
accordance with the instructions, may cause harmful interference to radio communications. However, there
that interference will not occur
television reception, which can be determined by turning the equipment
the interference by one or more
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
• Consult the dealer
or
an experienced radio/TV technician for help.
in
a particular installation.Ifthis equipment does cause harmful interference to radio or
off
and on, the userisencouraged to try to correct
of
the following measures:
if
not installed and used in
is
is
connected.
no guarantee
15
2
ImPortant Safety Instructions
plug into
the
1.
Reod Instructions instruction should be read before the product
operated.
2.
Retain Instructions -The safety and operating
instruction should be retained for future
reference.
3.
Heed Warnings -
and
in
the operating instructions should be
adhered
to.
4.
Follow Instructions instructions should be followed.
5.
Cleaning - Unplug this product
outlet before cleaning.
or aerosol cleaners. Clean only with a dry cloth.
6. Attachments -
recommended
they may cause hazards.
7.
Water and Moisture -Donot use this product
near water - for example, near a bath tub, wash
bowl, kitchen sink, or laundry tub;
basement,
The apparatus shall not
splashing and that
such
as
vases, shall be placed on apparatus.
L 'appareil ne doil pas eire expose
ecoulementsauaw:
ne contenant de liquide, lei qu 'un vare, ne doil .
eire
place
8.
Accessories·Donot
unstable cart, stand tripod, bracket, or table. The
product may fall, causing serious injury to a
child or adult, and serious damage
Use
only with a cart, stand, tripod, bracket, or
table recommended
with
the
product. Any mountingofthe
should follow the manufacturer's instructions,
and should use a mounting accessory
recommended
9.
Use only with
table specified
the
apparatus. When a cartisused, use caution
when moving
avoid injury
Seefigure:
10.
Ventilation - Slots and openingsinthe cabinet
are provided
operation
of
overheating, and these openings must not be
blocked or covered. The openings should never
be blocked
rug, 9r other similar surface. This product should
not be placed
a bookcase or rack unless proper ventilation
provided or
been adhered
11.
Power Sources - This product should be
operated only
indicated on the marking label.
sure
of
the typeofpower supply to your home,
consult yourproduct dealer or local power
company. For products intended to operate from
battery power, or other sources, refer to the
operating instruction.
12.
GroundingorPolarization - This product may
be
equipped with a polarized alternating-<:urrent
line plug (a plug having one blade wider
the
other). This plug will
only one
way.
unable to insert the plug fully into
reversing the plug.Ifthe plug should still
to
fit,
contact your electrician to replace your
obsolete outlet.
of
the
polarizes plug.
Alternate Warnings - This product
with a three-wire grounding-rype plug, a plug
having a third (grounding) pin. This plug will
only
fit
into a grounding-type power outlet. This
is
a safety feature.Ifyou are unable to insert the
All
the safety
and
All
warning on
All
Do
Do
not use attachments not
by
the product manufacturer
or
near a swimming pool, and the like.
no
objects filled with liquids,
eclaboussures et aucun objet
sur
/'ob}el.
place this product on an
by
the
by
the manufacturer.
the
cart, stand, tripod, bracket, or
by
the
manufacturer, or sold with
the
cart/apparatus combination to
from
tip-over.
for
ventilation and to ensure reliable
the product and to protectitfrom
by
placing the product on a bed, sofa,
in
a built-in installation such
the
manufacturer's instruction have
to.
from
the
rypeofpower source
Thisisa safety feature.Ifyou are
Do
not
defeat the safety purpose
the
product
operating
and
from
thc wall
not use liquid cleaners
in
a wet
be
exposedtodripping or
aux
to
the product.
manufacturer,orsold
If
you are not
fit
into the power outlet
the
outlet,
is
equipped
operating
use
as
product
as
is
than
try
fail
is
replace your obsolete outlet.
safety purpose
13.
Power-Cord Protection - Power supply cords
should
walked
against them, paying particular attention
at
where they exit from the product.
14.
Protective Attachment Plug - The product
is
overload protection. This
Instruction Manual for replacement or resetting
of
required,besure the service technician
a replacement plug specified
that
original plug.
15. OutdoorAntenna Grounding -
antenna
antenna system
some protection against voltage surges and builtup
Electrical Code, ANSIINFPA
information witb regard to proper grounding
the mast and supporting structure, grounding
the mast and supporting structure, grounding
oftbe lead-in wire
unit, sizeofgrounding conductors, location
antenna-discbarge unit, connection to grounding
electrodes, and requircments for tbe grounding
electrode.
Seefigure:
16.
Llgbtning - For added protection for this
product during a lighlning storm,
is
left unattended and unused for long periods
of
disconnect tbe antenna or cable system. This will
prevent damage
and power-line surges.
17.
Power Lines -Anoutside antenna system should
not be located
lines or otber electric light or power circuits; or
wbere
When installing
extreme care sbould be taken to keep
toucbing sucb power linesorcircuitsascontact
with tbem might be fatal.
18.
Overloading -Donot overload wall outlets,
extension cords, or integral convenience
receptacles
electric shock.
19.
Object and Liquid Entry - Never push objects
of
any kind into this product through openings
as
they may toucb dangerous voltage points
or short-out parts tbat could result
electric sbock. Never spill liquid
tbe product.
20. Servicing product yourselfas opening or removing covers
may expose you to dangerous voltage or otber
hazards. Refer all servicing
personnel.
21. Damage Requiring Service - Unplug this
product from the wall outlet
to
qualified service personnel under tbe
following conditions:
aJ
damaged,
b)
fallen into the product,
cJ
or moisture.
outlet, contact your electrician to
of
the grounding-type ping.
be
routedsothat they are not likely to be
on
or pinchedbyitems placed upon or
plugs, convenience receptacles, and point
equipped with an attachment plug having
protective device.Ifreplacementoftbe plug
bas
the
same overload protectionasthe
is
connectedtothe receiver, be sure tbe
is
static cbarges. Article 810ofthe National
time, unplugitfrom
to
in
the vicinityofoverbead power
it
can
fall
into sucb power linesorcircuits.
an
as
this can resultina riskoffire or
Do
not attempt to service this
When
the
power-supply cord orplug
If
liquid has bcen spilled, or objects bave
If
tbe product bas been exposed to rain, water
Do
not defeat the
is
a safety feature. See
by
tbe manufacturer
Ifanoutside
grounded soasto
to
an
antenna-dis~harge
tbe
tbe product duetolighlning
outside antenna system,
provide
70,
provides
or
wben
wall outlet and
in
a fire or
of
any kind on
to
qualified service
and
refer servicing
from
has
If
the product does not operate normally
d)
following the operating instructions. Adjust only
those controls that are covered
instructions
controls may result
require extensive work
to
cords
is
used
of
of
of
it
is
to restore the product
e)
in
f) When the product exhibits a distinct change
performance. this indicates a need for service.
22.
Replacement
are required,
bas used replacement parts specified
manufacturer or bave tbe same cbaracteristics
the original part. Unauthorized substitutions may
result in fire, electric shock, orother hazards.
23.
Safety Check - Upon completionofany
service or repairs to tbis product, ask tbe service
technician to perform safety cbecks to determine
that thc product
24. Wall
should
recommendedbytbe manufacturer.
25. Heat - The product should be situated away from
beat sources sucb
stovcs, or other products (including amplifiers)
that produce beat. Battery shall not be exposed
to excessive heat such
like.
Les piles ne d"ivenl
chaleur, tel
aulres chosesdesemblable.
26. Main plugisusedasdisconnect device and
should remain readily operable during intended
use.
the mains completely, tbe mains plug sbould
be disconnected
completely.
La
ou
utilisQtion. Pour etre completement deconnecle
de
debranchee
27. Excessive sound pressure from earpbones and
headphones can cause hearing loss.
Des
d'tkouteurs
des perles
28.Toprevent
plug with an extension cord, receptacle or other
outlet unless the blades can be fully inserted to
prevent blade exposure.
29.
30.
31.
RAting
located
Caution marking
apparatus.
Les
de
The marking informationislocatedatthe bottom
of
Les marquages sonl inscrits en basde/'appareil.
asanimproper adjustmentofotber
in
If
the product
any
or
In order
prise
doit erre facilement accessible
I'alimenlation d'enlree,10prise doit eire
pressions acoustiques excessives provenan/
precaulions d'emploi sonl inscriles en bas
I'appareil.
apparatus.
bas
way,
and
Parts
be
sure the service technician
isinproper operating condition.
Celling Mounting - Tbe product
be
mountedtoa wall or ceiling only
as
pas
qu'Qla lumiere du soleil, au
to
disconnect the apparatus
from
du secleur ne doit
du secteur.
ou de casques peuvent provoquer
de
I'audition.
fire
or sbock hazard, do not use tbis
Symbol
is
specific component shall be replaced
only
by
the component specified
that documentation for safety reasons.
This symbol indicates that this
product incorporates double
insulation.
label and "CAUTION MARKING" are
at
bottomofenclosure.
is
located at tbe bottom
by
damage and will often
by
a qualified technician
to
its
normal operation.
been dropped or damaged
- Wben replacement parts
radiators, beat registers,
as
sunsbine, fire, or the
eire exposees adeforle
the mains socket outlet
pas
eIre obstruee
used to indicate that a
the operating
by
the
feu
from
pend
anI son
of
by
in
as
as
au
it
in
3
In the Box
•
IB3l9
• Documentation
Detachable AC Cord
• Remote Control, Remote Battery included
{i"'r-
~
....
=-.~-
ACCORD
(I
• Brackets for iPod Players
Features
Docking Station for iPod®
Certified iPod Connector installed for iPod
docking
Recharge Circuit for iPodlmini/nano/photo/
video
Includes docking brackets to fit iPod players
•
Controls connected iPod players
Top-Load CD Player
Plays CD/CD-R Audio Tracks
Programmable Tracks
• Digital Volume
Pr~set
EQ
• Repeat Play
LCD Display with White Backlight
Built-In Dual Speakers
Jacks
Line-In Jack for otherAudio Players, 3.5mm-
type
• Headphone Jack
Full-Function Remote Control
Controls docked iPod and Player
•
Uses Button Cell Battery (CR2025), included
•
Acmc
Powered
AC: 120V Detachable AC Line Cord
DC: Uses 8-"C" size Batteries, (not included)
• Song Skip
Digital Tune AM/FM Radio
• Station Memory Presets
4
Powering the Unit
To
power the unit, plug the included AC cord into a standard AC outlet
(120V"'60Hz)
AC 120V", 60Hz
The unit can also be powered by inserting 8 C batteries into the battery
compartment.
Changing the Remote Battery
To
change the remote battery, remove the battery compartment, and
replace the battery with a CR2025 type battery.
CR2025
.
'w·
·Vl
'«
..J
'w
.0:
w
..
'Ef):
,.,
I
:>
OPEN
UPUSH
5
Docking an iPod
Step 1: Press the Open/Close Button to reveal the dock for iPod.
Step 2: Locate the numbered Bracket that fits the iPod that will be docked.
it,
• Each includedBracket has a number on
is
model that bracket
compatible with. See the separate bracket chart
indicating which iPod
page
to
identify which bracketisneeded.
Step 3: Snap the Bracket into place over the iPod connector in the dock.
Step 4: Connect the iPod to the iPod connector inside the dock.
Playing
• When the unit is
If
charge.
will not charge.
all
iPod
the unit is running on batteries,
plugged
in,
using
AC
power, the docked iPod will
DC
power, the docked iPod
Step 1: Press the Power Button to tum the unit on.
Step 2: Adjust the iPod Button to switch to iPodMode.
Step 3: Dock an iPodinto the unit.
Step 4: Press the Play/Pause Button to begin playing a docked iPod.
Playing a CD
Step 1: Press the Power Button to tum the unit on.
Step 2: Press the Source Button to switch the unit to CD Mode.
Step 3: Press the Open/Close Button to open the CD door.
Step 4: Insert a CD into the unit.
Step 5: Press the Source Button to switch to CD Mode.
Step 6: Press the Play/Pause Button to begin playing the loaded CD.
6
Loading...