iLive IAEB67B User Manual
User’s Guide for Model IAEB67B v1954-01
Volume / Skip +/-
Press to adjust volume.
Press and hold to skip tracks.
Power / Pair / Play / Pause / Speakerphone
Press and hold to power ON or OFF.
Press and hold for 9 seconds to power ON and pair Bluetooth.
Press to play or pause audio.
Press to answer incoming phone call.
Link
Press and hold on both earbuds to link to each other.
See “Linking Earbuds” on next page before attempting.
Earbud Controls
Right side shown. All controls and features are duplicated on the left earbud.
Status Indicator
Power ON / Bluetooth Paired /
Earbuds Linked
Slow ashing blue light
Pairing Bluetooth Quick ashing red / blue lights
Linking Earbuds Quick ashing red / blue lights
Low Battery Slow ashing red light
Charging Solid red light
Fully Charged Solid blue Light
Battery Charging
Initial charge time is approximately 2 hours. Charge fully before
use. The low battery indicator will ash for 1 minute, then the
unit will automatically power OFF.
1. Pull back the cover on the DC Power Input.
2. Using a Micro-USB to USB cable, connect to the USB
port of a powered on computer or USB power adaptor
(not included) to charge the unit.
3. Charge both earbuds at the same time with the included
dual Micro-USB charging cable.
DC Power Input
Microphone
Indicator LED
Bluetooth headset
Customer Support
Customer Service: 1-888-999-4215 | Email Support: prodinfo@
dpiinc.com | Email Parts: partsinfo@dpiinc.com
For Warranty Information and the most up-to-date version of
this User’s Guide, go to www.iLiveElectronics.com
To download this User’s Guide in English, Spanish, or French, or
to get answers to frequently asked questions, visit the support
section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y
francés, o para obtener respuestas a preguntas frecuentes,
visite la sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol
ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur:
www.iLiveElectronics.com
Copyright © 2017 Digital Products International (DPI, Inc.) All
other trademarks appearing herein are the property of their
respective owners. Specications are subject to change without
notice.
FCC Warnings
WARNING: Changes or modications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Additional Warnings
• WARNING: To prevent re or shock hazards, do not expose this unit to rain
or moisture.
• WARNING : Where the mains plug or appliance coupler is used as the
disconnect device, such disconnect device shall remain readily operable.
• Lithium batteries, like all rechargeable batteries, are recyclable and should be
recycled or disposed of according to state and local guidelines. They should
never be disposed of in normal household waste, and they should never be
incinerated, as they might explode. Contact your local government for disposal
or recycling practices in your area.
• This product meets and complies with all Federal regulations.
• To avoid hearing damage, make sure that the volume on your music player
is turned down before connecting your headphones. After placing headphones
in/on your ears, gradually turn up the volume until you reach a comfortable
listening level.
WARNING: This product can expose you to chemicals including
lead, which is known to the State of California to cause cancer. For
more information go to www.P65Warnings.ca.gov
Note : Certain electrical sources can cause slower performance or disconnection
from our wireless earbuds if they are nearby.
Speakerphone
1. To accept a call, press the Speakerphone button, or use
the controls on the connected phone.
2. To end a call, press the Speakerphone button, or use the
controls on the connected phone.
3. To re-dial the last dialed number, press the
Speakerphone button twice.
Pairing Bluetooth & Playing Audio
After initial pairing to a Bluetooth device, the earbuds will stay
paired unless unpaired manually by the user, or erased due to
a reset of the device. If your device should become unpaired or
you nd it is unable to connect, repeat these steps.
Note: Turn either of the earbud on. This pairing process is required
for another earbud only.
1. From o mode, press and hold the Power/Pair button
for approximately 9 seconds until the red and blue LED
light ash alternately, indicating that the earbuds are in
pairing mode. When pairing, remain within 3 feet of the
unit.
2. From your smartphone or other Bluetooth device, access
Bluetooth Settings and search for nearby devices. Select
IAEB67 when it is discovered.
3. When successfully linked, a chime will sound and a voice
prompt will announce the connection. Audio played
through the connected Bluetooth device should now be
heard through the earbuds.
4. Use the controls on the connected device to select and
begin playing audio. Use the controls on the connected
device or the earbuds to play, pause, skip, or change
volume.
Linking Earbuds
The earbuds have already been linked for your convenience.
However, if the earbuds should become unlinked or you nd
they are unable to connect, please follow these steps.
Note: Power on both earbuds. This linking process is required for
each earbud.
1. Press and hold the Link button for approximately 9
seconds until the red and blue LED light ash alternately,
indicating that the earbuds are in pairing mode.
2. When successfully linked, a chime will sound and a voice
prompt will announce the connection.
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Loading...