Protect for Today
Sustain for Tomorrow
Made
Green
Specications are subject to change without notice.
Copyright © 2017 Digital Products International (DPI, Inc.)
All other trademarks appearing herein are the property
of their respective owners.
International Support
To download this User’s Guide in English, Spanish,
or French, or to get answers to frequently asked
questions, visit the support section at:
www.iLiveElectronics.com
Para descargar este Manual del Usuario en Inglés,
Español y Francés, o para obtener respuestas a
preguntas frecuentes, visite la sección de apoyo en:
www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en Anglais,
Espagnol ou Français, ou pour obtenir des réponses
à des questions fréquemment posées, consultez la
rubrique d’assistance sur:
www.iLiveElectronics.com
FCC WARNINGS
• Warning: Changes or modications to this unit not expressly
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Contact Information
Website: www.iLiveElectronics.com
Email Support: prodinfo@dpiinc.com
Email Parts: partsinfo@dpiinc.com
Phone Support: 1-888-999-4215
Warranty
For Warranty Information and the most
up-to-date version of this User’s Guide, go to:
www.iLiveElectronics.com.
ADDITIONAL WARNINGS
• WARNING: To prevent re or shock hazards, do not expose
this unit to rain or moisture.
• WARNING : Where the mains plug or appliance coupler is
used as the disconnect device, such disconnect device shall
remain readily operable.
• Lithium batteries, like all rechargeable batteries, are
recyclable and should be recycled or disposed of according to
state and local guidelines. They should never be disposed of in
normal household waste and they should never be incinerated,
as they might explode. Contact your local government for
disposal or recycling practices in your area.
• WARNING: This product may contain chemicals known
to the State of California to cause birth defects, or other
reproductive harm (California Prop 65). Wash hands after
handling.
• This product meets and complies with all Federal regulations.
• To avoid hearing damage, make sure that the volume on
your music player is turned down before connecting your
earbuds. After placing earbuds in/on your ears, gradually turn
up the volume until you reach a comfortable listening level.
WARNING: This product can expose you to chemicals
including lead, which is known to the State of California
to cause cancer. For more information go to:
www.P65Warnings.ca.gov
Wireless Stereo Earbuds
User’s Guide for Model IAEB07 v1929-01
Overview & ControlsFeatures
• Supports Bluetooth
• Wireless range: 33 feet
• Supports prole A2DP (Advanced Audio
Distribution Prole)
• Voice prompts announce earbud operations
• Digital volume control
• Micro-USB port for battery recharge
• DC battery power: built-in rechargeable lithium
ion battery
Includes
• 3 pairs of eartips: 1 small, 1 medium, 1 large
• Micro-USB to USB charging cable
Charging the Battery
Initial charge time is approximately 2 hours. Charge
fully before use. The low battery indicator will ash for
1 minute and a voice will announce “Low Battery,” then
the unit will automatically power OFF.
• Using a Micro-USB to USB cable (included),
connect to the USB port of a powered on
computer or USB power adaptor to charge.
Power Status Indicator Light
Power ON Flashing blue light
Low Battery Flashing red light
Charging Solid Red light
Finished Charging Solid Blue light
Bluetooth Status Indicator Light
Pairing Bluetooth Flashing red and blue lights
Successfully Paired Slowly ashing blue light
Initial Bluetooth Connection
1. With the earbuds powered OFF, press and hold
until they power ON and the indicator light
begins ashing red and blue. When pairing, remain
within 3 feet of the Bluetooth device.
2. Using the controls on your Bluetooth device,
select IAEB07 in the Bluetooth Settings to pair.
If need be, refer to the user’s manual for your specic
device for more information.
3. When successfully paired, a voice will announce
“Bluetooth is connected” and the LED indicator
will begin slowly ashing blue. Audio from the
connected Bluetooth device will now be heard
through the earbuds.
4. Use the controls on the connected Bluetooth
device to select and play audio. Use the earbud
controls or the connected Bluetooth device to
play, pause, and adjust the volume level.
5. After initial pairing, press and hold
for
approximately 5 seconds. The earbuds will
power ON and automatically connect to the
Bluetooth device.
Previously Connected Devices
• The earbuds can remember multiple Bluetooth
devices and will always try to re-connect to the
last device used.
• To re-connect to a dierent device, turn o
Bluetooth on unwanted devices, then access the
Bluetooth settings menu on the device you wish
to use and select IAEB07.
Using the Speakerphone
1. To accept a call, press the button or use the
controls on the connected phone.
2. To end a call, press the
button or use the
controls on the connected phone.
3. To re-dial the last dialed number, press the
button twice.
Troubleshooting
If the earbuds should become unpaired or will not
connect normally, follow these steps in your device’s
Bluetooth Settings Menu.
1. Delete the earbuds (“Forget This Device”).
2. Turn Bluetooth OFF then ON again, and repeat the
Initial Bluetooth Connection steps.
Volume Down
Volume Up
LED Indicator inside
body of controller
Power + Pair
Press and hold until
ashing red/blue light.
Power ON/OFF
Press and hold for 5 sec.
Play / Pause /
Speakerphone
Press to play/pause audio
or answer/end a phone call.
Microphone
Loading...