Power
Indicator
Pair
Indicator
PAIR
Pair
Button
Press to
pair.
Power
Button
Press to
turn the
unit on
and o.
Line Out
Micro USB
Charging Port
LINE OUT
DC IN 5V
Power Indicator
When connected to a PC
Status Indicator
Power O No light
Charging Red light
Fully Charged
When not connected to a PC
Status Indicator
Power O No light
Power On Green light
Low Power Green ashing light
Green light
(when powered on)
Pair Indicator
Status Indicator
Searching Slowly ashing light
Pairing Mode Quickly ashing light
Paired Solid light
Charging
1. Connect the included Micro USB to
USB charging cable to the Micro
USB Charging Port port on the unit
and the USB port on a computer.
or other charging device.
The device will now charge.
Note: Initial charging time 2.5 hours.
Please charge fully before use.
Connecting
1. Connect the included 3.5 mm cable
to the Line Out port on the unit and
the Line In port on your device.
2. Press the Power Button to
power the unit on.
Note: Make sure the unit is fully charged
before use.
Pairing
1. Press the Power Button.
2. The Pair Indicator will ash slowly
when searching, then quickly to
enter pairing mode. If this does
not occur, press the Pair button.
3. Using the native controls
on your Bluetooth device,
select the “IAB13” to pair.
If your device requests a password,
enter the default password “ 0 0 0 0 ”.
Refer to the user’s manual for your
specic device for instructions on pairing
and connecting Bluetooth devices.
4. Press the Power Button to turn
o and disconnect the IAB13.
Company Information
International Support
To download this User’s Guide in English,
Spanish, or French, or to get answers to
frequently asked questions, visit the support
section at www.iLiveElectronics.com.
Para descargar este Manual del Usuario en
inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección
de apoyo en www.iLiveElectronics.com.
Pour télécharger ce guide de l’utilisateur en
anglais, espagnol ou français, ou pour obtenir
des réponses à des questions fréquemment
posées, consultez la rubrique d’assistance sur
www.iLiveElectronics.com.
Copyright © 2013 Digital Products International (DPI, Inc.) |
All other trademarks appearing herein are the property of their
respective owners. Specications are subject to change without
notice
Contact Information
Email Support: prodinfo@dpiinc.com
Email Parts: partsinfo@dpiinc.com
Phone Support: 1-888-999-4215
Website: www.iLiveElectronics.com
Warranty
For Warranty Information and the most up-todate version of this User’s Guide, go to
www.iLiveElectronics.com.
Warnings
WARNING: Changes or modications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
USER’S GUIDE
V:780-01
IAB13
Wireless Bluetooth
Receiver and Adapter
For the most up-to-date version of this User’s
Guide, go to www.iLiveElectronics.com
Loading...