iLive 600SPYTC Instruction Manual

INSTRUCTION MANUAL

FOR 60 SERIES BUILT-IN

OVEN 600SPYTC

OPEN 24

/

7

ILVE ACCESSORIES ONLINE SHOP

For a wide range of coee machines, pods, and other ILVE

accessories at the click of a button shop.ilve.com.au

SAFETY INSTRUCTIONS 2

INSTALLATION OF THE OVEN 4

Electricals 4
Respect for the environment 5
Connection to the electrical power
mains 7

INSTRUCTIONS FOR USE 8

The first time you use the oven 8
Removable Guides (if present) 8

CONTROL PANEL 9

Keypad 9

GENERAL OVEN INFORMATION 10

Error codes 10
Beeps 10
Door Lock 10
Locking the keyboard 10
Power Failure 10
Default Settings 10
F Failure Number Codes 11
Preheat and Fast Preheat 11
Timer 11

GENERAL OVEN TIPS 12

Preheating the Oven 12
Operational Suggestions 12
Utensils 12
Oven Condensation and Temperature

13

High Altitude Baking 13

GETTING STARTED 14

Instructions for initial switch-on 14

USER SETTINGS 15

Language 16
Temperature & Weight 16
Time 17
Date 17
Brightness 18
Volume 18

SYSTEM SETTING 19

Event Log 20
Demo 20

STARTING YOUR OVEN 21

Switching the oven on and off 21
Selecting the cooking mode 21
Changing the cooking mode 22
Changing temperature 22
Pre-heating phase 24
Fast Preheat 24
Using Oven Lights 25

TIME OVEN MODE OPERATION 26

Cook Time 26
Stop Time 27

SETTING THE MEAT PROBE 28

UNDERSTANDING THE VARIOUS
OVEN MODES 31

Roast Tips and Techniques 31
True Convection Tips and
Techniques 31
Convection Roast Tips and
Techniques 33
Convection Broil Tips and
Techniques 33
Broil Tips and Techniques 34
Dehydrate Tips and Techniques 34

RECIPES 36

CLASSIC PIZZA 39

Tips For A Good Pizza: 41

SABBATH MODE INSTRUCTIONS 42

OVEN CARE AND CLEANING 43

Self-Cleaning the Oven 43
Preparing the Oven for Self-Clean 43

TABLE OF CONTENTS

GB

1

IMPORTANT

The oven’s data plate is accessible even
with the oven fully installed. The plate is
visible simply by opening the door. Always
quote the details from it to identify the
appliance when ordering spare parts.

SETTING THE SELF CLEANING MODE

44

To Set the Self-Clean Mode 44
To Change the Cleaning Time 45
To Delay the Start of Cleaning 45

DOOR LOCKING SYSTEM 47

Automatic door locking during
pyrolytic cycle 47
Removing the “FULL GLASS”
panoramic door 48
How to remove the inner glass of
the “FULL GLASS” panoramic door

49

Replacement of the oven light 51

SOLVING BAKING PROBLEMS 52

SOLVING OPERATIONAL PROBLEMS

53

ASSISTANCE OR SERVICE 54

Service Data Record 54

GB

2

SAFETY INSTRUCTIONS

- Do not disassemble any parts prior to having disconnected the oven from the
mains.

- Do not use the appliance if any part is broken (for example a glass). Disconnect it
from the mains and call service.

- Before using the oven, it is recommended to make it operate at noload at the maximum
temperature for an hour to eliminate the insulating material odour.

- In all models, leave the door closed when the grill is used.

- The cooling fan may remain in operation so long as the oven is hot, even after it has
been switched off.

- During the use the appliance becomes very hot; don’t touch the heating elements

inside the oven.

- During the oven operation, the front is heated as well; consequently keep children
clear of the oven, especially during self-cleaning.

- Parents and adults should pay particular attention when using the product in presence
of children.

- Children should be overseen so as to ensure that they don’t play with the equipment.

- Keep children under age 8 away, unless constantly supervised.

- This appliance is not intended for use by persons (including children over age 8) with
reduced physical sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the appliance
by a person responsable for their safety.

- Children may not perform cleaning and maintenance unsupervised.

- In order to avoid damage to the oven enamel coat, do not cover the oven muffle sole
with any item (e.g. aluminum foil, pans and the likes).

- Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door
glass since they can scratch the surface, which may result in shattering of the glass.

- Abrasive detergents and steam cleaning equipment should not be used for cleaning.

- Before performing self-cleaning, take out all accessories (grills, dishes, pans, meat
probe) to avoid damaging them, remove large cooking residues and then close the
door, ensuring that it is closed properly.

- The oven is cool and power to the oven has been turned off before removing the door.
Failure to do so could result in electrical shock or burns.

- The appliance must not be installedbehind a decorative door in order to avoid
overheating.

- WARNING: Ensure that the appliance is switched off before replacing the lamp to avoid
the possibility of electric shock.

- Use only the meat probe supplied with the appliance.

ATTENTION
If the oven is installed in an ambient temperature below 37 °F
(3 °C), F*0117 may appear; when a higher ambient temperature
is reached, the error will no longer appear.

GB

3

Refer to the figures below for the correct placement of the grills

EMBOSSED GUIDES

REMOVABLE GUIDES

GB

4

INSTALLATION OF THE OVEN

To install the oven into the kitchen a cutout should be made in accordance with the
dimensions shown in the Cutout & Dimensions figure.
The apparatus is to be fastened to the top by means of the two screws provided in the
kit through the holes made on the oven uprights.
The cabinet in which the apparatus is installed shall be open on the back side to ensure
a sufficient air circulation and prevent overheating.

WARNING
As the apparatus is to be fitted in your kitchen furniture, make
sure that all surfaces in contact with the oven can resist a
temperature of approx 90°C.

Electricals

- Absorbed power:

oven top element:............................................. 1200+1000W 230V - 1200+1000W 240V

oven bottom element: ...................................... 1100W 230V - 1100W 240V

round element (hot air): .................................... 2300W 230V - 2300W 240V

(on some models)

roasting jack motor: ......................................... 4 W (on some models)

lamp: ................................................................ 25 W

hot air fan motor:............................................... 25 W

cooling fan motor:............................................. 25 W

- Maximum absorbed power: (see data plate).

- Supply voltage: (see data plate).

NOTE

This appliance is in compliance with following European directives:
2006/95/CE (LVD), 2004/108/CE (EMC), 2011/65/CE (RoHS),
2012/19/UE (WEEE), 2002/40/CE.

GB

5

Respect for the environment

The documentation for this appliance is printed on paper bleached without
chlorine or recycled paper to contribute to protecting the environment.
The packaging was designed to prevent damage to the environment; they
are ecological products that can be recovered or recycled.
Recycling the packing saves raw materials and reduces the volume of
industrial and domestic waste.

THE PACKING MATERIAL is 100% recyclable and marked with the recycling symbol.
Dispose of in conformity with local law. The packing material (plastic bags, polystyrene
parts, etc.) must be kept out of the reach of children because it is potentially dangerous.
THIS APPLIANCE is marked in conformity with European Directive 2012/96/UE, Waste
Electrical and Electronic Equipment (WEEE). By making sure that this product is disposed
of correctly, the user contributes to preventing potential negative consequences for the
environment and health.

THE SYMBOL on the product or accompanying documentation indicates
that this product must not be treated as domestic waste but must be
delivered to a suitable collection point for the recycling of electrical and
electronic equipment.

GB

6

Cutout & Dimensions

535

21

594

594

540

560

560

595

535

21

594

594

540

560

595

560

Dimensions are in centimeters

GB

7

Connection to the electrical power mains

WARNING

This apparatus must be earthed.

The oven is only for domestic use.
The feed voltage and the absorbed power are as indicated on the data plate attached to
the left-hand side upright, which can be seen when the oven door is open.
Connecting must be carried out by qualified personnel and in accordance with the
regulations currently in force.
The manufacturer can not be held responsible for any damages to persons or objects
caused by failure to observe these instructions.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
The oven must be connected to the mains through a multipole circuit breaker with
a contact-to-contact gap of at least 3 mm, making sure that the earth wire is not
disconnected. For connecting use a flexible cable remembering to make it long enough
to allow the oven to be removed from its housing unit when maintenance work is
required.
Such a device must be fitted to the power supply in compliance with the regulations
governing electrical installations.
The socket or switch must be easily reachable with the oven fully installed.

CABLE TYPES AND MINIMAL DIAMETERS

SASO

H05RR-F 3x1,5 mm

2

H05RR-F 3x2,5 mm

2

H05VV-F 3x1,5 mm

2

H05VV-F 3x2,5 mm

2

H05RN-F 3x1,5 mm

2

H05RN-F 3x2,5 mm

2

H05V2V2-F 3x1,5 mm

2

H05V2V2-F 3x2,5 mm

2

GB

8

INSTRUCTIONS FOR USE

The first time you use the oven

Clean the oven thoroughly with soapy water and rinse well.
Operate the oven for about 30 minutes at maximum temperature to burn off all traces of
grease which might otherwise create unpleasant smells when cooking.

WARNING
Never use aluminum foil to cover the oven racks or to line the
oven. It can cause damage to the oven liner if heat is trapped
under the foil.

WARNING
Make sure you do not force it to avoid damage to the enamel.

Removable Guides (if present)

NOTE
Always remove the removable guides before oven self-cleaning.

To remove the lateral frames from smooth-walled ovens, proceed as shown in the figure.

GB

9

CONTROL PANEL

Your appliance could vary slightly compared to the illustrations below.

A - Keypad
B - Display screen

PM

FRIDAY 11/20/2015

04:26

B

A

Keypad

To operate the key, press gently. The keypad will not work if more than one key is
pressed at the same time.

- Movement arrows

- To set the timer.

- Enter the functions menu during cooking.

- Switches the inner oven light on and off. The light cannot
be switched on during the self-cleaning cycle.

- Switches the oven on and off.

- Confirms the settings and starts cooking operations.
When pressed during a cooking operation, the function
is placed in pause. Press again to restart.

- Return to previous display page. Keep pressed to return
to Home page

GB

10

GENERAL OVEN INFORMATION

Before using your oven for the first time remove all packing and foreign materials from
the oven(s). Any material of this sort left inside may melt or burn when the appliance is
used.

Error codes

This code appears in the event of the electronic control indicating a fault. When the
error appears, the current function is blocked. If the type of error is related to a safety
function, the oven becomes unusable and every time a start attempt is made, the same
error appears (in which case call in the after-sales service), while if the error relates to
a minor fault, after being restarted the oven can be used for the functions that do not
involve the faulty part (e.g., a heating element).

Beeps

Confirms that the command has been received after a key has been pressed.
It also indicates that a time function has been completed (e.g. Timer or Timed Cooking).
During the execution of a recipe, an acoustic signal warns the user that the oven is
waiting for operation by the user (e.g., insert the dish or turn it over).
Beeps also signal an oven fault.

Door Lock

It’s displayed steadily when the door is locked. The symbol flashes when the latch is
moving in order to lock or unlock the door. Do not attempt to open the door at this time.
Door can be opened when the symbol no longer appears. A padlock appears when the
door has been locked automatically due to self-clean mode.

Power Failure

After the power returns to the oven, the door lock mechanism perform a test run then
the clock time and date are displayed .

Default Settings

The cooking modes automatically select a suitable temperature when the cooking mode
is selected, these can be changed when a different one is needed.

F Failure Number Codes

These codes are displayed when the electronic control detects a problem in the oven
or in the electronics.
The error code is recorded in the Error Log in the Setup menu. This error can be

GB

11

communicated to the service technician so he/she can understand the possible cause
of the problem in advance.

Preheat and Fast Preheat

Whenever a cooking mode is set and the oven is heating, the preheating starts, during
this period, the instantaneous temperature is displayed together with the thermometer
icon.
As soon as the 100% is reached, the control sounds an “end of preheat” tone and the
current temperature value disappears.
When it’s necessary to heat up the oven rapidly, a Fast Preheat mode is available: it
uses the heating elements and the convection fan in a special way, in order to reduce
the heating time as long as possible.
After having set one of the cooking functions for which the fast preheat is available and
set the desired temperature value touch the key, after entering the functions menu,
select the icon by means of the keys and confirm by means of the key .
As soon as the set-point temperature is reached, the control sounds a and both “Fast
Preheat Icon” and “current temperature” disappear. The oven switches automatically to
the desired cooking mode that was previously set: put the food inside now.

Timer

WARNING
The timer on your oven does not turn the appliance on or
off, its only purpose is to alert you through the buzzer. When
you want to turn off the oven automatically, use the end-of­cooking or delayed cooking function.

NOTE

Pressing the OFF button does not reset or stop the timer.

1. Press the button and set the desired time using the arrows and confirm with
the button . To switch the selection between hours and minutes use the arrows

.

2. The time can be set from 1 minute to 12 hours and 59 minutes and, when set, the
remaining time is always visible in the bottom status bar until the time expires or is
reset.

3. To change or cancel the time set, you must reset the timer by pressing and holding the
button for a few seconds.

4. Timer format is usually HR:MIN, switching into MIN:SEC during the last minute.

5. When the time expires, the display shows 00:00 and the buzzer will sound for one
minute or until the button is pressed.

GB

12

GENERAL OVEN TIPS

Preheating the Oven

- Preheat the oven when using the Bake, Convection Bake and Convection Roast
modes.

- Use Fast Preheat mode when a shorter time is desired to preheat the oven.

- Selecting a higher temperature does not shorten the preheat time.

- Preheating is necessary for good results when baking cakes, cookies, pastry and
breads.

- Preheating will help to sear roasts and seal in meat juices.

- Place oven racks in their proper position before preheating.

- During preheating, the selected cooking temperature is always displayed.

- A beep will confirm that the oven is preheated and the “detected temperature” will
turn off.

Operational Suggestions

- Do not set pans on the open oven door.

- Use the interior oven lights to view the food through the oven door window rather than
opening the door frequently.

Utensils

- Glass baking dishes absorb heat. Reduce oven temperature 25°F (15°C) when baking
in glass.

- Use pans that give the desired browning. The type of finish on the pan will help
determine the amount of browning that will occur.

- Shiny, smooth metal or light non-stick / anodized pans reflect heat, resulting in lighter,
more delicate browning. Cakes and cookies require this type of utensil.

- Dark, rough or dull pans will absorb heat resulting in a browner, crisper crust. Use this
type for pies.

- For brown, crisp crusts, use dark non-stick / anodized or dark, dull metal utensils or
glass bake ware. Insulated baking pans may increase the length of cooking time.

- Do not cook with the empty broiler pan in the oven, as this could change cooking
performance.

- Store the broil pan outside of the oven.

GB

13

Oven Condensation and Temperature

- It is normal for a certain amount of moisture to evaporate from the food during any
cooking process. The amount depends on the moisture content of the food. The
moisture may condense on any surface cooler than the inside of the oven, such as the
control panel.

- Your new oven has an electronic temperature sensor that allows maintaining an
accurate temperature. Your previous oven may have had a mechanical thermostat that
drifted gradually over time to a higher temperature. It is normal that you may need to
adjust your favorite recipes when cooking in a new oven.

High Altitude Baking

- When cooking at high altitude, recipes and cooking time will vary from the standard.

GB

14

GETTING STARTED

Instructions for initial switch-on

Once the oven has been connected to the power supply for the first time, the control
automatically prepares for setting a number of user settings, which remain stored in
case of any subsequent switch-on.

NOTE

Both at the first and subsequent connections to the power supply,
the door lock mechanism performs a calibration run – in this
phase, always keep the door closed.

- Language

- Temperature

- Time

- Date

Refer to the USER SETTING paragraph for setting instructions.

After making the user settings, the control moves automatically to the “Standby” display
page.

GB

15

USER SETTINGS

With the oven on, select the icon and confirm with the key to enter the SETTINGS
menu. This menu permits personalizing the settings of your oven. To make access, no
active cooking or any set time functions must be in progress.

NOTE

The Setting menù can never be set if any time function is already
set: first delete all the active time functions.

1. Press the keys to select the sub menu and confirm by means of the key.

2. Use this menu to change the following settings:
Press the keys or to select the setting or change a sub menu from among

the six available ones and confirm by means of the key.

12

yk

abc

SETUP

LANGUAGE

GB

16

Language

Press the arrow key to select a language from among those available, and confirm
with the key.

Temperature & Weight

Press the arrow key and to select one of the two temperature options “°C/°F”
or weight options Kg/ib and confirm with the key.

°F

°ClbKg

GB

17

Time

Press the arrow key to select the time format between the options “12h AM/PM
or 24h” and confirm with the key. Subsequently, set the time using the arrows
and confirm with the key.

Date

Press the arrow key to select the date format from among the options “D.M.Y.
– Y.M.D. – M.D.Y.” and confirm with the key. Subsequently set the value using the
arrows and confirm with the key.