Page 1
OP-1Rx
Optical Receiver
45 ~ 2600MHz
User Manual
Page 2
OP-1Rx_V3 User Manual.docx Page 2 of 6 30-Aug-2018
© 2018 IKUSI ANZ Pty Ltd - All rights reserved - Reproduction without consent is prohibited
Table of Contents
1.0 PRODUCT SUMMARY ...................................................................................................... 3
2.0 PERFORMANCE CHARACTERISTICS ................................................................................ 3
3.0 TECHNICAL PARAM ETERS ............................................................................................ 4
4.0 BLOC K DIAGRAM .......................................................................................................... 4
5.0 STRUCTURE DESCRIPTION ............................................................................................. 5
6.0 APPLICATION LIN K ........................................................................................................ 5
7.0 GUARANTEE AND REPAIR ITEMS ..................................................................................... 6
Page 3
OP-1Rx_V3 User Manual.docx Page 3 of 6 30-Aug-2018
© 2018 IKUSI ANZ Pty Ltd - All rights reserved - Reproduction without consent is prohibited
1.0 Product Summary
This product is specially developed
for the CATV and satellite direct TV transmission.
With a small footprint, compact and internal circuit structure provides excellent
performance, and is
compatible with FTTxPON technology.
FTTH and the integration of Analog TV, Digital TV (DBS-C,
DBS-T) and Satellite TV.
2.0 Performance Characteristics
◼
High linearity, suitable for Analog TV&SAT-IF application.
◼
Bandwidth: 45~2600MHZ.
◼
Simultaneously receive CATV and Sat IF signal can be compatible with
FTTxPON Technology
◼
Analog TV, Digital TV and Satellite TV have excellent performance:
Analog TV: (84CH PAL-D, OMI=3.8%, Pin=-1dBm) C/N>51dB, CTB≤ -66dB, CSO≤ -62dB;
Digital TV: (Original signal MER=38.6dB, BER<1.0E-9) Pin=-14dBm, MER≥33dB (MER
degrade 5dB), Pin=-19dBm, BER<1.0E-9；
Satellite TV: (Original signal quality =64%) Pin=-20dBm, signal quality >38%.
Page 4
OP-1Rx_V3 User Manual.docx Page 4 of 6 30-Aug-2018
© 2018 IKUSI ANZ Pty Ltd - All rights reserved - Reproduction without consent is prohibited
3.0 Technical Parameters
Item
Indexes
Remark
Min
Type
Max
Optical Characteristics
Operating Wavelength
nm
1260
1620
Responsivity
A/W
0.85
Receiving optical power
range
dBm
-7 +2
Analog TV
-14 +2
Digital TV
-20 +2
Satellite TV
Optical Return Loss
dB
50
Optical Connector Type
SC/APC
RF Characteristics
Operating Bandwidth
MHz
45
2600 Output Level
dBµV
90 @Pin=0dBm
Flatness
dB
-1.0
+1.0
45~862MHz
-2.5
+2.5
950~2600MHz
Output Return Loss
dB
14
45~862MHz
12
950~2600MHz
C/N
dB
51
@Pin= -1dBm,
CTB
dB
66
Pout>88dBµV,
84CH PAL-D,
OMI=3.8%
CSO
dB
62
HUM
dB
-60
Output Impedance
Ω 75
RF connector
F type (Male/female
selectable)
75Ω
General Characteristics
Operating Voltage (DC)
V 12
Consumption
W
≤3
Operating Temperature
℃
-20
+60 Storage Temperature
℃
-40
+85
Dimension (W)×(D)×(H)
mm
105×67×24
4.0 Block Diagram
Page 5
OP-1Rx_V3 User Manual.docx Page 5 of 6 30-Aug-2018
© 2018 IKUSI ANZ Pty Ltd - All rights reserved - Reproduction without consent is prohibited
5.0 Structure Description
Input optical power indicator description
LED color
Description
Green
Normal
Orange
Low input optical power (<-20dBm)
Red
High input optical power (>+2dBm)
6.0 Application link
Page 6
OP-1Rx_V3 User Manual.docx Page 6 of 6 30-Aug-2018
© 2018 IKUSI ANZ Pty Ltd - All rights reserved - Reproduction without consent is prohibited
7.0 Guarantee and repair items
Please note:
1. Goods presented for repair may be replaced by refurbished goods of the same type rather
than being repaired. Refurbished parts may be used to repair the goods.
2. During the process of repair, some or all of your stored data may be lost. Please ensure that
you have saved this data elsewhere prior to repair.
Contact Ikusi for any return material authorization (RMA) via sales@ikusi.com.au
or 61 3 97208000
A pre-authorized copy of RMA form must accompany all return shipments. All return goods
must be reasonably prepared for shipment, including packaging and proper boxing for small
components and/or banding for pallets, to protect them during transit. Received Damaged
Goods caused by improper packaging will not be credited. ALL Goods must be returned in its
Original Packaging and must be in Good Saleable Condition. Goods not meeting this
condition will be rejected for credit.
Loading...