IK Multimedia iRig Micro Amp Users Manual
15W battery-powered guitar amplier with iOS/
USB interface.
USER MANUAL
Contents
Table of Contents
Contents 2
English 3
Safety information 3
iRig Micro Amp 3
Register your iRig Micro Amp 4
1 Installation and setup 4
1.1 Stand-alone 4
1.2 Device connected 8
2 USB LED 10
2.1 Audio input meter and gain 10
2.2 Low battery 10
3 Specifications 11
Warranty 12
Support and more info 12
Regulatory 13
2
English
Safety information
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS.
iRig Micro Amp can ONLY be used with:
• Consumer grade non-rechargeable CARBON-ZINC batteries
• ALKALINE batteries
• Consumer grade Ni-MH rechargeable batteries
iRig Micro Amp
Thank you for purchasing iRig Micro Amp.
Your package contains:
• iRig Micro Amp
• Lightning Cable
• USB cable
• 3/8” to 5/8” screw adapter
• 6xAA batteries
• Quick Start Guide
• Registration Card
1x
1x
1x
6x
1x
iRig Micro Amp is a compact 15W 1x4” analogue amplifier with built-in MFi audio interface that allows you to
record into iOS or Mac/PC devices.
iRig Micro Amp is one of the most compact combo amplifier on the market. This makes of Micro Amp the
perfect travel companion.
The compact design is achieved, also, thanks to a quality full-range 4” driver capable of 15W power.
Micro Amp can be powered either via external PSU or via 6AA batteries: this make of Micro Amp the perfect
weapon for every on-the-go guitarist. The built-in Mfi audio interface, also, allows you to record your instrument
directly on the connect device (iOS or Mac/PC), with a resolution up to 24bit/96kHz. Micro Amp sports 3
channels: Clean, Drive and Lead. Each channel has a set of tune controls: bass, mid and treble. Also, although
it’s very compact, the 15-watt Micro Amp packs a mighty punch with huge tone.
3
English
Register your iRig Micro Amp
By registering, you can access technical support, activate your warranty and receive free JamPoints™ which will
be added to your account. JamPoints™ allow you to obtain discounts on future IK purchases! Registering also
keeps you informed of all the latest software updates and IK products.
Register at: www.ikmultimedia.com/registration
1 Installation and setup
iRig Micro Amp can work as a stand-alone practice amp, or connected via USB to an iOS device or a MAC/
PC computer. The required power supply is guaranteed by 6xAA batteries or with the (optional) PSU. When the
iRig Micro Amp is battery powered, it is capable of 7.5W RMS; when powered with the PSU its capable of 15W
RMS.
1.1 Stand-alone
1. Insert the AA batteries in the battery compartment or connect the (optional) PSU.
*
DC 9V - 15V
4
Loading...