Ikelite Nikon 5400, 6194 Instruction Manual
Digital Housing
instruction manual
for
Nikon
Coolpix 5400
Housing
#6194
Ikelite Digital Housing
Lens Port
Power
FRONT VIEW
L
id
Snap
Quick Release
B
utton
R
ubber
Handles
Tray
B
ase
Multi
Selector/
Center
Shutter
Release
Focus/
Delete
BACK VIEW
Monitor
Quick
Review
Zoom Buttons
AE/AF-L
O'ring
Menu
External TTL
Strobe Connector
Shutter
Release
Lid
Snap
Lift
Push For ward
Lid Snap Lock
TOP VIEW
External TTL
Strobe Connector
Lens Port
Function
Flash
Power
Mode
Command Dial
Exposure
Compensation
Shutter
Release
Mounting
Bolt
Mounting
Tray
Sync Cord &
Hot Shoe connector
O'Ring
External Strobe
Connection
O'ring
Housing Back
Housing Hot
Shoe Connector
Camera Hot Shoe
Camera
instruction manual
#6194 for Nikon Coolpix 5400
Congratulations on your purchase of an Ikelite Digital Camera
Housing. Ikelite has over 30 years of experience in the underwater
photographic and lighting market. Our products are designed and
built in the USA by Ikelite for both the professional and amateur
photographer.
The clear housing permits instant visual inspection of the camera
and all sealing surfaces as well as complete monitoring of controls
and camera LCD screens.
Ikelite Digital Housings are slightly negative in salt water for
stability. This housing has been water pressure tested at the
factory. Housing is pressure tested to 200’ (60m).
2
OOppeenniinngg tthhee HHoouussiinng
Lid Snaps have a
open, push Lid Snap Lock
forward and lift as shown.
Keep pressure on the Lid Snap
so it does not fly open
quickly.
lot of spring tension once
they go over center, have a
firm grip on the lid snap.
g
LLoocck
k
. To
Some lid snaps have a
3
IInnssttaalllliinngg tthhee CCaammeerra
a
Install a fully charged
into the camera
battery
before
securing the camera
to the housing’s mounting
tray.
Remove the back from the
housing. The mounting tray
for the camera is secured to
the housing back. Position
the camera
secure it with the
on the tray and
mounting
bolt which threads into the
camera's tripod socket.
CCAAUUTTIIOONN:
:
Some camera tripod socket threads
is metal.
Do not cross thread or over tighten as you may damage
the camera tripod socket threads.
FFllaasshh CCoonnnneeccttiioon
n
When using an external
strobe connect the
housings Hot Shoe
Connection, slide the
connector into the hot
shoe of the camera from
the back as shown. Slide
the connector forward
until it stops. This can be
done after the camera is
mounted to the
mounting tray.
are plastic. The mounting bolt
4
Loading...