![](/html/83/8380/838068d9614c8a35c9428370b4e8b616a9a04e30387492b0ea0bf8775230f057/bg1.png)
Product Registration
Please register your product at ikelite.com within 15 days of purchase.
Our product registration database is the best way for us to get a hold
of you in the event of a product update or recall.
Underwater Housing for
Sony Alpha A6300
Product Number 6910.63
![](/html/83/8380/838068d9614c8a35c9428370b4e8b616a9a04e30387492b0ea0bf8775230f057/bg2.png)
2
About this Product
Thank you for your purchase of Ikelite equipment. Please read this
instruction manual completely before attempting to operate or dive
with this product. Please visit ikelite.com to register your product to
receive information on any updates, notices, or recalls pertaining to
your equipment.
Included in the Box
• Housing
• Waterproof bulkhead cap
• Silicone lubricant
• Control + push button tip assortment
![](/html/83/8380/838068d9614c8a35c9428370b4e8b616a9a04e30387492b0ea0bf8775230f057/bg3.png)
3
Important Notices
» This housing requires a compatible Lens Port for waterproof
operation. The housing is not waterproof without a Lens Port
attached.
» To prevent salt build-up and sticking controls, submerge the
empty housing in clean, freshwater. Operate the controls
several times each while underwater to ush out any residue.
» Never leave a housing in a rinse tank, even if it is the only
system in the tank. Most catastrophic oods happen when the
user walks away from a housing while it is in the rinse tank.
» Do not use alcohol, cleaning agents, spray lubricants, Rain-X,
or other solvents on the housing or lens port. Use of an
incompatible chemical compound can damage the plastic and
o-rings, and may result in leaking.
![](/html/83/8380/838068d9614c8a35c9428370b4e8b616a9a04e30387492b0ea0bf8775230f057/bg4.png)
4
Contents
Product Registration 1
About this Product 2
Included in the Box 2
Important Notices 3
Getting to Know Your Housing 5
Setting Up Your Camera 7
Pre-Installation Checklist 7
Setting Up Your Housing 7
Opening the Housing 7
Inserting the Camera 8
Attaching the Hotshoe 9
Closing the Housing 9
Attaching the Lens Port 10
Final Check 11
Entering the Water 11
Setting Up An External Strobe 13
About the Built-In Flash 13
About Sync Cords 13
Attaching a Sync Cord 13
About Fiber Optic Cords 14
Attaching a Fiber Optic Cord 15
Maintenance 15
Post-Dive 15
Travel and Storage 16
Troubleshooting 16
Limited Warranty 18
Service and Repairs 19
Contact Us 20
![](/html/83/8380/838068d9614c8a35c9428370b4e8b616a9a04e30387492b0ea0bf8775230f057/bg5.png)
5
Getting to Know Your Housing
Shutter
button
Power ON/OFF
Custom 1 (C1)
Electrical
bulkhead
Fiber optic ports
Tray mounts
Lens port
mount
Lid
snap
Lens
release
![](/html/83/8380/838068d9614c8a35c9428370b4e8b616a9a04e30387492b0ea0bf8775230f057/bg6.png)
6
MENU
Fn
START/STOP
DISP
ISO
C2
MENU
Fn
START/STOP
DISP
ISO
O-Ring
Control dial
Camera
Mounting
Plate
Control
wheel
AE/MF/
AEL
Flash pop
up
Fn
Custom 2 (C2)
Playback
Mode dial
Menu
Start/Stop
Control
wheel Up/
down/left/
right/center