Elph 350 HS, IXUS 275 HS
S u p p l e m e n t a l I n s t r u c t i o n s
Thank you for your purchase of Ikelite equipment. Please read the
Instruction Manual and this Supplemental Instruction booklet completely
before attempting to operate or dive with this product.
Page 2
Supplied Accessories
-0200 Vinyl Port Cover
-0321.10 Vinyl break-away safety lanyard
-Flash diffuser
-Flash deflector
-0184.1 Silicone lubricant 1cc tube
-Extra Control Tips and Sleeves
Housing Specifications
Controls ............................All camera functions except Mode Switch
Width ................................5.9 in (150 mm) including controls
Height ..............................4.6 in (117 mm) including controls
Depth ................................4.0 in (102 mm) including controls
Buoyancy..........................Slightly positive in freshwater
Depth Rating ....................200 ft (60 m)
Built-in Flash ....................Yes
Strobe Connection............Slave or Fiber Optic
Main O-Ring ....................0132.45
Port O-Ring ......................0119.2
Port Outer Diameter ........3.0 in (76 mm)
U
se 46mm Lenses............No
Use 67mm Lenses............Yes (moderate vignetting present with W/A lenses)
Use Bayonet Lenses ........No
2
Page 3
Parts of the Housing
Zoom Lever
Power Button
Fiber Optic Ports
Front View
Back View
Latch
Lens Port
Tray Mounts
Shutter Button
2
1
3
4
65
1.Playback Button
2.Movie Button
3.Up / Wi-Fi / Auto Zoom Button
4.Macro / Left Button
5.FUNC./SET Button
7
8
9
ULTRA
Made in USA
compact
6.Flash / Right Button
7.DISP. Display / Down Button
8.Mobile Device Connect Button
9.MENU Button
3
Page 4
Initial Camera Settings (before placing camera in housing)
-Insert a fully charged battery. Due to the power required to operate the
camera and LCD screen, start each dive with a fully charged camera
battery.
-Slide Mode Switch to icon.
-In FUNC./SET MENU:
Set Rec./Shooting Mode to “P” Program. We recommend this setting for
underwater use to provide more creative control over the camera
settings (e.g. ISO, white balance, metering, etc.).
Set Drive Mode to “Single Shot” and Still Image Aspect Ratio to “4:3.”
Set Image Recording Size to “L” 20M and Quality to “S” Superfine.
Set Movie Quality to “HD” or “FHD.”
Set Light Metering to “ Center Weighted Avg.”
Set White Balance to Auto “AWB.” Always use auto white balance
(AWB) when using a strobe/flash. When recording video, AWB can still
be used, but for more accurate and consistent colors we recommend
setting “Custom White Balance ”.
Set ISO to “200.”
-In MENU Shooting Settings:
Set AF Frame to “Center” and Frame Size to “Normal.”
Set Digital Zoom, AF-Point Zoom and Servo AF to “Off.”
Set Continuous AF to “On.” A strobe focusing light is recommended to
assist AF underwater.
Set AF-assist Beam to “Off.”
In Flash Settings, set Red-Eye Lamp and Red-Eye Corr. to “Off.”
Set i-contrast to “Auto.”
Set Review Image after shooting to “8 Seconds.”
Set Blink Detection and Grid Lines to “Off.” Set IS Mode to “Continuous.”
-In MENU Camera Settings:
Set Date/Time and Time Zone.
Set Lens Retraction to “1 min.”
Set Eco Mode to “Off.”
4
Page 5
Initial Camera Settings - continued
In Power Saving, set Auto Power Down to “Off”; Display Off to “3 min.”
Insert and Format a memory card.
-Set Flash to “On Flash always fires.”
-Enable Macro mode when shooting very close subjects. If
overexposure occurs, back away from the subject and zoom in, and/or
use “-” exposure compensation.
To offer better ergonomics and easier access to the shutter button, a
control was not included for the Mode Switch on top of the camera.
Therefore, it is recommended to preset the Mode Switch to the " "
position before installing the camera in the housing. Photos can still
be taken if you accidentally leave it in one of the other two
non-recommended positions, however they are not ideal for underwater
Camera functions not mentioned should be set to user’s desired setting.
External Accessory Lenses
W-20 and W-30 Wide-Angle Conversion Lenses
The front of the lens port accepts the Ikelite 6420 W-20, 6430 W-30, and
other 67mm threaded wide angle or macro lenses without the need for
an adapter. An external wide angle conversion lens increases angle of
coverage so you can get closer to the subject while still fitting everything
in the frame. Moderate vignetting will likely occur at widest angle camera
lens setting with these lenses. Zoom in to eliminate, or crop the image in
post processing.
Bayonet mount lenses cannot be used with this housing.
6430 Lens
Please visit ikelite.com for additional information.
5
Page 6
AF35 Strobe Package 4035
The AutoFlash AF35 kit is a great compliment, and an effortless,
affordable way to add a flash to your new Ikelite point and shoot camera
system. Everything you need to get started is in the box. Just attach it to
the bottom of your housing and start taking pictures!
The AF35 Strobe Package is available
to support your housing along with a
full range of accessories. Please visit
ikelite.com to see the most current
nformation about recommended
i
accessories for your housing.
35
AF
ikelite
AUTOFLASH
ikelite
Spare Parts
0132.45Main o-ring
0119.2Port o-ring
0200Port cover
9523.10Tray hardware
0184.2Silicone lubricant resealable 2cc tube
6
Page 7
Customer Support
Please read the troubleshooting section of the “Instruction Manual”
before contacting Ikelite.
Limited Warranty
This Ikelite product is warranted against any manufacturing defects for a
period of one (1) year from the original date of purchase. Defective
products should be returned to Ikelite postage paid. Ikelite will, at its sole
discretion, repair or replace such products, and will return to customer
postage paid. All other claims of any nature are not covered. Except as
mentioned above, no other warranty expressed or implied applies to this
Ikelite product.