Ikelite PowerShot IXUS SD900 Ti, PowerShot SD900, 6147.9 Instruction Manual

Digital Housing

instruction manual

for

Canon

PowerShot

IXUS SD

Housing

900 Ti

#6147.9

SD900,

Ikelite Digital Housing

Zoom

Front View

Shutter
Release

Lid
Snap

Display

Playback

Menu

Func./Set

Func. Menu

Lid
Snap

Lens
Port

Back View

Lanyard

Thumb
Rest

Power

Arrow Pa d

Lift

Push For ward

Lid Snap Lock

CAMERA / MOUNT

Lid
Hook

O' Ring

Mounting Bolt

Mounting
Tray

instruction manual

#6147.9 for Canon PowerShot SD900 & IXUS 900 Ti

Congratulations on your purchase of an Ikelite Digital Camera
Housing. Ikelite has over 30 years of experience in the underwater
photographic and lighting market. Our products are designed and
built in the USA by Ikelite for both the professional and amateur
photographer.
The clear housing permits instant visual inspection of the camera
and all sealing surfaces as well as complete monitoring of controls
and camera LCD screens.
Ikelite Digital Housings are slightly negative in salt water for
stability. This housing has been water pressure tested at the
factory. Housing is pressure tested to 200' (60m).

2

OOppeenniinngg tthhee HHoouussiinng

1. Lid Snaps have a

LLoocck

g

k

.
To open, push Lid Snap Lock
forward and lift as shown.
Keep pressure on the Lid
Snap so it does not fly open
quickly.

Some lid snaps have a lot of
spring tension once they go over center, have a firm grip on the
lid snap. Lid Snaps may be opened one at a time.

IInnssttaalllliinngg tthhee CCaammeerra

a

1. Remove the back from the housing. The mounting tray for the
camera is secured to the housing back. Position the camera on
the tray and secure
it with the mounting
bolt which threads
into the camera's

UUssee a

tripod socket.
ccooiinn oorr ffllaatt bbllaaddeed
ssccrreewwddrriivveerr tto
ttiigghhtteenn tthhe
mmoouunnttiinngg bboolltt sso
tthhee ccaammeerraa iiss ffllaat
aaggaaiinnsstt tthhee ttrraayy.

CCAAUUTTIIOONN:

:

e

a

d

o

o

t

.

Some camera tripod socket threads are plastic. The mounting
tray bolt is metal. Do not cross thread or over tighten as you
may damage the camera tripod socket threads.

3