Ikelite Olympus SP-500, 6132.50 Instructional Manual

Digital Housing

instruction manual

for

Olympus

SP-500

Housing

#6132.50

Ikelite Digital Housing

Shutter
Release

Shutter
Release

Lens Po r t

FRONT VIEW

BACK VIEW

Display

Quick View

Flash
Mode

Monitor

Lid
Snap

Lid
Snap

Lid
Snap

Lid
Snap

Quick
Release
Button

Rubber
Handles

Aluminum Tray

Arrow Pa d

Flash Pop-Up

TOP VIEW

Lens Po r t

Zoom

AEL

Power

Mode

Shutter
Release

instruction manual

#6132.50 for Olympus SP-500 UZ

Congratulations on your purchase of an Ikelite Digital Camera
Housing. Ikelite has over 30 years of experience in the underwater
photographic and lighting market. Our products are designed and
built in the USA by Ikelite for both the professional and amateur
photographer.
The clear housing permits instant visual inspection of the camera
and all sealing surfaces as well as complete monitoring of controls
and camera LCD screens.
Ikelite Digital Housings are slightly negative in salt water for
stability. This housing has been water pressure tested at the
factory. Housing is pressure tested to 200’ (60m).

LLuubbrriiccaanntts

Ikelite provides silicone lubricant with the housing. We recommend

1.

s

you use only Ikelite lubricant on Ikelite products as some other
brands may cause the o’ring to swell and not seal properly.
Use only enough lubricant to lightly cover control shafts and

2.
o’rings. Wipe off any excess lubricant with a clean cloth.
Lubricant is not a sealant, it is used to reduce friction. Excessive
lubricant can collect sand and dirt which may interfere with
proper sealing.

CCAAUUTTIIOON

N

NNeevveerr uussee sspprraayy lluubbrriiccaannttss aass tthhee pprrooppeellllaanntt iinnggrreeddiieenntt ccaan
ccaauussee tthhee ppllaassttiicc hhoouussiinngg ttoo ccrraacckk.

.

n

2

3