Ikelite Olympus C-8080, 6130.80 Instruction Manual
Digital Housing
instruction manual
for
Olympus
C-8080
Housing
#6130.80
Ikelite Digital Housing
Lift
Push For ward
Lid Snap Lock
Lid
Hook
Lid
Hook
O' Ring
Housing Back
Mounting
Bolt
Mounting
Tray
Control
D
ial
Q
uick View
Shutter
Release
Card
E
xposure Comp / Info /
W
hite Balance / Record Mode
T
imer/
E
rase
AEL
AEL
OK/Menu
M
onitor
M
etering
Macro
A
rrow Pad
S
hutter
R
elease
Lid
S
nap
Lid
S
nap
Z
oom
Custom
Mode
P
ower
T
ray
P
ush
Button
R
ubber
H
andle
FRONT VIEW
BACK VIEW
External TTL
S
trobe Connection
F
lash
L
ens Port
External TTL
Strobe Connector
Lens Port
Power
Mode
Custom
Zoom
Shutter
Release
Exposure Comp/
Info/
White Balance/
Record Mode
instruction manual
#6130.80 for Olympus C-8080WZ
Thank you for your purchase of an Ikelite Digital Camera Housing.
Ikelite products have been designed and built in the USA for over
30 years by Ikelite for both the professional and amateur
photographer.
The clear housing permits instant visual inspection of the camera
and all sealing surfaces as well as complete monitoring of controls
and camera LCD screens.
Ikelite Digital Housings are slightly negative in salt water for
stability. This housing has been water pressure tested at the
factory. Housing is pressure tested to 200’ (60m).
2
TOP VIEW
NNoottee:
:
One control is used to access the White Balance, Exposure
Compensation, Record Mode and Info buttons.
EExxppoossuurree CCoommpp//RReeccoorrdd MMooddee//IInnffo
In the normal down position rotate the housings control
clockwise to depress the Record Mode/Info button and counterclockwise to depress the Exposure Compensation button.
WWhhiittee BBaallaannccee CCoonnttrrool
To access the camera's WB button, pull up on the housing
control until it stops, rotate the control clockwise to depress the
camera's White Balance button.
l
o
3
OOppeenniinngg tthhee HHoouussiinng
1. Lid Snaps have a
LLoocck
g
k
.
To open, push Lid Snap Lock
forward and lift as shown.
Keep pressure on the Lid
Snap so it does not fly open
quickly.
Some lid snaps have a lot of
spring tension once they go over center, have a firm grip on the
lid snap. Lid Snaps may be opened one at a time.
IInnssttaalllliinngg tthhee CCaammeerra
a
1. Remove the back from
the housing. The
mounting tray for the
camera is secured to
the housing back.
Position the camera on
the tray and secure it
with the mounting bolt
which threads into the
camera’s tripod socket.
Pull out on each
2.
housing control until it
stops. This will get the
controls out of the way
for installing the camera.
CCaauuttiioon
n
RReemmoovvee aannyy aacccceessssoorryy lleennss aattttaacchhmmeennttss ssuucchh aass ffiilltteerrss bbeeffoorre
iinnssttaalllliinngg tthhee ccaammeerraa iinnttoo tthhee hhoouussiinngg.
.
Any attachment that
adds length to the lens will restrict the zoom and may scratch
the inside of the housings port.
4
e
Loading...