![](/html/b4/b459/b459e717ea7c4a5589997e7e4820bb971f3a19aaba09430fa6bdfd71b8fe593e/bg2.png)
Ikelite Digital Housing
Shutter
Release
Shutter
Release
Lens Po r t
FRONT VIEW
BACK VIEW
Zoom
Lid
Snap
Lid
Snap
Lid
Snap
Lid
Snap
Quick
Release
Button
Rubber
Handles
Aluminum Tray
Arrow Pa d
OK
Monitor
Power
Quick View
AEL/
Delete/
Flash
Flash
Pop-Up
Mode
Dial
Zoom
External Strobe
Connection
Lift
Push For ward
Lid Snap Lock
Hot Shoe
Connector
Storage
Mount
(see caution)
External Strobe Connector
Waterproof Cap (see caution)
O'ring
Housing Back
Hot Shoe
Connector
Camera
instruction manual
#6130.77 for Olympus C-770 Zoom
Congratulations on your purchase of an Ikelite Digital Camera
Housing. Ikelite has over 30 years of experience in the underwater
photographic and lighting market. Our products are designed and
built in the USA by Ikelite for both the professional and amateur
photographer.
The clear housing permits instant visual inspection of the camera
and all sealing surfaces as well as complete monitoring of controls
and camera LCD screens.
Ikelite Digital Housings are slightly negative in salt water for
stability. This housing has been water pressure tested at the
factory. Housing is pressure tested to 200’ (60m).
OOppeenniinngg tthhee HHoouussiinng
1. Lid Snaps have a
LLoocck
g
k
.
To open, push Lid Snap Lock
forward and lift as shown.
Keep pressure on the Lid
Snap so it does not fly open
quickly.
Some lid snaps have a lot of
spring tension once they go over center, have a firm grip on the
lid snap. Lid Snaps may be opened one at a time.
HHoott SShhooee FFllaasshh CCoonnnneeccttiioon
n
When using an external
strobe connect the housings
Hot Shoe Connector, slide
the connector into the hot
shoe of the camera from
the back of the camera as
shown. Slide the connector
forward until it stops. The
housing Hot Shoe should be
slid into place before
securing the camera to the
housing mounting tray.
2
3