Ikegami ISD-A14S-36, ISD-A14S-36_ATM, ISD-A14S-36_ACDC, ISD-A14S-36_AA, ISD-A14S-29 User Manual

INSTRUCTION MANUAL

COLOR CAMERA

TCB014411-00

2

1

MODEL

ISD-A14S

OUTDOOR USE WARNING

WARNING – TO PREVENT FIRE OR
ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.

The apparatus shall not be exposed to
dripping or splashing and that no
objects filled with liquids, such as vases,
shall be placed on the apparatus.

Ikegami Tsushinki Co., Ltd.

Ikegami Electronics (U.S.A.), Inc.

300 Route 17 South, Mahwah, NJ 07430, U.S.A.
Phone: [phone], FAX [phone]
www.Ikegami.com

Thank you very much for your wise choice of the Ikegami Color Camera.
Please carefully read this Instruction Manual to keep your camera at
full capacity. This video camera is equipped with a 1/3.2" Digital Pixel
Sensor (DPS) system.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.

NOTE:

This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own
expense.

CAUTION;

ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY
APPROVED BY THE PART RESPONSIBLE FOR COMPLIANCE
COULD VOID THE USERS AUTHORITY TO OPERATE THE
EQUIPMENT.

Instructions for Disposal of Electric and Electronic
Equipment in Private Household

Disposal of used Electric and Electronic Equipment
(Applicable in the European Union and other European
countries with separate collection systems)

This symbol on the product, or in the related documents in
the package, indicates that this product shall not be treated
as normal household waste.Instead, it should be taken to a
proper applicable collection point or depot for the recycling

By ensuring this product is disposed of correctly, you will help prevent
possible negative consequences for the environment and human health,
which could otherwise be caused by inappropriate waste handling of
this product. The recycling of materials will help to conserve natural
resources.
For more detailed information about recycling of this product, please
contact your local city authority, your household waste disposal service
or the place where you purchased the product.

of electric and electronic equipment.

IMPORTANT SAFETY INSTRUCTIONS

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with a dry cloth.

7) Do not block any of the ventilation openings. Install in accordance
with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.

9) Do not defeat the safety purpose of the polarized or grounding type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. When
the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit
from the apparatus.

11) Only use the attachments/accessories specified by the
manufacturer.

12) Use only with a cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for
long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.

15) CAUTION - These servicing instructions are for use by qualified
service personnel only. To reduce the risk of electric shock, do not
perform any servicing other than that contained in the operating
instructions unless you are qualified to do so.

1. Handling precautions

• Do not install the camera in a water-splashed or highly
humid environment.

• Do not use the camera where the ambient temperature
drops below -10°C or rises above +50°C. The images and
component parts may be adversely affected or the camera
may not function correctly.

• Never open the camera case because there are precision
electrical and electronic components inside and an
accident may result.

• Be sure to turn off the power before installing or making
connections.

• Be careful not to drop or give a strong shock to the camera
while transporting it.

• Do not touch the image sensor.

• Do not orientate the camera directly towards the sun.

• Images on the screen may look slightly rough at high
temperatures because of the image sensor characteristics.
This is not a system failure, however.

2. General

This color camera is equipped with a 1/3.2" Digital Pixel
Sensor (DPS) system. It features WDR, high sensitivity and
high resolution, and is equipped with many functions. The
camera is best suited for being set up at ATMs and being
housed in other systems.

3. Features

(1) Hyper Wide Light Dynamic Range (Hyper WDR)
The WDR function provides for very effective

compensation of high light and dark areas in screen. This
situation may occur generally outside or viewing from
indoor to outdoor scenes. Even in large light fluctuations,
bright-and-dark subjects can be captured and viewed

clearly with a natural appearance.
(2) Small-size cube shape
The small-size cube shape of the camera allows it to be

most suitable to be installed into various devices such as

ATM units.
(3) High-quality picture and high resolution
The camera is designed for smear-free imaging and low

noise. The well-designed DSP, Digital Signal Processor,

effectively enhances details, which achieves crisp and

sharp images with a high signal-to-noise ratio. The high

resolution of a horizontal resolution of 700 TV lines is

assured.
(4) Automatic white balance
Thanks to the automatic follow-up white balance control

(ATW), the white balance adjusts itself no matter how

great the subject's color temperature fluctuates.
(5) Automatic Sensitivity Control
In conjunction with the wide dynamic control by the multi-

sampling system, the camera incorporates the automatic

sensitivity control function that always provides adequate

and bright images even through its fixed-iris lens.

4. Names of parts and
their functions

5

3

4

Focus lock screw

①

With focus adjustment complete, this is used to

mechanically lock the lens. Tighten up the two screws,
upper and lower, to lock the lens.

Lens mount

②

This is used to mount the lens on the camera.

Set-up unit connector

③

Just hook up the set-up unit (sold separately), and the

camera's settings can be readily modified. For details on
the set-up unit, contact your local salesperson.

Video output and DC12V power input connectors

④

This connector is used to connect the video output cable

and power input cable. Use the accompanying harness.
The power input DC jack is of the Center Plus type.

* This installation should be made by a qualified service

person and should conform to all local codes.

* Note: Before making connection, be sure that the power

⑤

M12 mount lens can be mounted on the camera.

is in the range of DC12V ± 10%. Be very careful
not to employ AC power because otherwise the
camera may get damaged.

Lens

5.

32.5±2（4.2）

TOP 2ND

T0

TC

TO

CO

TL

TL

T0

L1

LL

SETUP MENU

Warranty and after-sale service

• Please consult Ikegami Electronics (U.S.A.) Inc. or your
dealer for full warranty information. Your dealer will repair or
replace free of charge within the warranty period according
to the warranty coverage.

• For repairs after the expiration of the warranty period,
consult your dealer or local salesperson. It will first be
judged whether the trouble is repairable or not. Charged
servicing will then be made upon request of the user.

• Before you ask for servicing, take trouble of reading the
Instruction Manual. If the unit still fails, take note of the
model number, date of purchase, problem, etc. in detail,
and inform your dealer or sales representative.

• If you have questions about the after-sale service, contact
your dealer or local salesperson.
* We suggest you ask for preventive inspection earlier.

6. Specifications

(1) Image Sensor: 1/3.2-inch DPS CMOS sensor
(2) Pixel Number: Approx. 1,230,000 pixels,

(3) Scanning system: NTCS: 525 TV lines / 59.94Hz ,

(4) Sync system: Internal synchronization (Cr ystal-lock)
(5) Video output: VBS 1.0Vp-p/75 ohms
(6) Resolution: Horizontal; 700 TV lines
(7) S/N ratio: Over 50dB (p-p/rms)
(8) Minimum object

illumination: 0.2Lx/F2.0 (VBS output:50%)

(9) Day/Night switching: Digital Day/Night

(10)

Wide Dynamic Range: Built-in

(11)

AGC: ON/OFF (Variable)

(12)

White Balance Control: ATW(Indoor/Outdoor/AUTO1/

(13)

Digital Noise Reduction: Built-in, On or OFF, Selectable

(14)

Private Mask Setting: Built-in. Up to 16 areas

(15)

Camera ID: 2 Line, up to 26 characters

(16)

Local set-up function: Selections and settings possible on

(17)

Operating Temperature
and Relative humidity: -10 to +50°C, RH 30% to 90%

(18)

Lens mount: M12 mount

(19)

Lens: M12 fixed focal lens

Focal length

(f)

2.5mm M12 2.1 95.7° 70.1°

2.9mm M12 2.0 84.9° 60.9°

3.6mm M12 2.0 69.6° 50.4°

1280 (H) × 960 (V)

2 : 1 interlace

0.23Lx/F2.1 (VBS output:50%)

Auto or Manual, Selectable

AUTO2)/PUSH/PUSHLOCK/
MANUAL,

(DNR function)

(alphanumeric and symbols)

screen display
(The set-up unit (sold separately) is
required.)

(No Condensation)

(f2.5mm/f2.9mm/f3.6mm)

Lens

mount

Maximum

aperture ratio

(F)

View angle

(H)

(20)

Power Requirement: DC12V±10%

(21)

Power Consumption: 2.0W or less

(22)

Outer dimensions: 39.0(W)×39.0(H)×32.5(D) mm

(23)

Weight: Approx. 80g

(24)

Input/output connectors: ・VIDEO OUT BNC

(25)

Supplied accessories: Instruction Manual, 1 Copy

* Specifications and design are subject to change for product

improvements without notice.

7. External Appearance

View angle

(V)

39±2

41.6±2

24±0.5

（5.9）

(protrusion included)

DC12V DC jack

・

( Applicable plug: 5.5 mm dia.,

x 2.1 mm dia., Center Plus)

Power/video integrated cable, 1 pc.

39±2

（52.7）

3-∅3.2

12±0.5

8. Setup Flow Chart

LRUDE LRUDE LRUDE LRUDE

PUSH SET
FOR A WHILE

DAY/NIGHTAUTO

SHUTTER/AGCAUTO MODE SHUT+DCIRIS

WDR/ATR

BACKLIGHT OFF

WHITEBAL ATW

LENS DC AUTO

CAMERARESET YES
PICTADJUST

DNR

DEFOG OFF

CAMERAID
PRIVACY OFF

EXIT

TOP 2ND

+SET

+SET

DELAYCN
DAY→NIGHT
NIGHT→DAY

+SET

+SET

MANUAL

MANUAL

OFF
WDR

ATR

BLC
HLC

PUSH
USER1

USER2

MANUAL
PUSHLOCK

MANUAL

+SET

+SET

+SET

+SET

AUTO

+SET

+SET

ON 1/16-16/16

+SET +SET

+SET

DAY/NIGH

BURS

+SET

+SET

AELEVEL 0-255
AG

+SET

+SET

SHUTTER
AGC

+SET

+SET

BRIGHTNESS

CONTRAS

+SET

+SET

BRIGHTNESS LOW

CONTRAS

+SET

+SET

ENVIRONMENT

SPEED
DELAYCNT

+SET

+SET

B-GAIN
R-GAIN

+SET

+SET

B-GAIN
R-GAIN

+SET

+SET

POSITION

+SET

+SET

+SET

+SET

MODE

+SET

+SET

FLIP

BRIGHTNESS 0-255
CONTRAS
SHARPNESS
HUE
COLORGAIN
MODE OFF

YLEVE

+SET

+SET

LEVE

+SET

+SET

AREASEL
TOP
BOTTOM
LEFT
RIGHT
COLOR
TRANSP

MOSAIC

SAVEALL
NOTSAVE
CANCEL

-255
0-255
0-255

OLOR

B/W

N

OFF

DCIRIS
SHUT

N
OFF
1/60-1/100000
0-52dB

LOW
MID
HIGH

OW
MID
HIGH

MID
HIGH

OW
MID
HIGH

INDOOR
OUTDOOR
AUTO1
AUTO2
1-255
1-255

0-255
0-255
0-255
0-255
0-63

OPEN
CLOSE
0-255SPEED

OFF
H-FLIP
V-FLIP
HV-FLIP

-255
0-255
0-180
0-255

Y/C
Y
C

-7
1-7CLEVEL

OW
MID
HIGH

0-480
0-480
0-1184
0-1184
1-8

0.00

0.50

0.75

1.00
OFF
ON

+SET

+SET

+SET

+SET

+SET