High Definition
Full Digital HDTV Camera System
HDK-790E/HDK-79E
Full Digital HDTV Camera System
0.18µm design rule next generation ASICs.
2.2 Million pixel 2/3-inch FIT CCDs
12bit A/D Conversion/ 38-bit internal digital processing circuits
Multi-standard / Simulcast Broadcasting
(1080/60i, 480/60i interlace output standard, 1080/24p, 720/60p, 480/60p progressive output Option)
Various Accessories available for different operating styles.
1
HDK-790E
HDK-79E
Anticipating Digital Broadcasting.
Ushering in a New Era.
The Heart of the New Evolution.
2
New Camera Control Unit, the CCU-790A
The Ikegami HDK-series HDTV cameras are designed as a Multi-Use Camera to meet the format requirements of HDTV and
SDTV have incorporated next-generation 0.18 µm ASICs into a new Camera Control Unit, the CCU-790A.
Also using newly developed ASICs, an Optional Engine Board has been developed to achieve Frame and Multi-Format
Conversion. (24p, 30p, 50p, 720p, 1080i, 480i etc)
Incorporating a new, next-generation digital process ASIC
Using newly developed full digital process ICs, precision designed at 0.18µm rule, the video
signals are digitalized with 12-bit A/D conversion and up to 38-bit internal digital processing
(quantization) circuits.
DTL Correction
A detail correction system, including digitally processed horizontal, vertical and diagonal correction
signal for red, green and blue video, is incorporated into the camera head, and obtains noise-free full
resolution HDTV picture quality even if the camera is used in stand-alone configuration.
Independent DTL
With Independent DTL system in the CCU, the type and amount of compensation can be
optimized for the different requirements of HDTV and SDTV.
CCU-790A
New Engine Board (option)
Next-generation digital process
ASIC (0.18µm design rule)
Six-axis + Two-axis Color Corrector
Includes a color correction function that enables hue and saturation to
be adjusted for each of the six primary colors (R, G, B, Cy, Y, Mg),
plus another function to make color correction of two user-selected
colors of the subject.
Enhanced Digital DTL
Improved sensuous expressions such as texture and sheen, and
richer reproduction of details in skin tone in dark backgrounds.
Super KNEE
The Knee system makes corrections without
changing the hue of the highlighted parts
and produces a more natural highlight
appearance, rather than washing it out.
Clear VF DTL function
This function makes a difference in the edging of
the image exclusively in the viewfinder, to make the
precise point of focus easier to find, and to make it
easier for the cameraperson to focus.
Wide-band DTL function
Wide-band edging gives the impression that fine
parts of subjects or high frequency images have a
higher resolution.
Evolutionary New Features /
Designed for DTV
2/3-inch 2,200,000-pixel FIT CCDs
2/3-inch 2,200,000-pixel 1080i FIT CCD image sensors are employed to achieve superb picture quality with a horizontal resolution
of 1,000 lines and a S/N ratio of 56dB.
Simulcast (High-end HDTV and NTSC Camera)
Using a down converter incorporated in the CCU as standard, the HDK-790E/79E can be operated as a high-end NTSC studio
camera. A high sampling frequency of 28.64MHz achieves maximum resolution of 900 TV lines in the NTSC format. Both HDTV
video and SDTV (NTSC) are provided simultaneously from the CCU and in both digital and analog form. Monitoring video signals
(WFM and PM) are likewise provided in both HDTV and SDTV to adapt to different system installations and to permit continued use
of conventional monitoring.
Multi-standard / Simulcast Broadcasting
12bit Full Digital
Sophisticated features made
possible with digital technologies
3
Perfect Match Between Studio and Portable Cameras
The portable and studio cameras use the same CCD, same
analog and digital video processing, same optical filters, and
in most cases, the same PC boards, providing an unparalleled
similarity in performance and function between the two
camera types.
HD SDI Output from the Camera Head
HD SDI output is provided from the camera head, and by using
VTR connector (option), direct connection is possible with HD
digital equipment, such as an HD VTR.
RET Video and Teleprompter Video
The CCU-790A accepts two channels of return video input as
standard. It is available with up to 4ch as a factory option. Input
signals can be selected from HD-SDI, D1 component and VBS
signals. The CCU includes an up converter permitting a SDTV
return video signal (D1) to be viewed on the HD viewfinder. The
CCU transmits the HD return video signal(each Y, P
B, PR) and
two NTSC Q-TV video signals (Q-TV1*, Q-TV2*) to the camera
for teleprompter and external monitoring purposes.
*
For the HDK-79E, either Q-TV1 or Q-TV2 can be selected for output.
Low Center of Gravity
Both the studio and portable cameras are compact with low
center-of-gravity. Especially for the portable camera there is
excellent balance when operated on the shoulder. Regarding
the 7-inch viewfinder for HDK-790E, the position is lower and
closer to the optical axis of the camera head.
Return Switch
A Return select switch is located on the handle grip of the
portable camera to control the selection when the camera is
held off the shoulder, such as on the hip for low angle shots.
High Performance Viewfinders
For the HDK-79E, a 2-inch 16:9 high definition VF for portable
application and a 5-inch B/W VF (option) for studio application
are available. Employing a magnifying eye-piece in the 2-inch
VF, visibility is further improved. For the HDK-790E, 7" B/W VF
and 7" color VF (option) are available.
7-inch VF attaches to the camera with a mechanism allowing
easy panning and tilting for VF. Cable connection between the
camera and the 7-inch VF is integrated into the pan and tilt
mechanism and fully protected against possible damage.
In addition, a 6-inch color LCD viewfinder is also available as
an option for both studio and portable camera models.
On-Line Diagnostics
An On-line Diagnostic System monitors a range of circuits including
video, control, fiber optic transmission, pulse and power supply.
Application of Standard 2/3-inch Lenses
The camera incorporates the HDTV lens mount (BTA-S-1005B
type) as standard. But the Ikegami 2/3-inch lens mount can
be specified as a factory order option to use lenses from
conventional NTSC Ikegami HK-series cameras such as
HK-388/377/366/355, etc.
Rotating Camera Cable Connection
The SMPTE standard fiber camera cable connector is provided
with a pivoting mount on both the portable and studio camera
heads. This permits a natural bend to the cable, even for
example, when the portable camera is placed on the ground.
Strong Hand Grips
HDK-790E has its side handle
directly attached to the camera
head, which ensures the solid
structure of the handle. It also
has a loop to attach a rope,
by which the camera head can
be hoisted.
Return Switch on the handle grip
HDK-79E rear panel
HDK-790E
HDK-79E
HDK-790E rear panel
Easy to Use, attention to the details
OCP-790
4
SE-79D System Expander
The SE-79D System Expander enables the use of the 7-inch viewfinder and full studio lenses with the HDK-79E, converting the
portable camera into a full facility studio camera. Installation of the camera into the SE-79D is very easy, and conversion back to
portable configuration is quick for maximum operating flexibility.
SE-79D System Expander
Control Panel System
The desired control panel which
matches the needs of user can be
selected, and connected to the
CCU.
MCP ( Maintenance Control Panel )
An MCP control panel is used for
maintenance and fine adjustment
purposes. Up to 40 cameras can be
controlled from an MCP when the
MCP is used with the CSU Camera Select Unit.
OCP ( Operation Control Panel )
An OCP control panel is used for normal operation, and includes the primary
operating control functions. The OCP is available in joystick and rotary
versions.
CSU-100
MCP-110
CB-79HD (CCU side)
TFA-79HD (Camera Side)
TA-79HD Triax Adaptor
(Docking type)
State of the Art,
Expanding HDTV System Accessories
Transmission Distance
Up to 850m (2,800ft.) by 8.8mm diameter triax / Fujikura type ll-21479
Up to 1,550m (5,100ft.) by 14.5mm diameter triax / Fujikura type ll-21479
Up to 500m (1,600ft.) by 9.2mm diameter triax / Belden type 9267
Up to 1,000m (3,300ft.) by 13.2mm diameter triax / Belden type 9267
CB-79HD/TA-79HD Triax Adaptor System
The CB-79HD/TA-79HD HDTV new triax adaptor system is a high performance transmission technology. It is ideally suited for
various field applications in the digital era. The system consists of the TA-79HD docking Triax Adaptor and the CB-79HD CCU
side Converter Box. The CCU converter box enables use of triax or fiber makes cable without any reconfiguration. Docking
type adaptors for triax or fiber make camera configuration quick and easy. No local
AC power is necessary because the CCU provides AC power for the full system.
The CB-79HD CCU converter box is only 1U rack size providing efficient use
of space.
CB-79HD/TFA-79HD HDTV Triax System
Ikegami's second generation HDTV triax system is now
available for the full studio cameras, the HDK-790E and HDK-
725. The TFA-79HD, housed in a rugged weather resistant case,
is used together with the CB-79HD at the CCU side for full
resolution transmission of HD signals over conventional triax
cable.
MCP-110
OCP-790
TA-79HD Triax Adaptor
CB-79HD
CCU-790A
Fiber Cable Triax Cable
FA-79 Fiber Cable Adaptor
HDK-790E
CB-79HD
CCU-790A
CB-79HD
TFA-79HD
CCU-790A
CB-79HD
CCU-790A
HDK-790E
HD Location Shooting
RCU-79 front
Microphone
HDK-79E
RCU-70/RCU-79
Mic Holder
T-791 Tripod Adaptor
Headset
Headset
Headset
ACP-26
CA-79D/FA-79
DC Cable
(10pin - 10pin)
REMOTE Cable
HD VTR Cable
Analog
200m MAX
MIC
Coaxial Cable
HD SDI Output
Monitor
WFM
Portable VCR
HD VTR Cable
Analog
RCP-50
HD Analog
HD Analog
Memory Card
The VTR connector is provided on
the rear side panel of the CA-79D
to prevent the cable from being a
hindrance in tight locations sites or
low-angle shooting.
BS-79 Half-Rack Base Station
A half-rack base station BS-79 is available, permitting full SMPTE
fiber cable extension with a compact base station. It supports
HDTV/SDTV simulcast operation with an up converter / down
converter built into its half-rack size. It is suitable for smallsized HD vans and rental / flight-pack systems.
The HDK-790E and HDK-79E with the System expander can be connected with the BS-79
(factory option / AC operation only)
HDK-79E+CA-79D
Provides operation with HDTV VTR similar to location shooting in SDTV.
RCU-79 rear
Slide mechanism for RCU-79
5
HD Location Shooting
Suitable for small-sized HD vans and rental / flight-pack systems.
Space-Saving Design
Camera Adaptors
There are two kinds of camera adaptors available: the small camera adaptor CA-79D,
which best suits local VTR operation, and the fiber adaptor FA-79, which enables the couse of CCU operation and local VTR operation. You can select the appropriate type of
adaptor depending on the desired manner of operation.
Camera Control Unit for reliable picture production
Configurations available are: the RCU-79, a combination remote control panel and
extension device system, and the RCU-70, with the remote control panel detached from
the unit. Together with a DC power supply, this system provides complete camera control
and system interconnect for high quality field production for location shooting.
BS-79 front BS-79 rear
6
HDK-79E
HDK-790E
System Applications
Scanning System
HDK-790E/79E
.......................
1125 (59.94Hz or 60Hz, selectable)
CCU-790A
............................
1080 lines 59.94 or 60Hz 2:1 interlaced
480i lines 59.94 Hz 2:1 interlaced
1080 lines 59.94 Hz 2:1 interlaced 2-3 pull-down (option)
1080 lines 59.94 Hz 2:1 interlaced variable frame (option)
1080 lines 29.97 Hz 1:1 non-interlaced (option)
1080 lines 29.97 Hz SF non-interlaced (option)
1080 lines 23.98 Hz 1:1 non-interlaced (option)
1080 lines 23.98 Hz SF non-interlaced (option)
720 lines 59.94 Hz 1:1 non-interlaced (option)
720 lines 59.94Hz 1:1 non-interlaced variable frame (option)
CCD image sensor
......................
2/3-inch 2,200,000-pixel FIT CCD
Optical system
............................
2/3-inch 3CCD, f1.4 BaF52
Lens mount
...............................
BTA S-1005B (standard) or
2/3-inch Ikegami mount (factory option)
Viewfinder
HDK-790E
.................................
7-inch B/W viewfinder (standard) or
7-inch color viewfinder (option) or
6-inch color LCD viewfinder (option)
HDK-79E
...................................
2-inch B/W viewfinder (standard) or
5-inch B/W viewfinder (option) or
6-inch color LCD viewfinder (option)
Input signals
HDK-790E/79E
External SYNC signal
..................
SYNC 0.6Vp-p ±6dB
Audio signal*
............................
-60, -50, -40, -30, -20, -10, 0, +4dB 600Ω(2ch, balanced)
(after selecting, variable
±
5dB available)
(*option for HDK-790E)
Intercom signal
..........................
2ch (ENG/PROD) (110 type or XLR type)
CCU-790A
[HDTV system (SMPTE274M and SMPTE292M)]
Phase reference signal
................
PS/S 0.6Vp-p ±6dB 75Ω bridged,1ch
Return video signal
.....................
PS 1.0Vp-p 75Ω 2ch (standard)
4ch (factory option)
(Input signal is SDI signal)
[NTSC system]
Return video signal
.....................
VBS 1.0Vp-p 75Ω 2ch (standard)
4ch (factory option)
(Input signal is SDI signal)
External genlock signal
................
VBS/PS/S 1.0Vp-p 75Ω bridged,1ch
Q-TV signal
.............................
VBS or PS 1.0Vp-p 75Ω Single End,2ch
Intercom/ Tally
Intercom (ENG/PROD)
.............
(4-wire or Clearcom or RTS)
4-wire
..................................
0dBm 600Ω 2ch
Clearcom
..............................
-15dBs 200Ω 2ch
RTS
....................................
0dBm 200Ω 2ch
Tally
....................................
contact/voltage R, G 2ch
Program sound
.......................
0dBs 600Ω 2ch
Output signals
HDK-790E/79E
Video signals
Analog signal
............................
R,G,B or Y, PB, PR each 1ch, 75Ω(multi-pin connector)
HD SDI signal
...........................
Y, PB, PR 4:2:2 serial digital 2ch
(BNC connector, Camera cable connector) (SMPTE292M)
Q-TV1,2 signal*
.........................
Analog signal, 1ch 75Ω(BNC connector)
(*HDK-79E: Q-TV1 or 2 selectable)
Return out
...............................
HD analog signal 75Ω(BNC connector)
VTR signal (option)
........................
BTA S-1005B
Monitor signal
..............................
R,G,B or Y, PB, PR select 1ch, 75Ω(BNC connector)
Intercom signal
.............................
0dBs 2ch (ENG/PROD) (110 type or XLR type)
CCU-790A
[HDTV system]
Analog video signal (SMPTE274M)
Y, P
B, PR 75Ω each 1ch
(R,G,B signal output is selectable by internal switch)
HD SDI signal (SMPTE294M)
...........
75Ω 3ch
WFM signal
.................................
R,G,B,Y select 1.0Vp-p 75Ω or HD-SDI 75Ω 2ch (factory option)
PM signal
.................................
R,G,B,Y select 1.0Vp-p 75Ω 2ch
HD-SDI 75
Ω 2ch (factory option)
[NTSC system]
Composite video signal
...................
VBS 1.0Vp-p 75Ω 3ch
Component video signal
..................
R,G,B 0.7Vp-p 75Ω each 1ch
(Y, PB, PR signal output is selectable by internal switch)
Component serial signal (D1)
...........
(SMPTE259M) 270Mbit/s
0.8Vp-p 75Ω 4ch
WFM signal
...............................
R,G,B,Y,ENC select 1.0Vp-p 75Ω or SDI 75Ω 2ch
PM signal
.................................
R,G,B,Y,ENC select 1.0Vp-p 75Ω or SDI 75Ω 2ch
Phase reference signal
..................
sync 0.6Vp-p 75Ω 1ch
(HD or SD automatically selectable)
[Progressive system (option) ]
1080p SDI signal (SMPTE 274M option) 1920 X 1080 75Ω 3ch
(29.97Hz 1:1, 29.97Hz SF, 23.98Hz 1:1, 23.98Hz SF)
720p SDI signal (SMPTE 296M option) 1280 X 720 75Ω 3ch (59.94Hz 1:1)
480p serial signal (SMPTE294M, factory option)
Audio Signal
Mic
....................................................
0dBm 600Ω 2ch
Digital audio
.........................................
AES 3ID 1Vp-p 75Ω 1ch
(In conformity with AES/EBU)
Intercom/Tally
Intercom (ENG/PROD)
............................
(4-wire or Clearcom or RTS)
4-wire
................................................
0dBm 600Ω 2ch
Clearcom
............................................
-15dBs 200Ω 2ch
RTS
..................................................
0dBm 200Ω 2ch
Filter
....................................................
1 2 3 4 5
ND CAP 100% 25% 6.2% 1.6%
CC CROSS 3200K 4300K 6300K 8000K
Electric color temperature
............................
5600K
Ambient temperature
.................................
HDK-790E/79E : -20˚C~+45˚C (-4˚F~+112˚F)
CCU-790 : -0˚C
~
+45˚C (+32˚F~+112˚F)
Relative humidity
.....................................
30%~90% (Non-condensing)
Operating voltage
HDK-790E
...........................................
AC100/110/117/220/240 ±10%
HDK-79E
............................................
11~16V
Weight
HDK-790E
...........................................
24kg (53 lbs) (without lens)
7-inch B/W viewfinder : approx. 4.5kg (10 lbs)
7-inch color viewfinder (option) : approx. 5kg (11 lbs)
HDK-79E
.............................................
6.0kg (13.2 lbs) (including fiber adaptor, without lens)
2-inch B/W viewfinder : approx. 0.8kg (1.8 lbs)
CCU-790A
...........................................
approx. 30kg (66 lbs)
Dimensions
HDK-790E
...........................................
W310 X H410.5 X D380mm
(W12
X
H16 X D15 inches)
HDK-79E
............................................
W105 X H222 X D375mm
(W4.1 X H8.7 X D14.8 inches)
CCU-790A
...........................................
W438 X H132 X D430mm
(W17.2 X H52 X D16.9 inches)
Sensitivity
...............................................
F10/2,000 lx
S/N
HDTV system
........................................
56dB
NTSC system
........................................
64dB
Modulation depth
HDTV system
........................................
45% or more (800 TV lines, 27.5MHz)
NTSC system
........................................
90% or more (400 TV lines, 5MHz)
Limiting resolution
HDTV system
.......................................
1,000 TV lines
NTSC system
.......................................
900 TV lines
Video frequency response (Base Station output)
Y output
..............................................
Below 60Hz............ Falling
60Hz
~
30MHz........ within ±1.0dB
Over 30MHz........... Falling
P
B, PR output signal
...............................
Below 60Hz............ Falling
60Hz
~
15MHz........ within ±1.0dB
Over 15MHz........... Falling
NTSC output signal (Ych 100kHz, output signal from external camera control equipment)
Below 60Hz............ Falling
60Hz
~
4.5MHz....... within ±0.5dB
4.5MHz
~
8.0MHz... within ±1.0dB
Over 8MHz............. Falling
Audio Frequency response (Base Station output)
Y output
..............................................
Below 100Hz.......... Falling
100Hz
~
10kHz....... within ±1.0dB
Over 10kHz............. Falling
Contour correction
Vertical
..................................................
5line
Horizontal
...............................................
Boost frequency, 13MHz~24MHz (HDTV)
Boost frequency, 2.7MHz
~
8.9MHz (SDTV)
Gamma
..................................................
OFF, 0.35, 0.4, 0.45
Gain
.....................................................
-3dB, 0dB, +3dB, +6dB, +12dB or +18dB (User spec.)
Power consumption
HDK-790E
............................................
approx. 500VA (including 7-inch color viewfinder and CCU)
HDK-79E
.............................................
Head + FA-79 : 36W (on site VTR location)
Head + CA-79D : 34W
2-inch VF : 6W
Ratings
Performance
H43B053-HI-K0.5 Printed in Japan
Design and specifications are subject to change without notice.
HEADQUARTERS
WESTCOAST OFFICE
SOUTHWEST OFFICE
MIDWEST OFFICE
SOUTHEAST OFFICE
37 BROOK AVENUE, MAYWOOD, NJ 07607
Phone:(201) 368-9171 Fax :(201) 569-1626
2631 MANHATTAN BEACH BLVD., REDONDO BEACH, CA 90278 Phone:(310) 297-1900 Fax :(310) 536-9550
773 BEARDEN WAXAHACHIE,TX 75167 Phone:(972) 869-2363 Fax:(972) 556-1057
747 CHURCH ROAD, UNIT C1, ELMHURST, IL 60126 Phone:(630) 834-9774 Fax:(630) 834-8689
5200 N.W. 33RD AVENUE, SUITE 111 FORT LAUDERDALE, FL 33309 Phone:(954) 735-2203 Fax: (954) 735-2227
IKEGAMI ELECTRONICS
(
U.S.A.), INC.
URL http: //www.ikegami.com
Loading...