Ikegami FE-B100A, FE-C140SE Supplementary Manual

FE-C140SE / FE-B100A Fiber Extension System

The fiber extension system transmits HD-SDI, genlock, control, intercom, and microphone audio up to
500m (or up to 2Km with an additional separate power supply) on SMPTE hybrid fiber cable.

Large Viewfinder support

For manned operation, a large studio viewfinder such as 5" B/W CRT
VF or 9" color LCD VF can be mounted on the FE-C140SE adapter.

Fiber System Diagram

Ikegami

TALLY BOX (op)

VF (op)

MIC (op)

Prompter

ESC / CB

PM

RET VIDEO OUT (SD-VBS)

RS422 or RS232C

*1

*3

FE-C140SE

Fiber Cable Max.500m
(w/ Separate Power Max 2,000m)

HEADSET

*2

HEADSET

Prompter

Remote Control

Panel

HD SDI

Digital Swer.

RS422 or
RS232C

*1

HD-SDI
OUT-1

HD-SDI OUT-2

FE-B100A

SD RET-1.2 IN*4

PM

TALLY OUT

WFM

SP

Note:
*1: RS-422/RS-232C serial data interface is provided for Prompter or Pan/Tilt system.
*2: External +12VDC power must be provided at the camera side for extending cable length more than 500m.
*3: When SD-RET is selected, there is no RET-SDI output at CA side.
*4 : Due to transmission of one RET channel over the camera cable, RET-1/RET-2 is switched at CA.

HD-SDI OUT-3

(EMBEDDED AUDIO DEMUX)

SD RET-1.2 IN

PGM IN (INTERCOM)

INTERCOMAUDIO OUT (ANALOG)

REF IN

*4

OCP Operation

Remote Control

Reference Sync

HD TRI SYNC or SD BBS

HD RET

Source (HD:SDI)

SD RET

(SD:VBS)

Source

Program Audio

(ANALOG)

Source

Intercom System

with TALLY SYSTEM

Advanced Network Control System

The OCP-200 / MCP-200 is a new Network based
control panel system offered as an alternate to the
traditional Ikegami style control panels. The Arc­net system allows any OCP-200 to control any
camera with assignment set at the OCP itself.
System wiring is simplified with control of up to 96
cameras via a single coax cable between CCU
locations and video control locations. The OCP-200
and MCP-200 include touch screen LCDs. The
depth-of-control of the OCP-200 can be selected
from basic to complete to fit the customers'
operating discipline. Conventional one by one
camera control connection is also available.

BSH-200

Front

Rear

CPH-200

Front

Rear

OCP-200

MCP-200

Fiber Extension System

F

0

F

0

FE-C140SE/FE-B100A

E-100A with HDN-X1

FE-C140SE Camera Adapter

Transmission
Video Trunk signal
Transmission Distance
Input Signals

Output signals

Ambient Operating Temperature
Weight
Dimensions

FE-B100A Base Station

Input Signals

Output Signals

Weight
Dimensions

HD-SDI SMPTE292M 1.485Gbps, 1 channel
HD-SDI SMPTE292M or NTSC VBS, 1 channel
500m or 2000m with an additional separate power supply
Audio signal :-60 / -40 / -20 / 0dBm, 600Ω balanced, 2 channel
Intercom signal :-60dBm, 1 channel
Camera control :Ikegami COMMAND, 1 channel (PRC05-8pin M)
Serial Interface :RS-232C/RS-422 (D-SUB 25-pin F)
RET signal (SDI) :HD-SDI SMPTE292M, 1 channel (75Ω BNC)
RET signal (Analog) :HD-Y ch: PS 1.0Vp-p or NTSC VBS: VS 1.0p-p, 1 channel (75Ω BNC)
Phase reference :Tri-Sync 0.6Vp-p (BNC)
Audio PGM :0dBm, 600Ω balanced, 1 channel (XLR-3pin M)
Camera control :Ikegami COMMAND, 1 channel (PRC05-8pin M)
Serial Interface :RS-232C/RS-422 (D-SUB 25-pin F)

-10℃ ~ +45℃(+14°F ~ +112°F) [Humidity 30% ~ 90%, non-condensing]
Approx. 4.5kg (9.9 lbs), excluding HDL-45, VF.
W148 x H198 x D280mm (W5.83 x H7.8 x D11.02 inches)

Ratings&Performance

RET signal (HD) :HD-SDI SMPTE292M (75Ω BNC)
RET signal (SD) :NTSC VBS (75Ω BNC)
Phase reference :Tri-Sync 0.6Vp-p or BBS 0.3Vp-p, 2-channel (75Ω BNC) (HD/SD auto detection)
Intercom signal :-60dBm, 1 channel
Audio PGM :0dBm, 600Ω balanced, 1 channel (XLR-3pin M)
Intercom signal :+10dBu max.
Camera control :Ikegami COMMAND, 1 channel (PRC05-8pin M)
Serial Interface :RS-232C/RS-422 (D-SUB 25-pin F)
Main Video :HD-SDI SMPTE292M 1.485Gbps, 4 channel (75Ω BNC)
Audio signal :+4dBm, 600Ω balanced, 2 channel
Intercom signal :+10dBu max.
Serial Interface :RS-232C/RS-422 (D-SUB 25-pin F)
Approx. 4.4kg (9.7 lbs)
W214.6 x H77.5 x D351.5mm (W8.85 x H3.05 x D13.84 inches)

E-100A with HDS-V1

Ratings&Performance

Design and specifications are subject to change without notice.

IKEGAMI ELECTRONICS (U.S.A.), INC.

HEADQUARTERS 37 BROOK AVENUE, MAYWOOD, NJ 07607

WESTCOAST OFFICE 2631 MANHATTAN BEACH BLVD., REDONDO BEACH, CA 90278

SOUTHWEST OFFICE 773 BEARDEN WAXAHACHIE,TX 75167 Phone:[phone] Fax:[phone]

MIDWEST OFFICE 747 CHURCH ROAD, UNIT C1, ELMHURST, IL 60126 Phone:[phone] Fax:[phone]

SOUTHEAST OFFICE 5200 N.W. 33RD AVENUE, SUITE 111 FORT LAUDERDALE, FL 33309 Phone:[phone] Fax: [phone]

Phone:[phone] Fax:[phone]

Phone:[phone] Fax:[phone]

URL http://www.ikegami.com

H125B083-MK1.5 Printed in Japan

ISO 9001

Certified

JQA-0773

ISO 14001

Certified

JQA-EM3888