ENGLISH 4
1. Battery compartment. Insert AAA batteries
according to pictogram on product.
2. Micro USB port for power & charging
3. Microphone
4. Status Indicator:
Flashing White: Pairing Mode/Mute
Solid White: Paired with Bluetooth/Audio In
Flashing Red: Low battery
Solid Red: Charging
5. 3.5mm Audio in jack
6. Press >2 sec: Power On/Off
Press in Bluetooth mode: Play/Pause
Press in phone mode: Mute
Press >10 sec: Factory reset
After power on, go to your device Bluetooth
menu and connect to ENEBY speaker.
If no music been playing for 20 min, ENEBY will
enter sleep mode.
Up to 8 devices can be paired with Bluetooth.
Recommended power supply:
5Vdc, min 2A (Not included)
Recommended battery types:
IKEA LADDA 900 (1.2V, 900mAh, Ni-MH) (Not
included)
Estimated play time at 50% volume: 15 hours
Do not mix batteries of different capacities,
types or date stamps.
WARNING:
Never install the product in a conned space.
Always leave a space of at least 5 mm around
the product for ventilation. Product and Batteries
(battery pack or batteries installed) shall not
be exposed to excessive heat such as sunshine,
re or similar. No naked ame sources, such as
candle lights should be placed on the apparatus.
CAUTION:
Risk of explosion if battery replaced by an
incorrect type. Dispose of used batteries
according to the instruction.
Do not attempt to repair this product yourself, as
opening or removing covers may expose you to
dangerous voltage points or other risks.
Model Name: ENEBY
Type Number: E1715
Operating
temperatures:
Operating humidity: 0 to 95%RH
Operating Frequency: 2.4-2.48GHz
Radio output power: 10 dBm
0°C to 45°C
(32°F to 113°F)
5
This equipment complies with radio frequency
exposure limits set forth by the FCC for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 15 mm between
the device and the user or bystanders.
This device must not be co-located or operating in conjunction with any other antenna or
transmitter.