IKEA ENEBY 20, ENEBY 30 User Manual

ENEBY

ENGLISH
FRANÇAIS
ESPAÑOL

3
10
17

TABLE OF CONTENTS

ENEBY 20/30 overview ............................................ 4

Getting started ...................................................... 5

Turn Speaker On/Off .............................................. 5

Add Bluetooth device .............................................. 5

Play music from external source .............................. 5

Use speaker throughout home ................................. 5

Attach speaker to a wall or a stand ........................... 5

Other Settings ....................................................... 5

Safety and important notice .................................... 6

Care Instructions ................................................... 6

Troubleshooting ..................................................... 7

Technical data ........................................................ 8

ENGLISH 3

4

1. Power On/Off/Volume control

2. AC IN

3. AUDIO IN

4. For ENEBY wall mount and ENEBY
Stand (sold separately)

5. Battery compartment lid (only on
ENEBY 20, sold separately)

4

3

2

1

5

1

4

3
2

TYPE E1720 - ENEBY 20
TYPE E1730 - ENEBY 30

ENEBY 20 (E1720)

ENEBY 30 (E1730)

640mA- 300mA

640mA-300m A

Getting started:

1. Connect mains cord into AC In (2)
connector.

2. A quick press on the knob (1) turns the
speaker on/off. White LED is now on.
If a paired device is found, the LED
shines without blinking and your speaker
is ready to use.

3. If no device is found the speaker LED
continues to blink and enters pairing
mode automatically. Go to the Bluetooth
settings in your mobile device and
connect to ENEBY 20/30. The LED should
now stop blinking and your speaker is
ready to use.
If no music has been playing for 20min,
the speaker will enter sleep mode.

Adjust Volume

Turn the knob (1) left to decrease or turn it
right to increase volume level.

Add additional Bluetooth device(s)

(max 8 devices)

1. Go to your Bluetooth menu on your
mobile device and connect to ENEBY
20/30.

2. Once Bluetooth connection is
established, the white LED stops
blinking.

Unpair Bluetooth device

Go to your Bluetooth menu on your mobile
device and unpair ENEBY 20/30 from your
devices.

Play music from external source:

Connect a portable audio device to the
AUDIO IN (3) jack on the rear panel. The
speaker automatically detects the external
input and disables Bluetooth functionality.
Use a 3.5mm 3-pol Audio cable for this
feature.

Use speaker throughout home:

ENEBY 20 has the possibility to be portable.
ENEBY battery pack is sold separately.

— To insert the battery, open the

compartment lid (5) and insert the
battery in the correct direction.

— The battery is charged in the product

when mains cord is connected.

— When battery is low a red LED in the

knob (1) will ash. During charging the

red LED is on.

Attach Speaker to a wall or a stand:

ENEBY wall mount and ENEBY stand are
accessories and are sold separately.
Use holes (4) and included screws to mount
stand or wall mount. Do not over tighten
the screws.

5

Other settings:
Bass Control:

Treble Control:

Press knob (1) 3 sec. This enters the bass level control.

LED ash slowly. Turn left/right to adjust. Conrm bass setting and

enter the treble setting control by pressing the knob one time.

LED ash quickly. Turn left/right to adjust treble and conrm by

pressing the knob one time and exit sound settings.

Factory reset:: Press knob (1) 10 sec. This deletes all paired Bluetooth devices and

restores default sound settings.

Safety and important notice

WARNING:

— Risk of overheating! Never install the

product in a conned space. Always

leave a space of at least 5 mm around
the product for ventilation. Ensure
curtains or other objects never cover
the ventilation slots on the product.

— Never place the product or batteries

near open ames or other heat sources,

including direct sunlight.

— Only use this product indoors. The

apparatus shall not be exposed to

dripping or splashing, no objects lled

with liquids, such as vases, shall be
placed on the apparatus.

— Never place this product on other

electrical equipment.

— The mains plug or an appliance coupler

is to be used as a disconnect device, the
disconnect device shall remain readily
operable.

— If the supply cord is damaged, replace

it with a new cord set which is type­approved for your country.

— Batteries (battery pack or batteries

installed) shall not be exposed to

excessive heat such as sunshine, re or

similar.

IMPORTANT!

— The speaker is for indoor use only and

can be used in temperatures ranging
from 0º C to 45º C.

— Do not leave the speaker in direct

sunlight or near any heat source, as it
may overheat.

— Do not subject the speaker to wet, moist

or excessively dusty environments, as
this may cause damage.

— The range between the speaker and the

receiver is measured in open air.

— Different building materials and

placement of the units can affect the
wireless connectivity range.

— Too high volume can damage your

hearing.
— Do not touch the acoustic components.
— Don not use the product as a shelf or

stand.

CARE INSTRUCTIONS

To clean the speaker, wipe with a moist
cloth. Never submerge the speaker in
water.

NOTE!

Never use abrasive cleaners or chemical
solvents as this can damage the product.

PRODUCT SERVICING

Do not attempt to repair this product
yourself, as opening or removing covers
may expose you to dangerous voltage
points or other risks.

Manufacturer: IKEA of Sweden AB

Address: Box 702, SE-343 81 ÄLMHULT

6

Troubleshooting

7

Problem Tip

Cannot use Bluetooth: Make sure 3.5mm connector is not plugged into AUDIO IN

jack on rear panel.
Make sure your phone, tablet or other media device supports

Bluetooth.
Make sure to connect to the IKEA device called ENEBY 20/30
Make sure your phone, tablet or other media device is paired

and that its Bluetooth is turned on.
Make sure no other Bluetooth devices in the room are paired.

If so, turn off the Bluetooth function in that device.

Poor sound quality when
playing via Bluetooth:

If Bluetooth reception is poor, move the device closer to the
speaker or remove any obstacles between the device and the
speaker.
Note: Bluetooth reception will normally operate at a distance
of up to 6-8m in conditions with an unobstructed path. When
objects, furniture or walls are in between, Bluetooth reception
will be reduced. When the device is placed in pockets of
clothes or in a bag, Bluetooth reception can be reduced.

Poor sound quality when
playing via AUDIO IN
input:

Make sure your phone, table or other media device is not at
maximum volume, if so, turn down the volume.

Technical data

8

Model Name

ENEBY 20 ENEBY 30

Type number

E1720 E1730

Input

100-240VAC 50-60Hz

Standby Power Consumption

<0.5 W

Rated Power Consumption

35.5W/230V

39.5W/110V

37W/230V
40W/110V

Operating temperatures

0°C to 45°C

Operating humidity

0 to 95%RH

Dimensions (mm)

199x199x80

(without handle)

299x299x106

Weight

1.5kg

(without battery)

3.8kg

Audio In

3.5mm jack

Audio In Input sensitivity

1.65V max

Battery playtime at 50% volume

10-12 Hours N/A

Auto Standby

20 min

Speaker type

mixed mono

Woofer

1 x 3.2" 2 x 4"

Soft dome tweeter

1 x 1"

Amplier output power

1x15W + 1x5W 2x15W + 1x10W

Frequency range

48 - 20 kHz 30 - 20 KHz

Bluetooth Version

V 4.2

Wireless range in open air

8-10 m

Operating frequency

2.4 - 2.48 GHz

Radio output power

4 dBm