Page 1
Rayden
Rayden LED Lights
Quick Start Guide
What’s Included
1 x Light Fixture
1 x Yoke Mount
1 x Neutral Density Filter
1 x Power Supply with Cable
1 x Power Supply for Dual Charger
1 x DV Dual Battery Charger
RB5
RW5
RB10
RW10
CHECKED BY
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com because we’re filmmakers too
Page 2
Getting to know your Rayden Lights
PRECAUTIONS
• Keep the fixture away from water and all flammable gases or liquids.
• Use ONLY the recommended batteries.
• Handle the unit with care.
• DO NOT attempt to disassemble or repair the unit without first contacting the service department at www.ikancorp.com
• Keep the unit clean and free of dust. The unit can be cleaned with a soft, dry cloth.
• Use ONLY parts provided by the manufacturer.
• Always use caution when plugging in the fixture.
Mounting the Rayden to a stand
The Rayden LED light comes with a pre-installed yoke and combo mount. This allows the fixture to easily sit and adjust on any
stand. The angled yoke allows the light to move freely, without obstruction. The Baby 5/8” and Junior 1-1/8” Combo pin give the
user a wide range of stands. The light can be mounted either horizontally or vertically on a 5/8” baby pin.
Power the LEDs
The Mylo light comes with an included AC power supply and 6 foot cable. This allows the user to plug into any standard 120-240v
electrical outlet. The Mylo LED light can be powered from one of two Sony “L” Style DV batteries that are supplied with the unit.
Adjusting the Color & Brightness of the Light
The Mylo LED light is controlled by the large yellow knob on the rear of the fixture. The knob was designed with the idea that it
could be reached and adjusted when the light is up on a stand. The knob has two push settings.
The default setting is the brightness from 10%-100% brightness.
By pressing in on the knob, the color temperature can be adjusted. (Bi-Color lights)
Changing the Pro Battery Plate
Adding or removing the pro battery plate on the back of your fixture can be easily achieved.
NOTE: The fixture comes pre-installed with the Gold-Mount battery plate.
The process starts with the removal of the four screws on the four corners of the plate.
Once the screws are removed, separate the plate from the back of the fixture.
Unplug the 2-pin connector from the fixture.
Store the screws and the Gold-Mount in a safe place.
Reattaching the V-Mount plate is a simple process.
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com because we’re filmmakers too
Page 3
Plug the wired 2-pin connector into the fixture where we just unplugged the Gold-Mount plate at the back of the light. Orient the
holes on the plate to match up with the screw holes on the back of the fixture. Using the screws supplied with the V-Mount plate,
screw in the plate until it is snug against the back of the fixture. Do not over-tighten the screws.
You’re now ready to install your battery to the V-Mount plate.
Remote Control
The light can be adjusted also using the RF remote control. The use of the remote allows for multiple lights to be connected, as well as
control of the brightness.
Remote Control Button Functions
• Press & Hold “A” for 5 seconds to sync remote control to light(s)
• Press “A” to power ON/OFF (for Daylight Light only)
• Press “A”& "B" to power ON/OFF (for Bi-Color Light only)
• Press “B” to adjust 4 levels of light intensity in increments of 25%
• Press and Hold “B” for 5 seconds to Enable/Disable sound
• Hold down “C” to increase light intensity 0%-100%
• Hold down “D” to decrease light intensity 100%-0%
Optional Accessories
Some other products that work well with the Rayden lights from Ikan include:
HD-STND
ROLLR-STND10
CP-STND-V3
SW-04
KCP-703
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com because we’re filmmakers too
Heavy Duty Light Stand
2 Stage Roller Stand 10 ft 6 in
Compact Light Stand Version 3
Safety Wire
Stage Clamp w/ 16mm Stud
Page 4
RB5
Rayden Bi-Color Half x 1 Studio & Field LED Light
Specifications
Fixture Specifications
Light Source 608 0.06 watt LEDs
Head Type Bi-Color 5600K-3200K
Lens 45 Degree
Beam Angle 50 Degree
Lumens 1218Lm
Control / Dimming Knob Control
Build Material Heavy Duty Resin Plastic
Cooling System Passive Cooling
Yoke Baby 5/8" -- Junior 1-1/8" Combo Pin
Fixture Size 14 x 8 x 3 in.
Fixture Weight 4 lbs
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com because we’re filmmakers too
Electrical Specifications
Power Supply Input: 110-220VAC
Output: 15VDC @ 4.0A
Fixture Power Consumption 36.4W; 14-18VDC
Remote Control Battery
Power Type
23A 12VDC
Page 5
RB10
Rayden Bi-Color 1 x 1 Studio & Field LED Light
Specifications
Fixture Specifications
Light Source 1184 0.06 watt LEDs
Head Type Bi-Color 5600K-3200K
Lens 45 Degree
Beam Angle 50 Degree
Lumens 4559Lm
Control / Dimming Knob Control
Build Material Heavy Duty Resin Plastic
Cooling System Passive Cooling
Yoke Baby 5/8" -- Junior 1-1/8" Combo Pin
Fixture Size 14 x 14 x 3 in.
Fixture Weight 6 lbs
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com because we’re filmmakers too
Electrical Specifications
Power Supply Input: 110-220VAC
Output: 15VDC @ 6.0A
Fixture Power Consumption 71W; 14-18VDC
Remote Control Battery
Power Type
23A 12VDC
Page 6
RW5
Rayden Daylight Half x 1 Studio & Field LED Light
Specifications
Fixture Specifications
Light Source 608 0.06 watt LEDs
Head Type Daylight 5600K
Lens 45 Degree
Beam Angle 50 Degree
Lumens 2506Lm
Control / Dimming Knob Control
Build Material Heavy Duty Resin Plastic
Cooling System Passive Cooling
Yoke Baby 5/8" -- Junior 1-1/8" Combo Pin
Fixture Size 14 x 8 x 3 in.
Fixture Weight 4 lbs
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com because we’re filmmakers too
Electrical Specifications
Power Supply Input: 110-220VAC
Output: 15VDC @ 4.0A
Fixture Power Consumption 36.4W; 14-18VDC
Remote Control Battery
Power Type
23A 12VDC
Page 7
RW10
Rayden Daylight LED 1 x 1 Light
Specifications
Fixture Specifications
Light Source 1184 0.06 watt LEDs
Head Type Daylight 5600K
Lens 45 Degree
Beam Angle 50 Degree
Lumens 4971Lm
Control / Dimming Knob Control
Build Material Heavy Duty Resin Plastic
Cooling System Passive Cooling
Yoke Baby 5/8" -- Junior 1-1/8" Combo Pin
Fixture Size 14 x 14 x 3 in.
Fixture Weight 6 lbs
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com because we’re filmmakers too
Electrical Specifications
Power Supply Input: 110-220VAC
Output: 15VDC @ 6.0A
Fixture Power Consumption 71W; 14-18VDC
Remote Control Battery
Power Type
23A 12VDC
Page 8
Learn More
More dynamic information at official website: www.ikancorp.com
Support
Contact email: support@ikancorp.com
CONDITIONS OF WARRANTY SERVICE
• Free service for one year from the day of purchase if the problem is caused by manufacturing errors.
• The components and maintenance service fee will be charged if the warranty period is expired.
Free Service will not be Provided in the Following Situations:(*Even if the product is still within the warranty period.)
• Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.
• Damage caused by natural disaster, abnormal voltage, and environmental factors, etc.
©2018 ikan Corporation. All rights reserved
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com because we’re filmmakers too
Loading...