IKAN HS-USB-MIC User guide

Manual

HS-USB-MIC

USB Condenser Cardioid Microphone w/ Gain Control

Condenser Microphone Specifications

• Sensitivity: -32 dB ± 2 dB

• Output Impedance: Low Impedance(<680Ω)

• Directivity: Unidirectional

• Frequency Range:100Hz-18000Hz

• Operation Voltage Range: DC-5V

• Max. Operation Voltage: DC-5V

• S/N Ratio: > 68dB

• Current Consumption: <0.5mA

• Standard Operation Voltage: DC-5V

• Max. Input Sound Pressure Level: 115dB

• Decreasing Voltage Characteristic: Within 3dB at 1V

Condenser Microphone Specifications

Polar Response
Power Requirements

1. The microphone is powered by your device’s USB
port, meaning that in most instances you can just
plug the microphone in and get started right away.
For non-standard USB ports, a powered USB hub
may be required.

2. This is a “plug/play” USB device, compatible with
both Windows and Mac computers.

3. An ideal starting point for the reference is to place
MIC directly in front of the vocalist. 15 cm (6”)
distance. Moving the vocalist, a little closer will
make the vocal sound more intimate and fuller, while
moving the vocalist back will give the vocal a little
more air or room sound, (you will hear increased
bass or low frequency response when the sound
source is very close to the mic).

4. Experimentation should be made with the angle from
which the microphone is set, as different results can
be achieved depending on the angle and distance of
the microphone.

General Operation

To manually adjust your input level via your computer’s
system preferences, use the following instructions
relevant to your device platform/operating system.

Microphone Setup

1. Plug one end of the USB cable into the USB port of
the microphone and connect the other end to the
computer. After connecting the audio cable, you can
start using the microphone.

2. If you need to adjust the gain control, turn the knob
on the front of the mic to the right.

Adjusting the input level on a Mac OS computer:

1. Click on the Apple symbol at the top left of your
screen and select System Preferences.

Accessing Mac OS System Preferences

2. Click on ‘Sound’ to open the sound options

Opening ‘Sound’ Options

3. Open the ‘Input’ tab

4. From here, select the ‘USB AUDIO’ from the list of
devices, and adjust the input level using the slider.

Adjusting Mic Input Level

Adjusting the input level on a Windows computer:

1. Open the Start menu and type ‘Sound Settings’

Accessing Windows Control Panel

2. Once the “Sound Settings” section is highlighted,
push enter to open the sound settings menu

Opening ‘Sound settings

3. Under the input, click the dropdown menu and make

sure the ‘USB AUDIO’ device is selected from the list
of devices.

Selecting Input Device

4. To adjust the input level, click “Device properties” in
the sound settings menu.

Adjusting Mic Input Level

5. Once the ‘Device Properties’ menu is open, you can

adjust the Volume slider.

Adjusting Mic Input Level

Notes

1. Do not cover the microphone grille with your hand.

2. Regular maintenance is recommended to avoid

electricity and acoustic problems.

Warranty

For warranty information, please visit the following link
or scan the QR Code

https://ikancorp.com/support/return-refund-policy/

Support

Contact email: [e-mail]

CONDITIONS OF WARRANTY SERVICE

• Free service for one year from the day of purchase if
the problem is caused by manufacturing errors.

• The components and maintenance service fee will be
charged if the warranty period is expired.

Free Service will not be Provided in the Following
Situations:(*Even if the product is still within the

warranty period.)

• Damage caused by abuse or misuse, dismantling, or
changes to the product not made by the company.

• Damage caused by natural disaster, abnormal voltage,
and environmental factors, etc.

©2021Ikan International. All rights reserved.